Carrier TB-NHP- Manuals

2 MUST have both the R and C terminals connected to operateproperly. This thermostat uses a green LED to indicate auxiliary heat and emergency heat operation. INSTALLATION Step 1 — Thermostat Location Thermostat should be mounted: S Approximately 5 ft (1.5m) from floor. S Close to or in a frequently...

4 WIRING DIAGRAMS A06566 Fig. 1 -- A/C Thermostat Typical Installation A06567 Fig. 2 -- HP Thermostat Typical Installation Copyright 2010 Carrier Corp. S 7310 W. Morris St. S Indianapolis, IN 46231 Printed in U.S.A. Edition Date: 02/10 Manufacturer reserves the right to change, at any time, specific...

TB --- NAC TB --- NHP Base Series Non --- Programmable Thermostat Homeowner’s Guide Designed and Assembled in the USA. A07108 Base Non --- Programmable Thermostat 1. To Select the Mode: Use the H/C button to move between the choices. OFF, HEAT, COOL, or EMHT will appear on the display. EMHTwill only...

2 S Close to or in direct airflow from supply registers andreturn--air grilles. S In areas with poor air circulation, such as behind a dooror in an alcove. Step 2 — Install Thermostat ELECTRICAL SHOCK HAZARD Failure to follow this warning could result in personal injury or death.Before installing th...

3 Option 10 — O (reversing valve) On with Heat or Cool Selection This selection is only available on heat pump model thermostats. This selection determines whether the reversing valve is energizedin the heating or cooling mode. Factory default is C. Available Selection: Use UP and DOWN buttons to ch...

4 WIRING DIAGRAMS A06566 Fig. 1 -- A/C Thermostat Typical Installation A06567 Fig. 2 -- HP Thermostat Typical Installation Copyright 2007 Carrier Corp. S 7310 W. Morris St. S Indianapolis, IN 46231 Printed in U.S.A. Edition Date: 02/07 Manufacturer reserves the right to change, at any time, specific...