Casablanca 41UxxD - Manuals

Page 2 - MOUNTING RECOMMENDATIONS

2 Calculation of 32 ° Use the tear-off Ceiling Angle Template card inserted in the back of this manual, it provides you with a simple ‘go’ or‘no-go’ for installing your fan on a sloped ceiling. 7 ′ MINIMUM When to Use Extension Poles For best performance and best appearance,an extension pole should ...

Page 3 - AILEA; IMPORTANT SAFETY INFORMATION!

3 PREPARATION INSTRUCTIONS Unpacking: Before assembling and installing your ceiling fan, remove all parts from the shipping cartons and check themagainst the parts listed here. Before discarding packaging material, be certain that all parts have been removed. FAN PREPARATION PERMA•LOCK™ HARDWARE W A...

Page 4 - CROSSBAR MOUNTING BRACKET INSTALLATION; CANOPY HARDWARE; CEILING HARDWARE

4 CAUTION: To reduce the risk of personal injury, use only the mounting hardware provided with the approved outlet box to install the crossbar mounting bracket. CROSSBAR MOUNTING BRACKET INSTALLATION CEILING WIRING CROSSBAR MOUNTING BRACKET FLAT WASHER GREEN GROUND WIRE CEILING FAN APPROVED OUTLET B...

Page 5 - CANOPY INSTALLATION

5 HANGING THE FAN Step 3. To hang the fan body in the canopy, hold the fan body firmly and in-sert the ball into the canopy opening.Check that no wires were pinched. Ro-tate the fan body until the slot in theball fits into the pin opposite the canopyopening. CAPPED BLUE D1-OPTION WIRE. PIN SLOT BALL...

Page 6 - CANOPY HATCH INSTALLATION; BLADE TO BLADE HOLDER INSTALLATION

6 CANOPY HATCH INSTALLATION BLADE HOLDER WASHER (3 PER BLADE) BLADE HOLDER SCREW (3 PER BLADE) BLADE HOLDER BLADE HOLDER SCREW (2 PER BLADE) Step 6. Tuck the wires into the canopy with the wire nuts pointed upwards, sothat the WHITE and BLACK wires are onopposite sides of the canopy and all wiresare...

Page 7 - REMOVE SHIPPING BLOCKS; REMOVE SWITCH HOUSING CAP SCREWS

7 Step 11. Install the assembled blade and blade holder to the fan motor. Use the bladeholder screws provided. Using the screwdriver, tighten securely by hand only. Step 10. On the motor remove the five shipping blocks by unscrewing the screws. Discard the five shipping blocks andscrews. SHIPPING BL...

Page 8 - INSTALL SWITCH HOUSING; CONNECT WIRES; INSTALL SWITCH HOUSING CAP SCREWS

8 Step 15. Install 2 of the 3 switch housing screws onto the fan adapter plate, leaving 1 ⁄ 8 " threads visible. Feed the wire connec- tor from the fan through the center of theswitch housing. Align the 2 screws on the adapter plate withthe keyhole slots of the switch housing.Raise the switch ho...

Page 9 - OPERATION; OPTIONAL LIGHT FIXTURE INSTALLATION; TROUBLESHOOTING

9 3-SPEED ♦ OPERATION FAN WILL NOT START Check main circuit fuses, circuit breakers, or wall switch position. Check all wire connections, making sure the power is turned off during this inspection. Check that reverse switch is not set in center of throw. FAN WOBBLES OR SHAKES Be sure canopy pin is p...

Page 10 - Product SPecificationS

Product SPecificationS Model name: Wailea ® Model number: 41UxxD dimensions: A = 11.34" B = 11.93" C = 3" D = 8.5" E = 5.6" Weight: 17 lbs. Motor: 153mm x 20mm Direct Drive ™ Blade Span With: 31" Blade Pitch: 25° no. of Blades: 6 technology: 3-Speed Airflow: 3,127 cfm electri...