Casablanca 6411Z - Manuals - manualsarea.com

Page 3 - etropolitan; ImPORTANT SAFeTY INFORmATION!

3 InSTAllATIon InSTRUCTIonS unpacking: before assembling and installing your ceiling fan, remove all parts from the shipping cartons and check them against the parts listed here. before discarding packaging material, be certain that all parts have been removed. CEIlIng hARDwARE CRoSSBAR moUnTIng BRA...

Page 5 - CAnopy ElECTRICAl ConnECTIonS; CAnopy hATCh InSTAllATIon

5 Step 3. To hang the fan body in the canopy, hold the fan body firmly and insert the nylon ball into the canopy opening. Check that no wires were pinched. Rotate the fan body until the slot in the nylon ball fits into the pin opposite the canopy opening. pIn SloT BAll CAnopy ElECTRICAl ConnECTIonS ...

Page 8 - To avoid possible electrical shock, make cer-; W-85 ContRol inStallation

® 3 8 wAll ConTRol AnD hARDwARE (not to scale) Switch mounting Screws (2) Wall Plate Screws (2) White (2) Almond White Wall Plate(1) W-85 Wall Control Switch bezels (1) White (1) Almond Almond Wall Plate(1) (4) Wire Cap before installing the W-85 wall control you will need to check and see if you wi...

Page 9 - ContinUED

® 3 9 Figure #5 AlmonD BEZEl BEZEl TABS BEZEl AlIgnmEnT pIn AnD holE Figure #3 AlmonD BEZEl RUBBER KEy pAD loCATIng pInS (4) W-85 Wall Control Bezel replacement: - ContinUED Step 13c. Reinstall the rubber key pad on to the four (4) locating pins located on the almond bezel as shown in Figure #3 and ...

Page 10 - Wall Control; single W-85 installation

® 3 10 inStalling thE W-85 Wall ContRol W-85 ContRol inStallation 1. use only the Casablanca W-85 wall control. 2. do not use any additional control with your Inteli- Touch 3 fan (for example, dimmer, or fan speed control). 3. do not use more than one fan per wall control. 4. No other light fixtures...

Page 12 - oPERation PoWER; oPERation SPEED ContRol; oPERation REvERSing aiRFloW; to vary the light brightness:; oPERation lightS; Light Operation

® 3 12 oPERation PoWER The button is normally left in the on position. Always turn the power off during cleaning or servicing the fan and during thunderstorms. It is also used to exit or enter additional programs. The button must be left on to retain a previously set fan speed or light level. oPERat...

Page 13 - Changing FREqUEnCy SEtting; NOTE: All fans leave the factory set to; aUtomatiC DEmonStRation PRogRam; to enter the demonstration program:

® 3 13 Changing FREqUEnCy SEtting NOTE: All fans leave the factory set to “1111” You will only have to change the dip switch settings in the remote if you are using more than one fan in the same area and want to control them separately. DiP SWitChES DiP SWitChES SEt to ‘1111’ (Factory Setting) DiP S...

Page 15 - PRogRam; OFF for at least 5 seconds.

® 3 15 oPERation Fan-minDER ™ PRogRam The Fan-minder feature will add to your comfort when used in the bedroom. The program reduces the speed of the fan each two-hour interval to compensate for cooling night air. To enter the Fan-minder Program: 1. Turn the OFF for at least 5 seconds. 2. Turn the ON...

Page 16 - troubleshooting tips; pRoBlEm

® 3 16 Please refer to this troubleshooting guide before requesting service or contacting your dealer for assistance. troubleshooting tips This device complies with RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) t...

Page 17 - proDuCt speCiFiCations; metropolitan

17 proDuCt speCiFiCations model Name: metropolitan ® model Number: 64xxZdimensions: A = 12" b = 12.2" C = 3" d = 12" e = 5.6" Weight: 25 lbs. motor: XLP-2000 ® blade Span: 44” & 54" blade Iron Pitch: 15° No. of blades: 5 Technology: Inteli•Touch ® 3 W-85 Airflow: 6,003 cf...