Casablanca 53194 - Manuals - manualsarea.com

Page 2 - What to Expect with Your Installation; Read and Save These Instructions; WARNINGS; CAUTIONS; Standard Downrod

www.CasablancaFanCo.com 1.888.227.2178 2 M6002-01 • 08/08/12 • © Casablanca Fan Company What to Expect with Your Installation Know your wiring If you are unfamiliar with wiring, use a qualified electrician. You may need a friend to help you. Check box to see fan weight Assess location 30 inches from...

Page 3 - Tools Needed

www.CasablancaFanCo.com 1.888.227.2178 3 M6002-01 • 08/08/12 • © Casablanca Fan Company Tools Needed Ladder Power Drill (optional) 9/64” Drill Bit (optional) Screwdrivers Pliers Wire Strippers If mounting to a support structure, you will also need these tools.

Page 4 - TU; Mounting Options; Standard Mounting; Angled Mounting; OPTION; OPTION; SLIDE; PLACE; FOLD

www.CasablancaFanCo.com 1.888.227.2178 4 M6002-01 • 08/08/12 • © Casablanca Fan Company If you have an angled ceiling: 1. You will need a longer downrod (sold separately) . 2. If your ceiling angle is greater than 34°, you will also need an Angled Mounting Kit (sold separately) . Guide Touches BOTH ...

Page 5 - Ceiling Bracket Installation; OFF; Turn P

www.CasablancaFanCo.com 1.888.227.2178 5 M6002-01 • 08/08/12 • © Casablanca Fan Company 1.888.227.2178 www.CasablancaFanCo.com Ceiling Bracket Installation OFF Make sure all four (4) bumpers are still attached. For angled ceilings, point opening toward peak. Refer to warning w.1 on pg. 2 To avoid po...

Page 6 - Preparation; DISCA

www.CasablancaFanCo.com 1.888.227.2178 6 M6002-01 • 08/08/12 • © Casablanca Fan Company Ceiling Bracket Installation (continued) Preparation DISCA RD KEEP! Remove the shipping blocks from the motor. Save the five screws. They will be needed for blade iron installation. Time Saver Tip: Get a helper t...

Page 7 - Option 1; skip to next page; If you need a different downrod length follow these steps:; Steps 1-5 to remove standard downrod pipe; new; pipe; Downrod

www.CasablancaFanCo.com 1.888.227.2178 7 M6002-01 • 08/08/12 • © Casablanca Fan Company Slid e Slid e 1 2 3 4 5 6 7 8 9 10 Sold S epar at ely Included Longer Downrod for angled ceilings or ceilings 10’ or higher Shorter Downrod for fans installed close to ceiling Standard Downrod for ceilings 8-10’ ...

Page 8 - DO NOT

www.CasablancaFanCo.com 1.888.227.2178 8 M6002-01 • 08/08/12 • © Casablanca Fan Company KEEP! 8” 3/8” CU T & ST R IP (not to scale) Remove the pre-installed setscrew so that the downrod can be inserted. Hand tighten the downrod (at least 4-5 full turns) until it stops. The wires can be cut, but ...

Page 9 - DO NOT PICK THE FAN UP BY THE

www.CasablancaFanCo.com 1.888.227.2178 9 M6002-01 • 08/08/12 • © Casablanca Fan Company Downrod (continued) 1.888.227.2178 9 www.CasablancaFanCo.com DO NOT PICK THE FAN UP BY THE CANOPY OR WIRES. Place the downrod ball into the slot in the ceiling bracket. Put the wires and downrod through the canop...

Page 10 - Wiring; M CE; IN; F R O M

www.CasablancaFanCo.com 1.888.227.2178 10 M6002-01 • 08/08/12 • © Casablanca Fan Company Wiring F RO M CE I L I N G BRA C KE T F R OM FA N F R O M CEIL IN G F RO M CEILI N G gr een/y ellow stripe (grounding) gr een/y ellow stripe green/yellow stripe Note: To connect the wires, hold the bare metal le...

Page 11 - Canopy; Screw

www.CasablancaFanCo.com 1.888.227.2178 11 M6002-01 • 08/08/12 • © Casablanca Fan Company Canopy Lift the canopy into place so that the screw holes are aligned. Position the canopy so that, when lifted into place, the canopy fits into the hanging bracket as shown. Screw Holes Insert the two canopy sc...

Page 12 - Blades

www.CasablancaFanCo.com 1.888.227.2178 12 M6002-01 • 08/08/12 • © Casablanca Fan Company Blades Your blades are shielded with Dust Armor® which is a nanotechnology coating that repels dust. For cleaning the fan, use soft brushes or cloths to prevent scratching. Cleaning agents may damage the finishe...

Page 13 - Switch Housing

www.CasablancaFanCo.com 1.888.227.2178 13 M6002-01 • 08/08/12 • © Casablanca Fan Company Switch Housing Feed the wire plug through the center hole of the upper switch housing, then wrap keyhole slots around the screws and twist counterclockwise. Screw two (2) housing assembly screws from the hardwar...

Page 15 - Maintenance & Cleaning; In warm weather; ON

www.CasablancaFanCo.com 1.888.227.2178 15 M6002-01 • 08/08/12 • © Casablanca Fan Company Switch Housing (continued) Maintenance & Cleaning CONGRATULATIONS! YOU’RE DONE! The pull chain controls the fan: high, medium, low, extra low, and off. To switch the direction of air flow, move the reverse s...

Page 16 - Troubleshooting; Excessive wobbling; AUTHORIZED SERVICE CENTERS; For the most updated listing of Casablanca Authorized

www.CasablancaFanCo.com 1.888.227.2178 16 M6002-01 • 08/08/12 • © Casablanca Fan Company Troubleshooting Excessive wobbling • Tighten all of the blade and blade iron screws until they are snug. • Turn the power off, suppor t the fan carefully, and check that the hanger ball is properly seated. • Use...