Casablanca 59077 - Manuals - manualsarea.com

Page 2 - What to Expect with Your Installation; qualified electrician.; Read and Save These Instructions; WARNINGS; CAUTIONS; Standard Downrod; for ceilings 8-10 feet high; Shorter Downrod; for ceilings 10 feet or higher

www.CasablancaFanCo.com 1.888.227.2178 www.CasablancaFanCo.com 1.888.227.2178 www.CasablancaFanCo.com 1.888.227.2178 What to Expect with Your Installation Know your wiring If you are unfamiliar with wiring, use a qualified electrician. You may need a friend to help you. Check box to see fan weight A...

Page 3 - Tools Needed; Ladder

www.CasablancaFanCo.com 1.888.227.2178 3 M8511-01 • 04/16/15 • © 2013–2015 Casablanca Fan Company Tools Needed Ladder Screwdrivers Pliers Wire Strippers Power Drill (optional) 9/64” Drill Bit (optional) If mounting to a support structure, you will also need these tools.

Page 4 - TU; Mounting Options; Use; Standard Mounting; or; Angled Mounting; to hang the fan from a; OPTION; OPTION; SLIDE; PLACE; FOLD

www.CasablancaFanCo.com 1.888.227.2178 4 M8511-01 • 04/16/15 • © 2013–2015 Casablanca Fan Company If you have an angled ceiling: 1. You will need a longer downrod (sold separately) . 2. If your ceiling angle is greater than 34°, you will also need an Angled Mounting Kit (sold separately) . Guide Tou...

Page 5 - Ceiling Bracket; For angled ceilings, point; OFF; Turn P

www.CasablancaFanCo.com 1.888.227.2178 1.888.227.2178 www.CasablancaFanCo.com Ceiling Bracket Refer to warning w.1 on pg. 2 To avoid possible electrical shock, before installing your fan, disconnect the power by turning off the circuit breakers to the outlet box associated with the wall switch locat...

Page 6 - Downrod; Slid; for angled; Option 1; skip to next page; If you need a different downrod length follow these steps:; Steps 1-5 to remove standard downrod pipe; new; pipe

www.CasablancaFanCo.com 1.888.227.2178 Downrod Slid e Slid e 1 2 3 4 5 6 7 8 9 10 Sold S epar at ely Included Longer Downrod for angled ceilings or ceilings 10’ or higher Shorter Downrod for fans installed close to ceiling Standard Downrod for ceilings 8-10’ high Option 1 Option 2 Option 3 skip to n...

Page 7 - setscrew so that the downrod; DO NOT

www.CasablancaFanCo.com 1.888.227.2178 KEEP! 8” 3/8” CU T & ST R IP (not to scale) Remove the pre-installed setscrew so that the downrod can be inserted. Hand tighten the downrod (at least 4-5 full turns) until it stops. The wires can be cut, but leave at least 8” extending from the top of the d...

Page 8 - The adapter cover is not; DO NOT PICK THE FAN UP BY

www.CasablancaFanCo.com 1.888.227.2178 8 M8511-01 • 04/16/15 • © 2013–2015 Casablanca Fan Company Downrod (continued) Note: The adapter cover is not used for low-profile mounting. Put the wires and downrod through the canopy. Let the canopy sit loosely on top of the fan. DO NOT PICK THE FAN UP BY TH...

Page 9 - Wiring; Using an orange wire connector; Place the receiver on top of the downrod

www.CasablancaFanCo.com 1.888.227.2178 9 M8511-01 • 04/16/15 • © 2013–2015 Casablanca Fan Company Wiring Turn the splices upward and push them carefully back through the hanger bracket into the outlet box. Spread the wires apart, with the grounded wires on one side of the outlet box and the unground...

Page 10 - Using the orange wire connectors

www.CasablancaFanCo.com 1.888.227.2178 10 M8511-01 • 04/16/15 • © 2013–2015 Casablanca Fan Company Turn the splices upward and push them carefully back through the hanger bracket into the outlet box. Spread the wires apart, with the grounded wires on one side of the outlet box and the ungrounded wir...

Page 11 - Wall Control

www.CasablancaFanCo.com 1.888.227.2178 11 M8511-01 • 04/16/15 • © 2013–2015 Casablanca Fan Company 1. Using a 9/64 drill bit, drill a hole in each screw cut-out on the wall control template. 2. Using a hammer, tap a drywall anchor found in the wall control hardware bag into each hole until the drywa...

Page 12 - Canopy; Lift the canopy into place so that

www.CasablancaFanCo.com 1.888.227.2178 12 M8511-01 • 04/16/15 • © 2013–2015 Casablanca Fan Company Canopy Note: Fan style may vary. Lift the canopy into place so that the screw holes are aligned. Position the canopy so that, when lifted into place, the canopy fits into the hanging bracket as shown. ...

Page 13 - Blades; Attach each blade to the fan using two

www.CasablancaFanCo.com 1.888.227.2178 M8511-01 • 04/16/15 • © 2013–2015 Casablanca Fan Company Blades 13 Attach each blade to the fan using two blade grommets, found in the hardware bag, and two blade assembly screws, found in the hardware bag. Insert a blade into the motor housing as shown.

Page 14 - Note: Be sure to use the CERAMIC wire; Align the screw holes and attach the; Light Kit; Align the screw holes in the light kit

www.CasablancaFanCo.com 1.888.227.2178 Using the ceramic wire connectors, connect the blue wire from the fan to the black wire from the light kit assembly. Connect the white wire from the fan to the white wire from the light kit assembly. Note: Be sure to use the CERAMIC wire connectors to avoid fir...

Page 16 - Operation; Holder; ON; The remote transmitter is already paired; If you would like to operate

www.CasablancaFanCo.com 1.888.227.2178 M8511-01 • 04/16/15 • © 2013–2015 Casablanca Fan Company 16 Operation Before operating the wall control, press on the battery door to eject it. Unscrew the battery holder. Insert the battery, found in the control hardware bag, with the positive (+) side facing ...

Page 17 - Quickly press the up or down arrow to turn the lights off; In warm weather

www.CasablancaFanCo.com 1.888.227.2178 Operation (continued) Quickly press the up or down arrow to turn the lights off and on. Hold the up or down arrow to raise or dim the light level. The reverse button changes the direction that the blades turn. The power button turns the fan off and on. Dimming ...

Page 18 - Maintenance & Cleaning; Cleaning the fan; Changing the bulb

www.CasablancaFanCo.com 1.888.227.2178 Maintenance & Cleaning Cleaning the fan - use soft brushes or cloths to prevent scratching. Cleaning products may damage the finishes. Be sure to turn off power to the fan before performing any maintenance or relamping. OFF Turn P ow er Changing the bulb - ...