Carrier 48/50A020-060- Manuals

Carrier 48/50A020-060– User Manual, Manual in PDF format online.

Manuals:

User Manual Carrier 48/50A020-060

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8

Summary

Page 2 - Table 1 — Accessory Package Contents — Return; Return Air Smoke Detector Installation; Fig. 1 — Smoke Detector; Fig. 2 — Smoke Detector Mounting Location for

2 INSTALLATION Check Package Contents — Remove accessory pack- aging and inspect shipment for damage. If any damage isfound, file a claim with the shipping agent immediately. If anyitem is missing or any part does not assemble properly, notifyyour Carrier distributor. Table 1 lists the accessory pac...

Page 3 - Fig. 3 — Smoke Detector Wiring Connections

3 8. Insert tube end plug into sampling tube and slide sam- pling tube into bottom hole of smoke detector. 9. Remove the unit side panel at the return end of the unit (downshot units only). Save screws for use later. 10. Mount the sampling tube support bracket to the cross member with two 1 / 4 AB-1...

Page 5 - Comfort

5 11. Slide sampling tube into bracket, making sure the sampling holes point in the opposite direction of thereturn airflow. Insert the sampling tube all the way intothe smoke detector. 12. Secure sampling tube to smoke detector with two no. 6 self-tapping screws. 13. Attach smoke detector to the br...

Manual Carrier 48/50A020-060

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8

Summary

Page 2 - Table 1 — Accessory Package Contents — Return; Return Air Smoke Detector Installation; Fig. 1 — Smoke Detector; Fig. 2 — Smoke Detector Mounting Location for

2 INSTALLATION Check Package Contents — Remove accessory pack- aging and inspect shipment for damage. If any damage isfound, file a claim with the shipping agent immediately. If anyitem is missing or any part does not assemble properly, notifyyour Carrier distributor. Table 1 lists the accessory pac...

Page 3 - Fig. 3 — Smoke Detector Wiring Connections

3 8. Insert tube end plug into sampling tube and slide sam- pling tube into bottom hole of smoke detector. 9. Remove the unit side panel at the return end of the unit (downshot units only). Save screws for use later. 10. Mount the sampling tube support bracket to the cross member with two 1 / 4 AB-1...

Page 5 - Comfort

5 11. Slide sampling tube into bracket, making sure the sampling holes point in the opposite direction of thereturn airflow. Insert the sampling tube all the way intothe smoke detector. 12. Secure sampling tube to smoke detector with two no. 6 self-tapping screws. 13. Attach smoke detector to the br...

Carrier Manuals