Carrier 30GX080-176- Manuals

Step 2 — Install Piping Shut off all power to the unit, then lock out and safety-tag all disconnects before proceeding with installation. Remove refrigerant charge from circuits using an ap-proved refrigerant recovery device before proceeding withinstallation. NOTE: The units have 2 circuits. Perfor...

Step 4 — Install Control Wiring Be sure all power to the unit is off before proceeding.Lock out and safety-tag all disconnects. Wires between field-installed components and unit control box must be enclosed in field-supplied conduit. Follow alllocal codes and NEC (National Electrical Code, U.S.A.). ...

30GX080-176 30HX076-271 LEGEND MLC — Minimum Load ControlTB — Terminal Block NOTE: See Fig. 3 for locations of junctionboxes on unit. Fig. 4 — Minimum Load Control Wiring 5

Step 2 — Install Piping Shut off all power to the unit, then lock out and safety-tag all disconnects before proceeding with installation. Remove refrigerant charge from circuits using an ap-proved refrigerant recovery device before proceeding withinstallation. NOTE: The units have 2 circuits. Perfor...

Step 4 — Install Control Wiring Be sure all power to the unit is off before proceeding.Lock out and safety-tag all disconnects. Wires between field-installed components and unit control box must be enclosed in field-supplied conduit. Follow alllocal codes and NEC (National Electrical Code, U.S.A.). ...

30GX080-176 30HX076-271 LEGEND MLC — Minimum Load ControlTB — Terminal Block NOTE: See Fig. 3 for locations of junctionboxes on unit. Fig. 4 — Minimum Load Control Wiring 5