Casablanca 59057 - Manuals

Casablanca 59057 – Manual in PDF format online.

Manuals:

Manual

Manual Casablanca 59057

Summary

Page 2 - What to Expect with Your Installation; qualified electrician.; Read and Save These Instructions; WARNINGS; CAUTIONS; Standard Downrod; for ceilings 8-10 feet high; Longer Downrod; for ceilings 10 feet or higher

www.CasablancaFanCo.com 1.888.227.2178 www.CasablancaFanCo.com 1.888.227.2178 www.CasablancaFanCo.com 1.888.227.2178 What to Expect with Your Installation Know your wiring If you are unfamiliar with wiring, use a qualified electrician. You may need a friend to help you. Check box to see fan weight A...

Page 3 - Tools Needed; Ladder

www.CasablancaFanCo.com 1.888.227.2178 3 M8506-01 • 10/30/14 • © Casablanca Fan Company Tools Needed Ladder Screwdrivers Pliers Wire Strippers Power Drill (optional) 9/64” Drill Bit (optional) If mounting to a support structure, you will also need these tools.

Page 4 - TU; Mounting Options; Use Standard Mounting; to hang the fan from a flat ceiling.; Use Angled Mounting; to hang the fan from a; OPTION; OPTION; SLIDE; PLACE; FOLD

www.CasablancaFanCo.com 1.888.227.2178 4 M8506-01 • 10/30/14 • © Casablanca Fan Company If you have an angled ceiling: 1. You will need a longer downrod (sold separately) . 2. If your ceiling angle is greater than 34°, you will also need an Angled Mounting Kit (sold separately) . Guide Touches BOTH ...

Page 5 - Ceiling Bracket; For angled ceilings, point; OFF; Turn P

www.CasablancaFanCo.com 1.888.227.2178 5 M8506-01 • 10/30/14 • © Casablanca Fan Company Ceiling Bracket Refer to warning w.1 on pg. 2 To avoid possible electrical shock, before installing your fan, disconnect the power by turning off the circuit breakers to the outlet box associated with the wall sw...

Page 6 - Downrod; Slid; Sold S; Longer; for angled; for ceilings 8-10’ high; Option 1; skip to next page; If you need a different downrod length follow these steps:; Steps 1-5 to remove standard downrod pipe; Steps 6-10 to reassemble with new; pipe; Included

www.CasablancaFanCo.com 1.888.227.2178 Downrod Slid e Slid e 1 2 3 4 5 6 7 8 9 10 Sold S epar at ely Longer Downrod for angled ceilings or ceilings 10’ or higher Standard Downrod for ceilings 8-10’ high Option 1 Option 2 skip to next page If you need a different downrod length follow these steps: St...

Page 7 - Remove the pre-installed

www.CasablancaFanCo.com 1.888.227.2178 Downrod (continued) KEEP! 8” 3/8” CU T & S T R IP (not to scale) Remove the pre-installed setscrew so that the downrod can be inserted. Slide the adapter cover onto the downrod, then hand tighten the downrod (at least 4-5 full turns) until it stops. The wir...

Page 8 - through the canopy. Let the; DO NOT PICK THE FAN UP BY; in the ceiling bracket.

www.CasablancaFanCo.com 1.888.227.2178 8 M8506-01 • 10/30/14 • © Casablanca Fan Company Downrod (continued) Put the wires and downrod through the canopy. Let the canopy sit loosely on top of the fan. DO NOT PICK THE FAN UP BY THE CANOPY OR WIRES. Place the downrod ball into the slot in the ceiling b...

Page 9 - Wiring; Place the receiver on top of the downrod; Using an orange wire connector

www.CasablancaFanCo.com 1.888.227.2178 9 M8506-01 • 10/30/14 • © Casablanca Fan Company Wiring Turn the splices upward and push them carefully back through the hanger bracket into the outlet box. Spread the wires apart, with the grounded wires on one side of the outlet box and the ungrounded wires o...

Page 10 - Use wire strippers to remove the; Using an orange wire connector from

www.CasablancaFanCo.com 1.888.227.2178 10 M8506-01 • 10/30/14 • © Casablanca Fan Company Use wire strippers to remove the crimp connector from the end of the red wire on the receiver. Using the wire connectors from the remote control hardware bag: • Connect the white wire from the receiver (marked “...

Page 11 - Wall Control

www.CasablancaFanCo.com 1.888.227.2178 11 M8506-01 • 10/30/14 • © Casablanca Fan Company 1. Using a 9/64 drill bit, drill a hole in each screw cut-out on the wall control template. 2. Using a hammer, tap a drywall anchor found in the wall control hardware bag into each hole until the drywall anchor ...

Page 12 - Canopy; Position the canopy so that, when; Screw; Insert the two canopy screws

www.CasablancaFanCo.com 1.888.227.2178 12 M8506-01 • 10/30/14 • © Casablanca Fan Company Canopy Note: Fan style may vary. Position the canopy so that, when lifted into place, the canopy fits into the hanging bracket as shown. Lift the canopy into place so that the screw holes are aligned. Screw Hole...

Page 13 - Blades

www.CasablancaFanCo.com 1.888.227.2178 M8506-01 • 10/30/14 • © Casablanca Fan Company Blades 13 Once the blade and medallion are attached, insert the blade iron into the slot on the blade ring and install the blade iron armature screws, found in the hardware bag. Once all five blades have been assem...

Page 14 - Light Kit; Screw three housing assembly screws

www.CasablancaFanCo.com 1.888.227.2178 Light Kit Make sure the light kit is securely attached to the motor housing. Failure to properly secure all three assembly screws could result in the light kit falling. Screw three housing assembly screws from the hardware bag halfway into the motor housing. Fe...

Page 15 - Note: Be sure to use the CERAMIC wire

www.CasablancaFanCo.com 1.888.227.2178 Tuck the wires into the light kit, then lift the light fixture and align the screw holes in the light fixture with the screw holes in the light kit. Install the three light fixture screws, found in the hardware bag. Install a halogen bulb in each socket. When n...

Page 16 - Carefully lift the globe so the threaded rod; Note: Do not use CFL bulbs to replace your light; Glass shade style and number of lights may vary.; Globe

www.CasablancaFanCo.com 1.888.227.2178 Light Kit (continued) Carefully lift the globe so the threaded rod on the light fixture goes through the hole in the globe. With the other hand, install the finial onto the threaded rod and tighten securely. Install an E12 bulb in each upper socket. Note: Do no...

Page 17 - Operation; Holder; ON; If your need to pair your remote, turn fan; fans within range while pairing.

www.CasablancaFanCo.com 1.888.227.2178 M8506-01 • 10/30/14 • © Casablanca Fan Company 17 Operation Before operating the wall control, press on the battery door to eject it. Unscrew the battery holder. Insert the battery, found in the control hardware bag, with the positive (+) side facing downward. ...

Page 19 - Maintenance & Cleaning; Cleaning the fan - use soft brushes or cloths; to prevent scratching. Cleaning products may; Changing the bulbs - remove the finial from the; threaded rod while supporting the globe with

www.CasablancaFanCo.com 1.888.227.2178 Maintenance & Cleaning Cleaning the fan - use soft brushes or cloths to prevent scratching. Cleaning products may damage the finishes. Be sure to turn off power to the fan before performing any maintenance or relamping. OFF Turn P ow er Changing the bulbs -...

Page 20 - Troubleshooting; Excessive wobbling; AUTHORIZED SERVICE

www.CasablancaFanCo.com 1.888.227.2178 20 M8506-01 • 10/30/14 • © Casablanca Fan Company Troubleshooting Excessive wobbling • Tighten all of the blade and blade iron screws until they are snug. • Turn the power off, suppor t the fan carefully, and check that the hanger ball is properly seated. • Use...