Page 2 - FIRE, EXPLOSION HAZARD; FIRE, EXPLOSION HAZARD; TO LIGHT UNIT; COMFORT; LINK; FIRE, EXPLOSION HAZARD; DANGER
2 TO LIGHT UNIT (UNITS WITH THERMOSTAT CONTROL) FIRE, EXPLOSION HAZARD Failure to follow this warning could result in personal injury or death.1. Do not turn off the electrical power to unit without first turning off the gas supply. 2. Before attempting to start the gas heating section, familiarize ...
Page 3 - ON; MAIN
3 LOCK-OUT TAG ON OFF MAIN STEP 1 STEP 2 STEP 3 STEP 4 STEP 5 STEP 6 STEP 7 STEP 8 STEP 9 STEP 10 OFF ON CONTROL I.D.LABEL 1/4˝ X .032˝ MALE SPADETERMINALS (2) COMMON SWITCH (SHIPPED IN“ON” POSITION) OFF ON CONTROL I.D.LABEL 1/4˝ X .032˝ MALE SPADETERMINALS (2) COMMON SWITCH (SHIPPED IN“ON” POSITION...
Page 4 - ENTER; ESCAPE; ESCAPE; Link
4 LOCK-OUT TAG ON OFF MAIN STEP 1 STEP 2 STEP 3 STEP 4 STEP 5 STEP 6 STEP 7 STEP 8 STEP 9 STEP 10 Run Status Service Test Temperature Pressures Setpoints Inputs Outputs Configuration Time Clock Operating Modes Alarms Alarm Status ENTER MODE ESCAPE Run Status Service Test Temperature Pressures Setpoi...
Page 5 - TO LIGHT UNIT (UNITS WITH; FIRE HAZARD; FIRE HAZARD
5 TO LIGHT UNIT (UNITS WITH COMFORT LINK ™ CONTROL) (CONTINUED) See Fig. 1 for location of gas valve. Refer to Fig. 3 while proceeding with the following steps. Step 1 — Turn off the unit demand for cooling or heating by using the Scrolling Marquee. The Scrolling Marquee is located inthe control box...
Page 7 - MAINTAINING YOUR UNIT
7 LOCK-OUT TAG ON OFF MAIN STEP 1 STEP 2 STEP 3 STEP 4 STEP 5 STEP 6 STEP 7 Run Status Service Test Temperature Pressures Setpoints Inputs Outputs Configuration Time Clock Operating Modes Alarms Alarm Status ENTER MODE ESCAPE C07351 Fig. 5 -- To Shut Unit Off (Units with Comfort Link t Control) If u...
Page 8 - FIRE AND EQUIPMENT DAMAGE HAZARD; Table 1 – Indoor Air Filter Data; Heat Exchanger
8 ROUTINE MAINTENANCE AND CARE FOR THE EQUIPMENT OWNER Before proceeding with those things you might want to maintain yourself, please carefully consider the following: FIRE, EXPLOSION HAZARD Failure to follow this warning could result in personal injury, death, and/or property damage.1.Turn off gas...
Page 9 - PERSONAL INJURY HAZARD; EQUIPMENT DAMAGE HAZARD; CAUTION; REGULAR DEALER MAINTENANCE
9 Fan Shaft Bearings Lubrication should only be done by qualified service personnel.Contact your dealer for the required annual maintenance. Evaporator and Condenser Coils Cleaning of the coils should only be done by qualified service personnel. This procedure should be performed prior to coolingope...
Page 10 - If insufficient heating or cooling is suspected:; NOTE; IN CASE OF TROUBLE
10 10. Inspection of all electrical wiring and components to assure proper connection. 11. Inspection for leaks in the refrigerant circuit. Pressure--check to determine appropriate refrigerant charge 12. Operational check of the unit to determine working conditions. Repair or adjustment should be ma...