Carrier 38HD- Manuals

________ I ARRANGEMENT A-(COOLING ONLY) ARRANGEMENT B-ONE TRANSFORMER (COOLING AND ONE-STAGE HEATING) ARRANGEMENT C-ONE TRANSFORMER (COOLING AND TWO-STAGE HEATING) *IFR and IFM are located in furnace on heating-cooling applica­ tions If accessory IFR is required for cooling-only applications, locate...

Table 3 — Electrical Data (60 Hz) OUTDOOR UNIT 38HD V/PH OPER VOLTS* COMPR FAN FLA MCA MAX FUSE OR HACR TYPE CKT BKR AMPS Max Min LRA RLA 018024030 036048060 208/230-1 254 187 52 0 60.0 65 0 82 0 127 0 135 0 84 10.6 13.5 165 25 0 30.7 .70 70 70 1 45 1 45 1.45 120 140 180 22 0 33 0 40 0 15 2030 35506...

Charge System — Release holding charge into sys­ tem by opening (backseating) liquid and suction line service valves. Add charge amount as required for the total system. See Table 1. For indoor sections not in­ cluded in Table 1, see Refrigerant Charging. To Start Unit — Assuring that crankcase heat...

field repaired, therefore only a complete valve or valve stem and service port caps are available for replacement. AccuRater® (Bypass Type) Servicing — See Fig. 4 for bypass type AccuRater components. The piston has a refrigerant metering hole through it. The retainer forms a stop for the piston in ...

Tl T2 3 SEC h OPERATING TIME 5MIN- BLK DENOTES CLOSED CONTACTS Fig. 9 — Time Guard II Sequence Chart COMPRESSOR LOCKOUT <D Q <1>-BLU- (p d l-BRN BRN—(COMMON TO THERMOSTAT Fig. 10 — Wiring Diagram See Fig. 10. Wire the device in series between the compressor lockout (CLO) and the unit thermo...