Page 2 - What to Expect with Your Installation; qualified electrician.; Standard Downrod; than 34° will require an; Read and Save These Instructions; WARNINGS; CAUTIONS
www.CasablancaFanCo.com 1.888.227.2178 www.CasablancaFanCo.com 1.888.227.2178 www.CasablancaFanCo.com 1.888.227.2178 What to Expect with Your Installation Know your wiring If you are unfamiliar with wiring, use a qualified electrician. You may need a friend to help you. Check box to see fan weight A...
Page 3 - Tools Needed; Ladder
www.CasablancaFanCo.com 1.888.227.2178 3 M8501-01 • 01/21/14 • © Casablanca Fan Company Tools Needed Ladder Power Drill (optional) 9/64” Drill Bit (optional) Screwdrivers Pliers Wire Strippers If mounting to a support structure, you will also need these tools.
Page 4 - TU; TU; Mounting Options; Use; Standard Mounting; or; Angled Mounting; to hang the fan from a; OPTION; SLIDE; PLACE; FOLD
www.CasablancaFanCo.com 1.888.227.2178 4 M8501-01 • 01/21/14 • © Casablanca Fan Company If you have an angled ceiling: 1. You will need a longer downrod (sold separately) . 2. If your ceiling angle is greater than 34°, you will also need an Angled Mounting Kit (sold separately) . Guide Touches BOTH ...
Page 5 - Ceiling Bracket; OFF; Make sure all four bumpers are; If you are unable to do this,; Turn P
www.CasablancaFanCo.com 1.888.227.2178 1.888.227.2178 www.CasablancaFanCo.com Ceiling Bracket OFF Make sure all four bumpers are still attached. For angled ceilings, point opening toward peak. Refer to warning w.1 on pg. 2 To avoid possible electrical shock, before installing your fan, disconnect th...
Page 6 - Preparation; DISCA
www.CasablancaFanCo.com 1.888.227.2178 Ceiling Bracket (continued) Preparation 1.888.227.2178 www.CasablancaFanCo.com DISCA RD KEEP! Remove the shipping blocks from the motor. Save the screws. They will be needed for blade iron installation. Note: Some fans will have a shipping ring instead of shipp...
Page 7 - Downrod; Slid; Option 1; skip to next page; If you need a different downrod length follow these steps:; Steps 1-5 to remove standard downrod pipe; new; pipe
www.CasablancaFanCo.com 1.888.227.2178 Downrod Slid e Slid e 1 2 3 4 5 6 7 8 9 10 Sold S epar at ely Included Longer Downrod for angled ceilings or ceilings 10’ or higher Shorter Downrod for fans installed close to ceiling Standard Downrod for ceilings 8-10’ high Option 1 Option 2 Option 3 skip to n...
Page 8 - Tighten the setscrew; DO NOT; The wires can be cut, but
www.CasablancaFanCo.com 1.888.227.2178 KEEP! Remove the pre-installed setscrew so that the downrod can be inserted. Downrod (continued) 8” 3/8” Tighten the setscrew with pliers. DO NOT HAND TIGHTEN. If the setscrew is not tightened securely, the fan may fall. KEEP! 8” 3/8” CU T & S T R IP (not t...
Page 9 - DO NOT PICK THE FAN UP BY; Place
www.CasablancaFanCo.com 1.888.227.2178 9 M8501-01 • 01/21/14 • © Casablanca Fan Company Downrod (continued) Put the wires and downrod through the canopy. Let the canopy sit loosely on top of the fan. DO NOT PICK THE FAN UP BY THE CANOPY OR WIRES. Place the downrod ball into the slot in the ceiling b...
Page 10 - Wiring; To connect the wires,; For Dual Switches
www.CasablancaFanCo.com 1.888.227.2178 Wiring Turn the splices upward and push them carefully back through the hanger bracket into the outlet box. Spread the wires apart, with the grounded wires on one side of the outlet box and the ungrounded wires on the other side of the outlet box. Refer to CAUT...
Page 11 - Canopy; Lift the canopy into place so that; Screw; Insert the two canopy screws
www.CasablancaFanCo.com 1.888.227.2178 11 M8501-01 • 01/21/14 • © Casablanca Fan Company Canopy Note: Fan style may vary. Lift the canopy into place so that the screw holes are aligned. Position the canopy so that, when lifted into place, the canopy fits into the hanging bracket as shown. Screw Hole...
Page 12 - Blades; need them plus five more from
www.CasablancaFanCo.com 1.888.227.2178 M8501-01 • 01/21/14 • © Casablanca Fan Company Blades Your blades are shielded with Dust Armor® which is a nanotechnology coating that repels dust. For cleaning the fan, use soft brushes or cloths to prevent scratching. Cleaning agents may damage the finishes. ...
Page 13 - Switch Housing
www.CasablancaFanCo.com 1.888.227.2178 Switch Housing Make sure the upper switch housing is securely attached to the mounting plate. Failure to properly secure all 3 assembly screws could result in the switch housing fixture falling. Feed the wire plug through the center hole of the upper switch hou...
Page 14 - Light Kit; Want to install your fan without a light kit?; “How do I install my fan without the light kit?”
www.CasablancaFanCo.com 1.888.227.2178 Light Kit Make sure the lower switch housing is securely attached to the upper switch housing. Failure to properly secure all 3 assembly screws could result in the switch housing fixture falling. Want to install your fan without a light kit? Go to www.Casablanc...
Page 15 - Light
www.CasablancaFanCo.com 1.888.227.2178 Light Kit (continued) CONGRATULATIONS! YOU’RE DONE! See next page for fan operation instructions. Note: Glass shade style and number of lights may vary. Connect the appropriate pull chain pendant to each of the short chains coming from the finial and finial cap...
Page 16 - Operation; The fan pull chain controls the fan:; ON
www.CasablancaFanCo.com 1.888.227.2178 Operation The fan pull chain controls the fan: from high to off. The light pull chain controls the power to the light fixture: on and off. To switch the direction of air flow, move the reverse switch to the opposite position. Reverse Switch Be sure to turn powe...
Page 17 - Maintenance & Cleaning; Cleaning the fan; Be sure to turn off; Changing the bulbs; - unscrew the finial and; Globe
www.CasablancaFanCo.com 1.888.227.2178 Maintenance & Cleaning Cleaning the fan - use soft brushes or cloths to prevent scratching. Cleaning products may damage the finishes. Be sure to turn off power to the fan before performing any maintenance or relamping. OFF Turn P ow er Changing the bulbs -...
Page 18 - For the most updated listing of Casablanca Authorized; Fan doesn’t work; Make sure power switch is on.; Excessive wobbling; iron screws until they are snug.
www.CasablancaFanCo.com 1.888.227.2178 18 M8501-01 • 01/21/14 • © Casablanca Fan Company Troubleshooting AUTHORIZED SERVICE CENTERS For the most updated listing of Casablanca Authorized Service Centers, visit www.CasablancaFanCo.com or call toll free 1-888-227-2178. Fan doesn’t work • Make sure powe...