Casablanca 59119 - Manuals - manualsarea.com

Page 2 - What to Expect with Your Installation; qualified electrician.; Read and Save These Instructions; WARNINGS; CAUTIONS; Standard Downrod; for ceilings 8-10 feet high; Shorter Downrod; for ceilings 10 feet or higher

www.CasablancaFanCo.com 1.888.227.2178 www.CasablancaFanCo.com 1.888.227.2178 www.CasablancaFanCo.com 1.888.227.2178 What to Expect with Your Installation Know your wiring If you are unfamiliar with wiring, use a qualified electrician. You may need a friend to help you. Check box to see fan weight A...

Page 3 - Tools Needed; Ladder

www.CasablancaFanCo.com 1.888.227.2178 3 M8519-01 • 10/30/14 • © Casablanca Fan Company Tools Needed Ladder Screwdrivers Pliers Wire Strippers Power Drill (optional) 9/64” Drill Bit (optional) If mounting to a support structure, you will also need these tools.

Page 4 - TU; Mounting Options; Use Standard Mounting; or; Use Angled Mounting; to hang the fan from a; OPTION; OPTION; SLIDE; PLACE; FOLD

www.CasablancaFanCo.com 1.888.227.2178 4 M8519-01 • 10/30/14 • © Casablanca Fan Company If you have an angled ceiling: 1. You will need a longer downrod (sold separately) . 2. If your ceiling angle is greater than 34°, you will also need an Angled Mounting Kit (sold separately) . Guide Touches BOTH ...

Page 5 - Ceiling Bracket; For angled ceilings, point; OFF; Turn P

www.CasablancaFanCo.com 1.888.227.2178 1.888.227.2178 www.CasablancaFanCo.com Ceiling Bracket Refer to warning w.1 on pg. 2 To avoid possible electrical shock, before installing your fan, disconnect the power by turning off the circuit breakers to the outlet box associated with the wall switch locat...

Page 6 - Blades; Blade; Install the blade assembly screws, found

www.CasablancaFanCo.com 1.888.227.2178 M8519-01 • 10/30/14 • © Casablanca Fan Company Slide each blade onto a blade iron through the slot in the blade. Ensure the screw holes in the blade are aligned with the screw holes in the blade iron. Blades 6 Blade Iron Install the blade assembly screws, found...

Page 7 - Motor Housing; Place the upper motor housing on top of; Upper

www.CasablancaFanCo.com 1.888.227.2178 7 M8519-01 • 10/30/14 • © Casablanca Fan Company Motor Housing Place the upper motor housing on top of the fan assembly as shown and align the screw holes. Attach the upper motor housing to the fan using three upper motor housing screws found in the hardware ba...

Page 8 - Downrod; Slid; for angled; Option 1; skip to next page; If you need a different downrod length follow these steps:; Steps 1-5 to remove standard downrod pipe; Steps 6-10 to reassemble with new; pipe

www.CasablancaFanCo.com 1.888.227.2178 Downrod Slid e Slid e 1 2 3 4 5 6 7 8 9 10 Sold S epar at ely Included Longer Downrod for angled ceilings or ceilings 10’ or higher Shorter Downrod for fans installed close to ceiling Standard Downrod for ceilings 8-10’ high Option 1 Option 2 Option 3 skip to n...

Page 9 - Remove the pre-installed

www.CasablancaFanCo.com 1.888.227.2178 KEEP! 8” 3/8” CU T & ST R IP (not to scale) Remove the pre-installed setscrew so that the downrod can be inserted. Hand tighten the downrod (at least 4-5 full turns) until it stops. The wires can be cut, but leave at least 8” extending from the top of the d...

Page 10 - DO NOT PICK THE FAN UP BY THE; Place the downrod

www.CasablancaFanCo.com 1.888.227.2178 10 M8519-01 • 10/30/14 • © Casablanca Fan Company Downrod (continued) DO NOT PICK THE FAN UP BY THE CANOPY OR WIRES. Place the downrod ball into the slot in the ceiling bracket. Put the wires and downrod through the canopy. Let the canopy sit loosely on top of ...

Page 11 - Wiring; Place the receiver on top of the downrod; Using an orange wire connector

www.CasablancaFanCo.com 1.888.227.2178 11 M8519-01 • 10/30/14 • © Casablanca Fan Company Wiring Turn the splices upward and push them carefully back through the hanger bracket into the outlet box. Spread the wires apart, with the grounded wires on one side of the outlet box and the ungrounded wires ...

Page 12 - Using the wire connectors from the; Using an orange wire connector from

www.CasablancaFanCo.com 1.888.227.2178 12 M8519-01 • 10/30/14 • © Casablanca Fan Company F R O M RECE IVER whit e black blue whit e (common out) black (fan out) blue (ligh t out) Using the wire connectors from the remote control hardware bag: • Connect the white wire from the receiver (marked “commo...

Page 13 - Wall Control

www.CasablancaFanCo.com 1.888.227.2178 13 M8519-01 • 10/30/14 • © Casablanca Fan Company 1. Using a 9/64 drill bit, drill a hole in each screw cut-out on the wall control template. 2. Using a hammer, tap a drywall anchor found in the wall control hardware bag into each hole until the drywall anchor ...

Page 14 - Canopy; Lift the canopy into place so that; Screw; Insert the two canopy screws

www.CasablancaFanCo.com 1.888.227.2178 14 M8519-01 • 10/30/14 • © Casablanca Fan Company Canopy Lift the canopy into place so that the screw holes are aligned. Position the canopy so that, when lifted into place, the canopy fits into the hanging bracket as shown. Screw Holes Insert the two canopy sc...

Page 15 - Operation; Power; ON; If your need to pair your remote, turn fan; fans within range while pairing.

www.CasablancaFanCo.com 1.888.227.2178 M8519-01 • 10/30/14 • © Casablanca Fan Company 15 Operation Fan Power 4 Before operating the wall control, press on the battery door to eject it. Unscrew the battery holder. Insert the battery, found in the control hardware bag, with the positive (+) side facin...

Page 17 - Maintenance & Cleaning; Cleaning the fan - use soft brushes or cloths; to prevent scratching. Cleaning products may

www.CasablancaFanCo.com 1.888.227.2178 Maintenance & Cleaning Cleaning the fan - use soft brushes or cloths to prevent scratching. Cleaning products may damage the finishes. Be sure to turn off power to the fan before performing any maintenance or relamping. OFF Turn P ow er Casablanca fans have...

Page 18 - Troubleshooting; Excessive wobbling; AUTHORIZED SERVICE

www.CasablancaFanCo.com 1.888.227.2178 18 M8519-01 • 10/30/14 • © Casablanca Fan Company Troubleshooting Excessive wobbling • Tighten all of the blade screws until they are snug. • Turn the power off, suppor t the fan carefully, and check that the hanger ball is properly seated. • Use the provided b...