Carrier INFINITY 2420- Manuals

Page 2 - APPLICATION CONSIDERATIONS; HIGH VOLTAGE HAZARD; NOTE; WARNING; ELECTRICAL OPERATION HAZARD; WARNING; KIT MODEL NUMBER

2 APPLICATION CONSIDERATIONS HIGH VOLTAGE HAZARD Failure to follow this warning could result in personal injury or death.This Air Purifier utilizes high voltage. If you notice water running into or around the Air Purifier, water stains on the purifier cartridge or on the Enhancement Module walls or ...

Page 3 - INSTALLATION; Check Air Purifier Components; CAUTION; Identify Mounting Location

3 INSTALLATION Check Air Purifier Components CUT HAZARD Failure to follow this caution may result in personal injury.Sheet metal parts may have sharp edges or burrs. Use care and wear appropriate protective clothing and gloves when handling parts. CAUTION ! Carefully remove all items from the box. S...

Page 5 - Top Mount; Side Mount; Mount Cabinet; ELECTRICAL SHOCK HAZARD; UNIT DAMAGE HAZARD

5 Return Duct Top Mount Bottom Mount Return Duct Side Mount A11368 Fig. 5 -- Mounting Air Purifier Cabinet Mount Cabinet ELECTRICAL SHOCK HAZARD Failure to follow this warning could result in personal injury or death.Before installing or servicing system, always turn off main power to system. There ...

Page 7 - compartments; EQUIPMENT DAMAGE HAZARD; For mounting on furnaces:

7 WiringFor the wiring in the furnace and fan coil wiring compartments The incoming power supply wiring and connections for the airpurifier should be routed away from the output duct of the furnace or fan coil unit, and the incoming power connections for the air purifier in the furnace or fan coil u...

Page 9 - Final Assembly; Checking Air Purifier Operation; CARBON MONOXIDE HAZARD

9 START--UP AND OPERATION Final Assembly 1. Install the Filter Enhancement Module (FEM) into the cab- inet, insuring that FEM is held firmly in place by the reten-tion springs and that the high voltage connector/handle is facing outward. See Fig. 15. Airflow A11495 Fig. 15 -- Installing FEM 2. Apply...

Page 10 - MAINTENANCE; To replace the Air Purifier cartridge, complete the; Turn the heating and cooling system power off.; PURIFIER MODEL; Turn heating and cooling system power off.

10 Green PowerIndicator A11369 Fig. 19 -- Power Indicator (Green LED) 5. This green indicator light will illuminate when the Air Puri- fier door is installed, the power switch is in the ON positionAND the furnace blower is running. If a flow sensor (model KIT--160--000) is installed in the Air Purif...

Page 11 - TROUBLESHOOTING

11 1. Turn the Air Purifier switch to the off position.2. Remove the Air Purifier door.3. Slide out the Filter Enhancement Module (FEM).4. Clean the FEM. CUT HAZARD Failure to follow this warning could result in personal injury.Sheet metal parts may have sharp edges or burrs. Use care and wear appro...

Page 12 - ERROR AND STATUS CODES; The error codes and status codes are shown in the following tables.; INDICATOR LIGHT CODE

12 ERROR AND STATUS CODES The error codes and status codes are shown in the following tables. NOTE : The green indicator light on door cover shown in Fig. 19, Power Indication (Green LED). Table 1 – Operating Status Codes INDICATOR LIGHT CODE EXPLANATION POSSIBLE CAUSE RECOMMENDED ACTION OFF No inco...

Page 13 - the power switch needs to be turned on and off for three cycles.; : By resetting the air purifier controls the issue with air

13 Table 2 – Start--Up Error Codes INDICATOR LIGHT CODE EXPLANATION POSSIBLE CAUSE RECOMMENDED ACTION 2 FLASHES Filter ground circuit fault No filter installed Place filter in air purifier. Filter installed incorrectly. Install filter in correct orientation as indicated by airflow direction arrows o...

Carrier INFINITY 2420- Manuals

Manuals:

User Manual Carrier INFINITY 2420

Summary

Carrier Manuals