Carrier 38AKS009 - Manuals

Carrier 38AKS009 – Manual in PDF format online.

Manuals:

Manual Carrier 38AKS009

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16

Summary

Page 4 - Table 2 — Weight Distribution; Step 2 — Rig and Mount the Unit; If it is necessary to roll unit into position, mount unit on; Table 3A — Refrigerant Piping Sizes — 60 Hz; Be sure unit panels are securely in place prior to rigging.

4 CONSIDER SYSTEM REQUIREMENTS• Consult local building codes and NEC for special instal-lation requirements. • Allow sufficient space for airflow clearance, wiring,refrigerant piping, and unit servicing. See Fig. 2. • Locate unit so that condenser airflow is unrestricted onall sides and above. Refer...

Page 5 - Fig. 3 — Rigging Label

5 UNIT 38 DIM. A DIM. B DIM. C DIM. D DIM. E DIM. F AK007 1 ′ -6 1 / 2 ″ [470.0] 1 ′ -2 3 / 4 ″ [375.0] —— 1 ′ -2 1 / 4 ″ [362] 1 ′ -4 5 / 16 ″ [415] 2 ′ -9 5 / 16 ″ [846.5] AK008 1 ′ -8 ″ [508.0] 1 ′ -6 1 / 2 ″ [470.0] —— 1 ′ -3 ″ [381] 2 ′ - 5 / 16 ″ [613] 3 ′ -5 7 / 16 ″ [1052.5] AK012 1 ′ -9 ″ [...

Page 6 - Step 4 — Make Electrical Connections; Fig. 4 — Typical Compressor Mounting; Fig. 5 — Power Wiring Connections

6 FILTER DRIER AND MOISTURE INDICATOR — The fil-ter drier is factory installed. Moisture indicator is field-suppliedand should be installed just after liquid line shutoff valve. Donot use a receiver; there is none provided with unit and oneshould not be used.NOTE: Unit is shipped with R-22 holding c...

Carrier Manuals