Carrier 38CMC- Manuals

Step 3—Clearance Requirements When installing, allow sufficient space for airflow clearance,wiring, refrigerant piping, and service. Common clearances are 6in. on 1 side, 12 in. on 2 sides, and 30 in. on service side of unit.Allow 24 in. between units. Discharge air must be unobstructedand must not ...

4. After wrapping service valve with a wet cloth, tubing set can be brazed to service valve using either silver bearing ornon-silver bearing brazing material. 5. Refrigerant tubing and indoor coil are now read for leak testing. This check should include all field and factory joints. MECHANICAL CONNE...

Wiring must comply with local codes and NEC requirements,if a field-supplied control power source is needed whenadding solenoid. 1. Remove coil liquid connection cap and discard. 2. Mount solenoid valve on liquid tube, making sure valve flow arrow points toward indoor coil. Mount valve in any positi...