Casablanca 54031 - Manuals

Casablanca 54031 – Manual in PDF format online.

Manuals:

Manual

Manual Casablanca 54031

Summary

Page 2 - What to Expect with Your Installation; qualified electrician.; Read and Save These Instructions; WARNINGS; CAUTIONS; Standard Downrod; for ceilings 8-10 feet high; Shorter Downrod; for ceilings 10 feet or higher

www.CasablancaFanCo.com 1.888.227.2178 M6010-01 • 10/30/14 • © Casablanca Fan Company What to Expect with Your Installation Know your wiring If you are unfamiliar with wiring, use a qualified electrician. You may need a friend to help you. Check box to see fan weight Assess location 30 inches from b...

Page 3 - Tools Needed; Ladder

www.CasablancaFanCo.com 1.888.227.2178 Tools Needed Ladder Power Drill (optional) 9/64” Drill Bit (optional) Screwdrivers Pliers Wire Strippers If mounting to a support structure, you will also need these tools. 3 M6010-01 • 10/30/14 • © Casablanca Fan Company

Page 4 - TU; Mounting Options; Use Standard Mounting; or; Use Angled Mounting; to hang the fan from a; OPTION; OPTION; SLIDE; PLACE; FOLD

www.CasablancaFanCo.com 1.888.227.2178 If you have an angled ceiling: 1. You will need a longer downrod (sold separately) . 2. If your ceiling angle is greater than 34°, you will also need an Angled Mounting Kit (sold separately) . Guide Touches BOTH Ceiling & Wall SI TU AT IO N 1 Guide Touches ...

Page 5 - Ceiling Bracket; For angled ceilings, point; OFF; Turn P

1.888.227.2178 www.CasablancaFanCo.com Ceiling Bracket 5 Refer to warning w.1 on pg. 2 To avoid possible electrical shock, before installing your fan, disconnect the power by turning off the circuit breakers to the outlet box associated with the wall switch location. For angled ceilings, point openi...

Page 6 - Preparation; DISCA; ring instead of shipping blocks. Please

www.CasablancaFanCo.com 1.888.227.2178 Preparation DISCA RD KEEP! Remove the shipping blocks from the motor. Save the screws. They will be needed for blade iron installation. Note: Some fans will have a shipping ring instead of shipping blocks. Please remove the ring and save the screws. Time Saver ...

Page 7 - Downrod; Slid; for angled; Option 1; skip to next page; If you need a different downrod length follow these steps:; Steps 1-5 to remove standard downrod pipe; Steps 6-10 to reassemble with new; pipe

1.888.227.2178 Downrod Slid e Slid e 1 2 3 4 5 6 7 8 9 10 Sold S epar at ely Included Longer Downrod for angled ceilings or ceilings 10’ or higher Shorter Downrod for fans installed close to ceiling Standard Downrod for ceilings 8-10’ high Option 1 Option 2 Option 3 skip to next page If you need a d...

Page 8 - Remove the pre-installed

KEEP! 8” 3/8” CU T & ST R IP (not to scale) Remove the pre-installed setscrew so that the downrod can be inserted. Hand tighten the downrod (at least 4-5 full turns) until it stops. The wires can be cut, but leave at least 8” extending from the top of the downrod. Downrod (continued) 8” 3/8” Tig...

Page 9 - DO NOT PICK THE FAN UP BY THE; Place the downrod

www.CasablancaFanCo.com 1.888.227.2178 9 M6010-01 • 10/30/14 • © Casablanca Fan Company Downrod (continued) Put the wires and downrod through the canopy. Let the canopy sit loosely on top of the fan. DO NOT PICK THE FAN UP BY THE CANOPY OR WIRES. Place the downrod ball into the slot in the ceiling b...

Page 10 - Wiring; Place the receiver on top of the downrod; Using an orange wire connector

www.CasablancaFanCo.com 1.888.227.2178 10 M6010-01 • 10/30/14 • © Casablanca Fan Company Wiring Turn the splices upward and push them carefully back through the hanger bracket into the outlet box. Spread the wires apart, with the grounded wires on one side of the outlet box and the ungrounded wires ...

Page 11 - Using the wire connectors from the; Using an orange wire connector from

www.CasablancaFanCo.com 1.888.227.2178 11 M6010-01 • 10/30/14 • © Casablanca Fan Company F R O M RECE IVER whit e black blue whit e (common out) black (fan out) blue (ligh t out) Using the wire connectors from the remote control hardware bag:• Connect the white wire from the receiver (marked “common...

Page 12 - Wall Control

www.CasablancaFanCo.com 1.888.227.2178 1. Using a 9/64 drill bit, drill a hole in each screw cut-out on the wall control template. 2. Using a hammer, tap a drywall anchor found in the wall control hardware bag into each hole until the drywall anchor is flush with the wall. 1. Using a drywall punch s...

Page 13 - Canopy; Lift the canopy into place so that; Screw; Insert the two canopy screws

www.CasablancaFanCo.com 1.888.227.2178 13 M6010-01 • 10/30/14 • © Casablanca Fan Company Canopy Note: Fan style may vary. Lift the canopy into place so that the screw holes are aligned. Position the canopy so that, when lifted into place, the canopy fits into the hanging bracket as shown. Screw Hole...

Page 14 - Blades; need them plus five more from

www.CasablancaFanCo.com 1.888.227.2178 M6010-01 • 10/30/14 • © Casablanca Fan Company Blades Your blades are shielded with Dust Armor® which is a nanotechnology coating that repels dust. For cleaning the fan, use soft brushes or cloths to prevent scratching. Cleaning agents may damage the finishes. ...

Page 15 - Switch Housing; twist counterclockwise.

www.CasablancaFanCo.com 1.888.227.2178 Switch Housing Make sure the upper switch housing is securely attached to the mounting plate. Failure to properly secure all 3 assembly screws could result in the switch housing fixture falling. Feed the wire plug through the center hole of the upper switch hou...

Page 16 - holes line up with the screw holes in the; Light Kit; Connect the plugs from the upper and lower; Want to install your fan without a light kit?

www.CasablancaFanCo.com 1.888.227.2178 Lift the lower switch housing up until the holes line up with the screw holes in the upper switch housing. Light Kit Connect the plugs from the upper and lower switch housings. Make sure to line up the colored markings on the connectors. Insert the three switch...

Page 17 - Note: Glass shade style and number of lights may vary.; Install a bulb into each of; Shade; Connect the pull chain pendants

www.CasablancaFanCo.com 1.888.227.2178 Light Kit (continued) CONGRATULATIONS! YOU’RE DONE! Note: Glass shade style and number of lights may vary. See next page for fan operation instructions. Install a bulb into each of the sockets. When necessary, replace with bulbs of the same type and wattage. To...

Page 18 - Operation; Holder; ON; If your need to pair your remote, turn fan; fans within range while pairing.

www.CasablancaFanCo.com 1.888.227.2178 18 M6010-01 • 10/30/14 • © Casablanca Fan Company 18 Operation Before operating the wall control, press on the battery door to eject it. Unscrew the battery holder. Insert the battery, found in the control hardware bag, with the positive (+) side facing downwar...

Page 20 - Maintenance & Cleaning; cloths to prevent scratching. Cleaning; The light pull chain controls the power; Light Pull

www.CasablancaFanCo.com 1.888.227.2178 M6010-01 • 10/30/14 • © Casablanca Fan Company 20 Maintenance & Cleaning For cleaning the fan, use soft brushes or cloths to prevent scratching. Cleaning products may damage the finishes. Be sure to turn off power to the fan before performing any maintenanc...

Page 21 - Troubleshooting; Excessive wobbling; AUTHORIZED SERVICE

www.CasablancaFanCo.com 1.888.227.2178 21 M6010-01 • 10/30/14 • © Casablanca Fan Company Troubleshooting Excessive wobbling • Tighten all of the blade and blade iron screws until they are snug. • Turn the power off, suppor t the fan carefully, and check that the hanger ball is properly seated. • Use...