Carrier Aquasnap 30RAP060- Manuals

2 5. Using the no. 6 screw provided and the existing retaining clips in the control box, mount the EMM module to the back of the control box. See Fig. 2-8 for the mounting lo- cation of each unit. 6. The board address is set through a 4-position DIP switch. All switches should be set to ON. CEBD4303...

5 Install Harness and Make Wire Connections 38AP025-060 UNITS WITH AUX BOARD — Perform the following procedure to install the harness and make the wiring connections. See Fig. 9 for wiring. 1. Disconnect the MBB-J3 connector and plug it into the EMM-J3 connector. 2. Install the new harness 38APHLSBC...

6 30RAP010-060 UNITS WITHOUT AUX BOARD — Per- form the following procedure to install the harness and make the wiring connections. See Fig. 11 for wiring. 1. Install the new harness 38APHSCALECA00. Install plug labeled EXV-J4 to EXV-J4 and other end labeled EMM-J3 to EMM-J3. 2. Install the new harne...