Casablanca 46XXD/M - Manuals

Page 2 - Calculation of 32; SLOPED CEILING INSTALLATIONS; Pole Length

2 Calculation of 32 ° Use the tear-off Ceiling Angle Template card inserted in the back of this manual, it provides you with a simple ‘go’ or‘no-go’ for installing your fan on a sloped ceiling. SLOPED CEILING INSTALLATIONS MOUNTING RECOMMENDATIONS 7 ′ MINIMUM Pole Length StandardStandard 6 ″ 12 ″ 12...

Page 3 - Installing a New Ceiling Fixture Outlet Box; PERMA•LOCKTM HARDWARE; APISTRANO; IMPORTANT SAFETY INFORMATION!

3 PREPARATION INSTRUCTIONS Unpacking: Before assembling and installing your ceiling fan, remove all parts from the shipping cartons and check themagainst the parts listed here. Before discarding packaging material, be certain that all parts have been removed. CEILING HARDWARE CROSSBAR MOUNTING BRACK...

Page 5 - CANOPY HATCH INSTALLATION; Fan Hanging Weight

55 CANOPY ELECTRICAL CONNECTIONS Step 4a. Attach the fan wires to the ceiling fixture outlet box wiring by placing the bare ends of the wires side by side and then securing with a wire nut. Test that the connection is secure by pulling on the wire nut. Connect in this order: Step 4b. • GREEN leads f...

Page 6 - BLADE & BLADE HOLDER HARDWARE; RUBBER GROMMET INSTALLATION; CORRECT INSTALLATION; INSTALLING THE BLADE/BLADE HOLDER TO FAN MOTOR

6 RUBBER GROMMET (4 PER BLADE) BLADE SCREW (4 PER BLADE) BLADE & BLADE HOLDER HARDWARE BLADE HOLDER BLADE HOLDER SCREW (2 PER BLADE) Step 9. Insert a rubber grommet through each blade hole of every blade. Inspectboth sides of the blade to assure thatthe lips of the grommet are fully engaged. RUB...

Page 7 - BLADE/BLADE HOLDER INSTALLATION; BLADE INSTALLATION; REMOVE SHIPPING BLOCKS

7 BLADE/BLADE HOLDER INSTALLATION Step 12. Using the five screws removed in Step 11, and the five additional screws fromthe pack, attach each blade/blade holder as-sembly to the motor. Using the screwdriver, tighten securely by hand only. Step 10. Attach each blade to a blade holder securing it with...

Page 8 - COMPLETING INSTALLATION; PREPARATION; INSTALL SWITCH HOUSING MOUNTING SCREWS; VERSA•TOUCH 2

8 COMPLETING INSTALLATION Step 14. If your fan is a Versa•Touch 2 model, please skip to Step 15. For 3-Speed models, hold the switch hous-ing up to the fan and connect the motorplug to the switch housing socket. Theconnector is keyed to ensure correct in-stallation. PREPARATION (3-SPEED ONLY) CONNEC...

Page 9 - INSTALLING THE SWITCH HOUSING ASSEMBLY; INSTALLING THE SWITCH HOUSING CAP

9 INSTALLING THE SWITCH HOUSING ASSEMBLY Step 18. Line up the two clearance holes in the cap with the two threaded holeson the raised rim of the switch housing.Press the cap onto the switch housing toseat the guide pins into the alignmentholes of the switch housing. Step 19. Using the two (2) 8-32 X...

Page 11 - W-40 WALL CONTROL OF THE FAN

11 3-SPEED ♦ W-80 WALL CONTROL OF THE FAN & LIGHT(S) 3-SPEED ♦ W-40 WALL CONTROL OF THE FAN • The fan may be turned ON and OFF by the W-80 wall control. • The lights may be turned ON and OFF by the W-80 and the inten-sity adjusted from low to high. • The fan must be supplied with two i nde p e n...

Page 12 - TROUBLESHOOTING; PROBLEM; PERFORMANCE AND ENERGY INFORMATION

12 TROUBLESHOOTING Before Requesting Service: Please follow this troubleshooting guide before contacting your dealer for assistance. Caring for Finishes : For cleaning, a soft brush or lint-free cloth should be used to prevent scratching the finish. A vacuum cleanerbrush nozzle can remove heavier du...

Page 15 - For questions or to locate the nearest

15 Before Requesting Service: Please follow this troubleshooting guide before contacting your dealer for assistance. PROBLEM POSSIBLE REMEDIES PROBLEM POSSIBLE REMEDIES .. FAN WILL NOT START •Check main circuit fuses, circuit breakers, or wall switch position. Check all wire connections, making sure...

Page 16 - PRODUCT SPECIFICATIONS

16 PRODUCT SPECIFICATIONS Model Name: Capistrano ® Model Number: 46XXD/M and 46UXXD/M Dimensions: A = 11.1" B = 12.75" C = 3" D = 12.6" E = 5.6" Weight: 21 lbs. Motor: 188mm x 20mm Direct Drive ™ Blade Span With: 45" or 53" Blade Pitch: 16° No. of Blades: 5 Technology: 3-...