Casablanca 54103 - Manuals - manualsarea.com

Page 2 - What to Expect with Your Installation; qualified electrician.; Read and Save These Instructions; WARNINGS; CAUTIONS

www.CasablancaFanCo.com 1.888.227.2178 M6020-01 • 09/09/13 • © Casablanca Fan Company What to Expect with Your Installation Know your wiring If you are unfamiliar with wiring, use a qualified electrician. You may need a friend to help you. Check box to see fan weight Assess location 30 inches from b...

Page 3 - Tools Needed; Ladder

www.CasablancaFanCo.com 1.888.227.2178 Tools Needed Ladder Power Drill (optional) 9/64” Drill Bit (optional) Screwdrivers If mounting to a support structure, you will also need these tools. 3 M6020-01 • 09/09/13 • © Casablanca Fan Company

Page 4 - Ceiling Bracket; OFF; Turn P; Make sure all four bumpers are still attached.; Bumper

www.CasablancaFanCo.com 1.888.227.2178 Ceiling Bracket OFF Refer to warning w.1 on pg. 2 To avoid possible electrical shock, before installing your fan, disconnect the power by turning off the circuit breakers to the outlet box associated with the wall switch location. Turn P ow er 4 Use wood screws...

Page 5 - Preparation; Get a helper

www.CasablancaFanCo.com 1.888.227.2178 Ceiling Bracket (continued) Preparation Time Saver Tip: Get a helper to insert grommets, found in the hardware bag, into the blades while you’re doing the next couple of steps. www.CasablancaFanCo.com 1.888.227.2178 5 M6020-01 • 09/09/13 • © Casablanca Fan Comp...

Page 6 - Hanging the Fan; bracket. Be sure the ground wire attached; Locking

6 www.CasablancaFanCo.com 1.888.227.2178 M6020-01 • 09/09/13 • © Casablanca Fan Company Hanging the Fan While holding the wires out of the way, lift the motor assembly and place the square hanger into the opening in the ceiling bracket. Be sure the ground wire attached to the hanger faces out of the...

Page 7 - Wiring; To connect the wires,; For Dual Switches

www.CasablancaFanCo.com 1.888.227.2178 Wiring FR O M F A N F RO M C E I LING B RA CK E T F R O M FA N Using an orange wire connector from the hardware bag, connect the 3 grounding wires (green, green/yellow stripe, or bare copper) coming from the ceiling, fan, and hanging bracket. (G rounding) G ree...

Page 8 - in the hardware bag. Tighten all four; Motor Housing; and ceiling bracket. Turn the motor housing; not secured until the next step is complete.

www.CasablancaFanCo.com 1.888.227.2178 With a Phillips head screwdriver, install the four motor housing screws found in the hardware bag. Tighten all four screws securely. Motor Housing Screw Holes Motor Housing Screw Indentation Notch Raise the motor housing up over the motor and ceiling bracket. T...

Page 9 - Blades; Insert grommets found in the hardware

www.CasablancaFanCo.com 1.888.227.2178 M6020-01 • 09/09/13 • © Casablanca Fan Company Blades 9 Insert grommets found in the hardware bag into the holes in the blades, then secure each blade to a blade iron with screws found in the hardware bag. Lightly attach the blade irons to the motor with screws...

Page 10 - Switch Housing

10 www.CasablancaFanCo.com 1.888.227.2178 M6020-01 • 09/09/13 • © Casablanca Fan Company Feed the wire plug through the center hole of the upper switch housing, then wrap keyhole slots around the screws and twist counterclockwise. Screw two housing assembly screws from the hardware bag halfway into ...

Page 11 - Lift the lower switch housing up until the

11 www.CasablancaFanCo.com 1.888.227.2178 M6020-01 • 09/09/13 • © Casablanca Fan Company Switch Housing (continued) Make sure the lower switch housing is securely attached to the upper switch housing. Failure to properly secure all 3 assembly screws could result in the switch housing fixture falling...

Page 12 - Maintenance & Cleaning; The pull chain controls the; In warm weather, use; downward air flow pattern.; In cold weather, use upward; ON; For cleaning the fan, use soft; Reverse switch

www.CasablancaFanCo.com 1.888.227.2178 M6020-01 • 09/09/13 • © Casablanca Fan Company 12 Switch Housing (continued) Maintenance & Cleaning The pull chain controls the fan: from high to off. To switch the direction of air flow, move the reverse switch to the opposite position. In warm weather, us...

Page 13 - Troubleshooting; Excessive wobbling; • Tighten all of the blade and; Noisy Operation; • Tighten the blade and blade; Fan doesn’t work; Make sure power switch is on.

www.CasablancaFanCo.com 1.888.227.2178 M6020-01 • 09/09/13 • © Casablanca Fan Company 13 Troubleshooting Excessive wobbling • Tighten all of the blade and blade iron screws until they are snug. • Use the provided balancing k it and instructions to balance the fan. Noisy Operation • Tighten the blade...