Casablanca 77xxD - Manuals - manualsarea.com

Page 2 - Calculation of 32; SLOPED CEILING INSTALLATIONS; Pole Length

2 Calculation of 32 ° Use the tear-off Ceiling Angle Template card inserted in the back of this manual, it provides you with a simple ‘go’ or‘no-go’ for installing your fan on a sloped ceiling. SLOPED CEILING INSTALLATIONS MOUNTING RECOMMENDATIONS 7 ′ MINIMUM Pole Length StandardStandard 6 ″ 12 ″ 12...

Page 3 - TOPIAN; FAN PREPARATION; IMPORTANT SAFETY INFORMATION!

3 PREPARATION INSTRUCTIONS Unpacking: Before assembling and installing your ceiling fan, remove all parts from the shipping cartons and check themagainst the parts listed here. Before discarding packaging material, be certain that all parts have been removed. PERMA•LOCK™ HARDWARE U TOPIAN FAN PREPAR...

Page 4 - CEILING HARDWARE; Installing a New Ceiling Fixture Outlet Box

4 CROSSBAR MOUNTING BRACKET INSTALLATION CANOPY HARDWARE CANOPY CANOPY HATCH CANOPY LOCK WASHER (4) CANOPY SCREW (4) U TOPIAN CEILING HARDWARE CROSSBAR MOUNTING BRACKET WIRE NUT (4) GETTING STARTED Installing a New Ceiling Fixture Outlet Box If you do not have an existing fixture located where you w...

Page 5 - Step 4b. Pull Chain Connections

5 HANGING THE FAN Step 3. To hang the fan body in the canopy, hold the fan body firmly and in-sert the ball into the canopy opening.Check that no wires were pinched. Ro-tate the fan body until the slot in theball fits into the pin opposite the canopyopening. CAPPED BLUE D1-OPTION WIRE PIN SLOT BALL ...

Page 6 - RUBBER GROMMET INSTALLATION; CORRECT INSTALLATION

6 RUBBER GROMMET (4 PER BLADE) BLADE SCREW (4 PER BLADE) BLADE TO BLADE HOLDER INSTALLATION BLADE & BLADE HOLDER HARDWARE BLADE HOLDER BLADE HOLDER SCREW (2 PER BLADE) Step 8. Insert a rubber grommet through each blade hole of every blade. Inspectboth sides of the blade to assure thatthe lips of...

Page 7 - BLADE/BLADE HOLDER INSTALLATION; BLADE INSTALLATION; REMOVE SHIPPING BLOCKS

7 BLADE/BLADE HOLDER INSTALLATION Step 11. Using the five screws removed in Step 10, and the five additional screws fromthe pack, attach each blade/blade holder as-sembly to the motor. Using the screwdriver, tighten securely by hand only. Step 9. Attach each blade to a blade holder securing it with ...

Page 8 - INSTALL SWITCH HOUSING CAP SCREWS

8 Step 12. Remove the two screws of the switch housing cap. Set the cap and screwsaside for use in Step 15. REMOVE SWITCH HOUSING CAP SCREWS Step 13. Install 2 of the 3 switch housing screws onto the fan adapter plate, leaving 1 ⁄ 8 " threads visible. Feed the wire connec- tor from the fan throu...

Page 9 - OPERATION; OPTIONAL LIGHT FIXTURE INSTALLATION; canopy; TROUBLESHOOTING

9 3-SPEED ♦ OPERATION FAN WILL NOT START Check main circuit fuses, circuit breakers, or wall switch position.Check all wire connections, making sure the power is turned off during this inspection.Check that reverse switch is not set in center of throw. FAN WOBBLES OR SHAKES Be sure canopy pin is pro...

Page 10 - Product SPecificationS

Product SPecificationS Model name: Utopian ® Model number: 77xxD dimensions: A = 10.7" B = 12.22" C = 3" D = 11.2" E = 5.6" Weight: 25 lbs. Motor: 172mm x 20mm Direct Drive ™ Blade Span With: 50" Blade Pitch: 16° no. of Blades: 5 technology: 3-Speed Airflow: 6,152 cfm electri...