Cadillac 2007 STS-V - Manuals

Front Seats ..................................................... 9 Power Seats ................................................. 9Power Lumbar .............................................. 9Heated Seats .............................................. 10Heated and Ventilated Seats .....................

Front Seats Power Seats The power seatcontrols are locatedon the outboard sideof the seats. To adjust the seat, do any of the following: • Move the seat forward or rearward by slidingthe horizontal control forward or rearward. • Raise or lower the front part of the seatcushion by moving the front of...

To raise the position of the lumbar support, pressand hold the top of the control. To lower theposition of lumbar support, press and hold thebottom of the control. Let go of the control whenthe lower seatback reaches the desired levelof support. Your vehicle may have a memory function whichallows se...

Heated and Ventilated Seats Your vehicle may haveheated and ventilatedfront seats. The buttonsare located on theclimate control panel. z (Heated Seat and Seatback): This part of the button is for the heated seat and seatback. { (Ventilated Seat): This part of the button is for the ventilated seat. T...

Head Restraints Adjust the head restraint so that the top of therestraint is at the same height as the top ofthe occupant’s head. This position reduces thechance of a neck injury in a crash. Pull the head restraintup to raise it. To lowerthe head restraint,press the button,located on the top of thes...

Rear Seats Heated Seats Your vehicle may have this feature. The buttonsused to control the heated rear seats arelocated on the back of the center console.The engine must be running for the heatedseat feature to work. z (Heated Seat and Seatback): Press this button to turn the heated seat feature on....

Safety Belts Safety Belts: They Are for Everyone This part of the manual tells you how to usesafety belts properly. It also tells you some thingsyou should not do with safety belts. { CAUTION: Do not let anyone ride where he or shecannot wear a safety belt properly. If youare in a crash and you are ...

In most states and in all Canadian provinces,the law says to wear safety belts. Here iswhy: They work . You never know if you will be in a crash. If you dohave a crash, you do not know if it will be abad one. A few crashes are mild, and some crashes can beso serious that even buckled up, a personwou...

Q: If I am a good driver, and I never drive farfrom home, why should I wear safety belts? A: You may be an excellent driver, but if you arein an accident — even one that is not yourfault — you and your passengers can be hurt.Being a good driver does not protect you fromthings beyond your control, su...

Driver Position Lap-Shoulder Belt The driver has a lap-shoulder belt. Here is howto wear it properly. 1. Close and lock the door. 2. Adjust the seat so you can sit up straight. To see how, see “Seats” in the Index. 3. Pick up the latch plate and pull the belt across you. Do not let it get twisted. T...

Q: What is wrong with this? A: The shoulder belt is too loose. It will not givenearly as much protection this way. { CAUTION: You can be seriously hurt if your shoulderbelt is too loose. In a crash, you wouldmove forward too much, which couldincrease injury. The shoulder belt shouldfit against your ...

Q: What is wrong with this? A: The belt is buckled in the wrong place. { CAUTION: You can be seriously injured if your belt isbuckled in the wrong place like this. In acrash, the belt would go up over yourabdomen. The belt forces would be there,not at the pelvic bones. This could causeserious intern...

Q: What is wrong with this? A: The belt is twisted across the body. { CAUTION: You can be seriously injured by a twistedbelt. In a crash, you would not have thefull width of the belt to spread impactforces. If a belt is twisted, make it straightso it can work properly, or ask your dealerto fix it. 2...

To unlatch the belt, just push the button on thebuckle. When the safety belt is unbuckled or whenthe vehicle is turned off, the tension reducer willdeactivate. The belt should go back out of the way. Before you close the door, be sure the belt isout of the way. If you slam the door on it, you candam...

Safety Belt Use During Pregnancy Safety belts work for everyone, including pregnantwomen. Like all occupants, they are more likelyto be seriously injured if they do not wearsafety belts. A pregnant woman should wear a lap-shoulderbelt, and the lap portion should be worn as low aspossible, below the ...

Rear Seat Passengers It is very important for rear seat passengers tobuckle up! Accident statistics show that unbeltedpeople in the rear seat are hurt more often incrashes than those who are wearing safety belts. Rear passengers who are not safety beltedcan be thrown out of the vehicle in a crash. A...

To unlatch the belt, push the button on the buckle. Rear Safety Belt Comfort Guides Rear shoulder belt comfort guides may provideadded safety belt comfort for older childrenwho have outgrown booster seats and for someadults. When installed on a shoulder belt, thecomfort guide positions the belt away...

Safety Belt Pretensioners Your vehicle has safety belt pretensioners for thedriver and right front passenger. Although youcannot see them, they are part of the safety beltassembly. They help tighten the safety belts duringthe early stages of a moderate to severe frontaland near frontal crash if the ...

Child Restraints Older Children Older children who have outgrown booster seatsshould wear the vehicle’s safety belts. Q: What is the proper way to wear safety belts? A: An older child should wear a lap-shoulder beltand get the additional restraint a shoulder beltcan provide. The shoulder belt should...

{ CAUTION: Never do this.Here a child is sitting in a seat that has alap-shoulder belt, but the shoulder part isbehind the child. If the child wears the beltin this way, in a crash the child might slideunder the belt. The belt’s force would thenbe applied right on the child’s abdomen.That could caus...

Child Restraint Systems An infant car bed (A), a special bed made for usein a motor vehicle, is an infant restraint systemdesigned to restrain or position a child on acontinuous flat surface. Make sure that the infant’shead rests toward the center of the vehicle. A rear-facing infant seat (B) provid...

Q: How Should I Use a Child Restraint? A: A child restraint system is any device designedfor use in a motor vehicle to restrain, seat, orposition children. A built-in child restraintsystem is a permanent part of the motorvehicle. An add-on child restraint system is aportable one, which is purchased ...

Because there are different systems, it is importantto refer to the instructions that come with therestraint. A child can be endangered in a crash ifthe child is not properly secured in the childrestraint. Where to Put the Restraint Accident statistics show that children are safer ifthey are restrai...

{ CAUTION: Children can be seriously injured orstrangled if a shoulder belt is wrappedaround their neck and the safety beltcontinues to tighten. Secure any unusedsafety belts behind the child restraint sochildren cannot reach them. Pull theshoulder belt all the way out of theretractor to set the loc...

Airbag System Your vehicle has six airbags: • A frontal airbag for the driver and anotherfrontal airbag for the right front passenger. • A seat-mounted side impact airbag for thedriver and another for the right frontpassenger. • A roof-mounted side impact airbag for thedriver and passenger directly ...

{ CAUTION: Anyone who is up against, or very close to,any airbag when it inflates can be seriouslyinjured or killed. Airbags plus lap-shoulderbelts offer the best protection for adults,but not for young children and infants.Neither the vehicle’s safety belt system norits airbag system is designed fo...

When Should an Airbag Inflate? The driver’s and right front passenger’s frontalairbags are designed to inflate in moderate tosevere frontal or near-frontal crashes. But they aredesigned to inflate only if the impact exceeds apredetermined deployment threshold. Deploymentthresholds take into account ...

Frontal airbags (driver and right front passenger)are not intended to inflate during vehiclerollovers, rear impacts, or in many side impacts. Side impact airbags are intended to inflate inmoderate to severe side crashes. A side impactairbag will inflate if the crash severity is above thesystem’s des...

How Does an Airbag Restrain? In moderate to severe frontal or near frontalcollisions, even belted occupants can contact thesteering wheel or the instrument panel. Inmoderate to severe side collisions, even beltedoccupants can contact the inside of the vehicle.Airbags supplement the protection provid...

Passenger Sensing System Your vehicle has a passenger sensing system forthe right front passenger position. The passengerairbag status indicator will be visible when thevehicle is running. The words ON and OFF or the symbol for on andoff, will be visible in the overhead consoleduring the system chec...

If a child restraint has been installed and the onindicator is lit, turn the vehicle off. Removethe child restraint from the vehicle and reinstall thechild restraint following the child restraintmanufacturer’s directions and refer to Securing a Child Restraint in the Right Front Seat Positionon page...

{ CAUTION: If the airbag readiness light in theinstrument panel cluster ever comes onand stays on, it means that something maybe wrong with the airbag system. CAUTION: (Continued) CAUTION: (Continued) If this ever happens, have the vehicleserviced promptly, because an adult-sizeperson sitting in the...

Restraint System Check Checking the Restraint Systems Now and then, make sure the safety belt reminderlight and all your belts, buckles, latch plates,retractors and anchorages are working properly.Look for any other loose or damaged safetybelt system parts. If you see anything that mightkeep a safet...

Keys .............................................................. 85 Keyless Access System .............................. 87Keyless Access System Operation .............. 88 Doors and Locks .......................................... 98 Door Locks ................................................. 9...

Universal Home Remote System ................ 135 Universal Home Remote System (With Three Round LED) ....................... 135 Universal Home Remote System (With One Triangular LED) ..................... 136 Universal Home Remote System Operation (With Three Round LED) ....... 137 Universal Home ...

Keys { CAUTION: Leaving children in a vehicle with thekeyless access transmitter is dangerousfor many reasons, children or otherscould be badly injured or even killed. Theycould operate the power windows or othercontrols or even make the vehicle move.The windows will function with thekeyless access ...

Keyless Access System Your vehicle has a Keyless Access System thatoperates on a radio frequency subject to FederalCommunications Commission (FCC) Rulesand with Industry Canada. This device complies with Part 15 of the FCCRules. Operation is subject to the followingtwo conditions: 1. This device may...

Keyless Access System Operation Your vehicle has a Keyless Access Systemthat lets you lock and unlock your vehicle’s doors,open the trunk lid, remotely start the engine,and locate your vehicle, or sound your vehicle’salarm from a distance as much as 30 feet(10 m) away. The Keyless Access System also...

Battery Replacement Under normal use, the battery in your keylessaccess transmitter should last about three years. The battery is weak if the transmitter will notwork at the normal range in any location. If youhave to get close to your vehicle before thetransmitter works, it is probably time to chan...

To replace the battery, do the following: 1. Depending on which keyless access transmitter you have, Insert a flat object with athin edge into the slot on the side or backof the transmitter and separate the bottom halffrom the top half. 2. Carefully pull the battery out of the transmitter. 3. Put th...

Doors and Locks Door Locks { CAUTION: Unlocked doors can be dangerous. • Passengers, especially children, caneasily open the doors and fall out ofa moving vehicle. When a door islocked, the handle will not open it.You increase the chance of beingthrown out of the vehicle in a crashif the doors are n...

From the inside, use the power door lock switcheslocated on each front door. See Power Door Locks on page 99 for more information. The rear passenger doors have manual door lock knobslocated at the top of the door panel near thewindow. Push down the knob to lock the door.Pull up the knob to unlock t...

Rear Door Security Locks Your vehicle has rear door security locks thatprevent passengers from opening the rear doorson your vehicle from the inside. The rear door securitylocks are located on theinside edge of eachrear door. Youmust open the reardoors to access them. To use these locks, do the foll...

Lockout Protection Your vehicle can be programmed to sound thehorn three times and unlock the driver’s door whenall doors are closed and there is a keylessaccess transmitter inside the interior of the vehicle.When the driver’s door is reopened, the key inreminder chime will sound continuously. Theve...

Trunk Lid Release There are several ways to release the trunk lid. • V (Trunk Lid Release): Press this button located on the driver’s door. The vehiclemust be in PARK (P) or NEUTRAL (N) andthe valet mode turned off. To disablevalet mode, see Valet Lockout Switch on page 110 . • Press the trunk lid r...

Rear Seat Pass-Through Door This feature allows you to access the trunk withoutopening the trunk lid. If the vehicle ever losespower, the trunk can be accessed and openedthrough this door. To open the door, do the following: 1. Pull the rear seat armrest down. 2. If the door is locked, insert the ke...

Windows { CAUTION: Leaving children, helpless adults, or petsin a vehicle with the windows closed isdangerous. They can be overcome by theextreme heat and suffer permanentinjuries or even death from heat stroke.Never leave a child, a helpless adult, or apet alone in a vehicle, especially with thewin...

Power Windows The power window switches are located on thearmrest near each window. Press the front of theswitch to the first position to open the windowto the desired level. Lift up the front of the switchto the first position to close the window. Your vehicle has Retained Accessory Power(RAP) that...

Window Lockout o (Window Lockout): The rear window lockout button is located on the driver’s door armrestnear the window switches. Press this button todisable the rear window controls. The light on thebutton will illuminate, indicating that the featureis in use. The rear windows can be raised orlowe...

Theft-Deterrent System Your vehicle has a theft-deterrent alarm system. The security light islocated on theinstrument panel cluster. If the ignition is off and a door is open, thesecurity light will flash, reminding you to armthe theft-deterrent system. To arm the system, do one of the following: • ...

If a door, hood, or the trunk is opened withoutthe keyless access transmitter, the horn willsound for 30 seconds and the lamps will flashfor two minutes. The vehicle cannot be startedwithout a keyless access transmitter.The Theft-Deterrent system will not arm if: • The key is used to turn the key cy...

To replace the fuse, see Fuses and Circuit Breakers on page 487 . If the fuse does not need to be replaced, you may need to have your vehicleserviced. To reduce the possibility of theft, always arm theTheft-Deterrent system when leaving your vehicle. Valet Lockout Switch The valet lockout switchis l...

Starting and Operating YourVehicle New Vehicle Break-In Notice: Your vehicle does not need an elaborate break-in. But it will perform better inthe long run if you follow these guidelines: • Do not drive at any one constant speed,fast or slow, for the first 500 miles(805 km). Do not make full-throttl...

Starting the Engine Move the shift lever to PARK (P) or NEUTRAL (N).To restart when you are already moving, useNEUTRAL (N). Notice: Do not try to shift to PARK (P) if your vehicle is moving. If you do, you coulddamage the transmission. Shift to PARK (P)only when your vehicle is stopped. The keyless ...

If the engine does not start after 5-10 seconds,especially in very cold weather (below 0°For − 18°C), it could be flooded with too much gasoline. Try pushing the accelerator pedal allthe way to the floor while cranking for up to15 seconds maximum. Wait at least15 seconds between each try, to allow t...

Engine Coolant Heater Your vehicle may be equipped with an enginecoolant heater. In very cold weather, 0°F ( − 18°C) or colder, the engine coolant heater can help. You will get easierstarting and better fuel economy during enginewarm-up. Usually, the coolant heater should be plugged in aminimum of f...

4. Plug it into a normal, grounded 110-volt AC outlet. { CAUTION: Plugging the cord into an ungroundedoutlet could cause an electrical shock.Also, the wrong kind of extension cordcould overheat and cause a fire. Youcould be seriously injured. Plug the cordinto a properly grounded three-prong110-volt...

{ CAUTION: It is dangerous to get out of your vehicleif the shift lever is not fully in PARK (P)with the parking brake firmly set. Yourvehicle can roll. Do not leave your vehicle when the engineis running unless you have to. If you haveleft the engine running, the vehicle canmove suddenly. You or ot...

Driver Shift Control (DSC) Notice: If you drive your vehicle at high RPMs without upshifting while using DriverShift Control (DSC), you could damage yourvehicle. Always upshift when necessary whileusing DSC. Your automatic transmission has a Driver ShiftControl (DSC) feature that allows you to chang...

Parking Brake The parking brakepedal is located on thelower portion of theinstrument panel tothe left of the steeringwheel. This vehicle has a push-to-release parking brakepedal. To set the parking brake, hold theregular brake pedal down with your right foot andpush the parking brake pedal down with...

Leaving Your Vehicle With the EngineRunning { CAUTION: It can be dangerous to leave your vehiclewith the engine running. Your vehiclecould move suddenly if the shift lever isnot fully in PARK (P) with the parkingbrake firmly set. And, if you leave thevehicle with the engine running, it couldoverheat...

Shifting Out of Park (P) Your vehicle has an automatic transmission shiftlock control system. You have to fully applyyour regular brake before you can shift fromPARK (P) when the vehicle is running. See Automatic Transmission Operation on page 116 . If you cannot shift out of PARK (P), ease pressure...

Engine Exhaust { CAUTION: Engine exhaust can kill. It contains thegas carbon monoxide (CO), which youcannot see or smell. It can causeunconsciousness and death. You might have exhaust coming in if: • The exhaust system sounds strangeor different. • Your vehicle gets rusty underneath. • Your vehicle ...

Running the Engine While Parked It is better not to park with the engine running. But ifyou ever have to, here are some things to know. { CAUTION: Idling the engine with the climate controlsystem off could allow dangerous exhaustinto your vehicle. See the earlier cautionunder Engine Exhaust on page ...

Mirrors Automatic Dimming Rearview Mirrorwith Intellibeam™ and OnStar ® Your vehicle may have an Intellibeam™ insiderearview mirror with OnStar ® controls. For more information about OnStar ® , see OnStar ® System on page 132 . To turn on and enable Intellibeam™, press andrelease the Intellibeam™ bu...

Mirror Operation O (On/Off): Press and hold the button, located on the lower left side of the mirror face, for aboutthree seconds to turn the automatic dimmingfeature on or off. The indicator light will illuminatewhen this feature is active. The automatic dimmingfeature is active each time the vehic...

The mirror can be calibrated by driving the vehiclein circles at 5 mph (8 km/h) or less until thedisplay reads a direction. The compass can be placed in calibration modemanually by pressing and holding the on/off buttonuntil a C is shown in the compass display. Compass Variance The zone is set to zo...

Cleaning the Mirror When cleaning the mirror, use a paper towel orsimilar material dampened with glass cleaner.Do not spray glass cleaner directly on the mirroras that may cause the liquid cleaner to enterthe mirror housing. Outside Power Heated Mirrors The power mirrorcontrol is on the driver’sdoor...

OnStar ® System OnStar ® uses several innovative technologies and live advisors to provide you with a wide rangeof safety, security, information, and convenienceservices. If your airbags deploy, the system isdesigned to make an automatic call to OnStar ® Emergency advisors who can request emergencys...

OnStar ® Steering Wheel Controls Your vehicle may have a Talk/Mute button thatcan be used to interact with OnStar ® Hands-Free Calling. See Audio Steering Wheel Controls on page 310 for more information. On some vehicles, you may have to hold thebutton for a few seconds and give the command“ONSTAR” ...

Your vehicle must have a working electricalsystem (including adequate battery power) for theOnStar ® equipment to operate. There are other problems OnStar ® cannot control that may prevent OnStar ® from providing OnStar ® service to you at any particular time or place. Some examples aredamage to imp...

Using Universal Home Remote Press and hold the appropriate button for at leasthalf of a second. The indicator light will comeon while the signal is being transmitted. Reprogramming Universal HomeRemote Buttons You can reprogram any of the three buttons byrepeating the instructions. Erasing Universal...

Read the instructions completely before attemptingto program the Universal Home Remote.Because of the steps involved, it may be helpful tohave another person available to assist you inthe programming steps. Keep the original hand-held transmitter for use inother vehicles as well as for future Univer...

Gate Operator and CanadianProgramming Canadian radio-frequency laws require transmittersignals to time out or quit after several secondsof transmission. This may not be long enoughfor Universal Home Remote to pick up the signalduring programming. Similarly, some U.S. gateoperators are manufactured t...

Reprogramming a Single UniversalHome Remote Button To program a device to Universal Home Remoteusing a Universal Home Remote buttonpreviously trained, follow these steps: 1. Press and hold the desired Universal Home Remote button. Do not release the button. 2. The indicator light will begin to flash...

Sunroof If your vehicle has apower sunroof, theswitches are located onthe overhead console. To open or close the sunroof, the ignition must beon or Retained Accessory Power (RAP) mustbe active. See Retained Accessory Power (RAP) on page 112 . Express Open: The express open feature will operate from ...

Anti-Pinch: If an object is in the path of the sunroof while it is closing, the anti-pinch featurewill detect the object and stop the sunrooffrom closing at the point of the obstruction. Thesunroof will then return to the full-open orvent position. To close the sunroof once it hasre-opened, refer to...

Certain features can be programmed not to recalluntil the ignition is turned off. To change feature preferences, use the followingprocedure. Entering the Personal Settings Menu To enter the feature programming mode, usethe following procedure: 1. Be sure the ignition is either on, in Acc., or in RAP...

Personal Settings Menu Items The PERSONAL SETTINGS MENU must beselected with a check mark to program thepersonalization features. If it is not selected, pressthe tune/select knob until the check markappears. If it is selected, the entire list of featureswill be available to program. DRIVER GREETING ...

KEY FOB REMINDER This feature chirps the horn three times when thedriver’s door is closed and there is a keylessaccess transmitter left inside of the vehicle. Thiswill only occur when the vehicle is off. Programmable Modes Mode 1: ON Mode 2: OFF Before your vehicle was shipped from the factory,it wa...

REMOTE RECALL MEMORY If your vehicle has the optional memory package,you will have this feature. When this feature isturned on, you can recall any previouslyprogrammed seat position and mirror positionwhen the unlock button on the keyless accesstransmitter is pressed. Programmable Modes Mode 1: ON M...

Programmable Modes Mode 1: ON Mode 2: OFF Before your vehicle was shipped from the factory,it was programmed to Mode 2. The mode towhich the vehicle was programmed may havebeen changed since it left the factory. To program the vehicle to a different mode, usethe following procedure: 1. Enter the PER...

To program the vehicle to a different mode, usethe following procedure: 1. Enter the PERSONAL SETTINGS MENU by following the instructions listed previouslyunder “Entering the Personal Settings Menu.” 2. Turn the tune/select knob until AUTO EXIT SEAT is highlighted. 3. Press the tune/select knob to s...

LIGHTS FLASH AT UNLOCK This feature allows the exterior lamps to flashwhen the keyless access transmitter is usedto unlock the vehicle. All doors must be closed forthis feature to work, and the lamps will notflash if the parking lamps or headlamps are on. If LIGHTS FLASH AT UNLOCK is turned onand ei...

LIGHTS FLASH AT LOCK This feature allows the exterior lamps to flashonce when the keyless access transmitter is usedto lock the vehicle. All doors must be closed forthis feature to work, and the lamps will not flash ifthe parking lamps or headlamps are on. If LIGHTS FLASH AT LOCK is turned on andeit...

EXT. (Exterior) LIGHTS AT UNLOCK This feature turns on the exterior lamps when thekeyless access transmitter is used to unlockthe vehicle. The lamps will remain on for about20 seconds unless a door is opened, the ignition isin Acc., on, or START, or the keyless accesstransmitter is used to lock the ...

To program the vehicle to a different mode, usethe following procedure: 1. Enter the PERSONAL SETTINGS MENU by following the instructions listed previouslyunder “Entering the Personal Settings Menu.” 2. Turn the tune/select knob until HORN CHIRPS AT LOCK is highlighted. 3. Press the tune/select knob...

To determine the mode to which the vehicle isprogrammed or to program the vehicle to adifferent mode, use the following procedure: 1. Enter the PERSONAL SETTINGS MENU by following the instructions listed previouslyunder “Entering the Personal Settings Menu.” 2. Turn the tune/select knob until TWILIG...

DOORS UNLOCK AT OFF This feature allows all of the doors to automaticallyunlock when the ignition is turned off. Programmable Modes Mode 1: ON Mode 2: OFF Before your vehicle was shipped from the factory,it was programmed to Mode 2. The mode towhich the vehicle was programmed may havebeen changed si...

3. Press the tune/select knob to switch back and forth between on and off. When the mode is turned on, a check markwill appear next to the feature name. The mode you selected is now set. You can eitherexit the programming mode by following theinstructions later in this section or program thenext fea...

KEYLESS FT (Front) DOOR UNLOCK This feature automatically unlocks the appropriatefront door when you approach the vehicle withyour keyless access transmitter and pull therespective door handle. See Door Locks on page 98 for more information. Programmable Modes Mode 1: ON Mode 2: OFF Before your vehi...

To program the vehicle to a different mode, usethe following procedure: 1. Enter the PERSONAL SETTINGS MENU by following the instructions listed previouslyunder “Entering the Personal Settings Menu.” 2. Turn the tune/select knob until KEYLESS DOORS UNLOCK is highlighted. 3. Press the tune/select kno...

KEYLESS LOCK DELAY This feature allows you to select whether thedoors automatically lock during normal vehicle exit.When the ignition is turned off and all doorsbecome closed, the vehicle will determine howmany keyless access transmitters remain inthe vehicle interior. If at least one keyless access...

FRONT PASS (Passenger) WINDOW LOCK This feature allows you to choose whether ornot to have the front passenger windowdeactivated as part of the window lockout button.If you would like the front passenger windowto be deactivated when the window lockout buttonis pushed, turn this feature on. If this f...

To program the vehicle to a different mode, usethe following procedure: 1. Enter the PERSONAL SETTINGS MENU by following the instructions listed previouslyunder “Entering the Personal Settings Menu.” 2. Turn the tune/select knob until CHIME VOLUME HIGH is highlighted. 3. Press the tune/select knob t...

The mode you selected is now set. You can eitherexit the programming mode by following theinstructions later in this section or program thenext feature available on your vehicle by pressingthe F6 (BACK) button, located on the radio, toreturn to the PERSONAL SETTINGS MENU. Exiting the Personal Settin...

Driver Selection Submenu Items DRIVER 1/DRIVER 2 The numbers on the back of each keyless accesstransmitter correspond to DRIVER 1 andDRIVER 2. If you would like to recall or storedriver settings for the driver that does notcorrespond to the number on the back of thekeyless access transmitter that yo...

STORE DRIVER SETTINGS To store driver settings, use the followingprocedure: 1. Adjust your settings for the driver’s seat, the outside rearview mirrors, and the steeringcolumn to a comfortable driving position. 2. Enter the memory programming mode for your driver settings by following theinstruction...

Driver Exit Settings Submenu Items RECALL EXIT SETTINGS To recall exit settings, use the following procedure: 1. Enter the memory programming mode for your exit settings by following the instructionslisted previously under “Entering the DriverExit Settings Submenu.” 2. From the DRIVER EXIT SETTINGS ...

Instrument Panel Overview ........................ 178 Hazard Warning Flashers .......................... 180Other Warning Devices ............................. 180Horn .......................................................... 180Power Tilt Wheel and Telescopic Steering Column ........................

Passenger Airbag Status Indicator ............. 245Charging System Light .............................. 247Brake System Warning Light ..................... 248Anti-Lock Brake System Warning Light ...... 249Low Tire Pressure Warning Light .............. 249Traction Control System (TCS) Warning Light ...

Power Tilt Wheel and TelescopicSteering Column The power tilt andtelescope wheel controlis located on theoutboard side of thesteering column. To operate the power tilt feature, move the controlup or down to tilt the steering wheel up or down. To set the memory position, see Vehicle Personalization o...

Turn Signal/Multifunction Lever The lever on the left side of the steering columnincludes the following: • G Turn and Lane-Change Signals. See Turn and Lane-Change Signals on page 182 . • O Headlamps. See Headlamps on page 211 . • 3 Headlamp High/Low-Beam Changer. See Headlamp High/Low-Beam Changer ...

Raise or lower the lever until the arrow starts toflash to signal a lane change. Hold it there until thelane change is complete. The lever returns to itsoriginal position when it is released. Rapid flashing of arrows when signaling for a turnor lane change may be caused by a burned-outsignal bulb. O...

Make sure the Head-Up Display is on andproperly adjusted. If the HUD is not on, FCA willnot be enabled and you will not be providedwith FCA audible and visual warnings. See Head-Up Display (HUD) on page 223 for more information. { CAUTION: • On winding roads, FCA may not detecta vehicle ahead. You c...

Warning the Driver The alert symbol willflash on the HUD anda warning beep willsound when driveraction may be required. The driver warning is active when: • You are approaching a vehicle too quickly. • You are following a vehicle ahead muchtoo closely. See Defensive Driving on page 316 for more info...

Unnecessary Warnings FCA may occasionally provide an unnecessarywarning to guard rails, signs, and other stationaryobjects. This is normal operation, your vehicledoes not need service. Other Messages There are three messages that may appear on theDriver Information Center (DIC). They areCLEAN RADAR,...

Windshield Wipers The lever on the right side of the steering columnoperates the windshield wipers. 7 (Mist): Pull the lever down and release it for a single wiping cycle. The lever will return to itsoriginal position. For more cycles, hold thelever down before releasing it. 9 (Off): Put the lever i...

Heavy snow or ice can overload the wiper motor. Acircuit breaker will stop the motor until it cools down.Clear away snow or ice to prevent an overload. Your vehicle (STS-V only) is equipped with afeature that disables the wiper system when thehood is open and your vehicle is stopped. Openingthe hood...

The mist and wash cycles operate as normal andare not affected by the Rainsense™ function.The Rainsense™ system can be overridden at anytime by manually turning the wiper band to lowor high speed. When Rainsense™ is active, the headlamps willturn on automatically. The headlamps will turnoff again on...

Headlamp Washer Your vehicle may have headlamp washers.The headlamp washers clear debris from theheadlamp lenses. The headlamp washers are located to the insideof the headlamps. To wash the headlamps, press the washer buttonlocated at the end of the windshield wiper lever.The headlamps will be washe...

Cruise Control These controls arelocated on the end ofthe multifunction lever. 9 (Off): Move to this position to turn the system off. R (On): Move to this position to turn on the system. + (Resume/Accelerate): Move to this position to make the vehicle resume a previously set speed orto accelerate wh...

If you apply your brakes, the cruise control willshut off. { CAUTION: Cruise control can be dangerous whereyou cannot drive safely at a steady speed.So, do not use your cruise control onwinding roads or in heavy traffic. Cruise control can be dangerous onslippery roads. On such roads, fastchanges in...

Resuming a Set Speed Suppose you set the cruise control at a desiredspeed and then you apply the brake. This, ofcourse, disengages the cruise control. But it doesnot need to be reset. Once you are going about 25 mph (40 km/h) ormore, you can move the cruise control switchbriefly from on to resume/ac...

Adaptive Cruise Control If your vehicle has this feature, be sure to readthis entire section before using it. The system operates on a radio frequency subjectto Federal Communications Commission (FCC)Rules and with Industry Canada. This device complies with Part 15 of the FCCRules. Operation is subj...

To disengage Adaptive Cruise Control, apply thebrake. If no vehicle is in your path, your vehiclewill react like traditional cruise control. { CAUTION: Adaptive Cruise Control will not applyhard braking or bring the vehicle to acomplete stop. It will not respond tostopped vehicles, pedestrians or an...

To set Adaptive Cruise Control, do the following: 1. Make sure the Head-Up Display (HUD) is on and properly adjusted. You cannotengage Adaptive Cruise Control unless theHUD is on. See Head-Up Display (HUD) on page 223 for more information. 2. Move the switch to on. 3. Get up to the speed you want. 4...

Increasing Set Speed While Using AdaptiveCruise Control There are two ways to increase the set speed: • Use the accelerator to get to the higher speed.Press the set button at the end of the lever,then release the button and the acceleratorpedal. You will now cruise at the higher speed. • Move the Ad...

Alerting the Driver The alert symbol willflash on the HUD and awarning beep willsound when driveraction is required. Driver action is required when: • Adaptive Cruise Control cannot apply sufficientbraking because you are approaching avehicle too rapidly. • The vehicle speed drops below about20 mph ...

Approaching and Following a Vehicle The vehicle aheadsymbol will only appearon the HUD when avehicle ahead isdetected in your path. If this symbol does not appear, or disappearsbriefly, Adaptive Cruise Control will not respond tovehicles you may see ahead. { CAUTION: When the Adaptive Cruise Control...

Stationary or Very Slow-Moving Objects { CAUTION: Adaptive Cruise Control may not detectand react to stationary or slow-movingvehicles or other objects ahead of you.You could crash into an object ahead ofyou. Do not use Adaptive Cruise Controlwhen approaching stationary orslow-moving vehicles or oth...

Low-Speed Deactivation If your speed falls below 20 mph (32 km/h) whilefollowing a vehicle ahead, Adaptive Cruise Controlwill begin to disengage. The driver alert symbolon the HUD will flash and the warning beepwill sound. The driver must take action sinceAdaptive Cruise Control will not slow the ve...

Curves in the Road { CAUTION: Due to Adaptive Cruise Control limitationsin curves, it may respond to a vehicle inanother lane, or may not have time toreact to a vehicle in your lane. You couldcrash into a vehicle ahead of you, or losecontrol of your vehicle. Give extraattention in curves and be read...

Adaptive Cruise Control may detect a vehicle thatis not in your lane and apply the brakes. Adaptive Cruise Control may, occasionally,provide a driver alert and/or braking that youconsider unnecessary. It could respond to signs,guardrails and other stationary objects whenentering or exiting a curve. ...

Other Messages There are three messages that may appear on theDIC. They are SERVICE RADAR CRUISE,RADAR CRUISE NOT READY and CLEANRADAR. These messages will appear to indicatea problem with the Adaptive Cruise Control.See DIC Warnings and Messages on page 264 for more information. Cleaning the System...

IntelliBeam™ Intelligent High-BeamHeadlamp Control System If your vehicle has this feature, be sure to readthis entire section before using it. IntelliBeam™ is an enhancement to the vehicle’sheadlamp system. Using a digital light sensorlocated on the back of the rearview mirror,this system turns the...

Disabling and Resetting IntelliBeam™ atthe Rearview Mirror IntelliBeam™ can be disabled and reset to theoriginal factory setting by using the controls on theinside rearview mirror. AUTO 3 (IntelliBeam™ On/Off): To disable the system, press this button on the inside rearviewmirror. The IntelliBeam™ i...

Headlamps on Reminder A warning chime will sound if the exterior lampcontrol is left on in either the headlamp or parkinglamp position and the driver’s door is openedwith the ignition off. See Lights On Reminder on page 256 for additional information. Daytime Running Lamps (DRL) Daytime Running Lamp...

An AUTOMATIC LIGHTS OFF message willappear on the DIC, showing that automatic lightinghas been disabled. As with any vehicle, you should turn on theregular headlamp system when you need it. Light Sensor The light sensor for the DRL is located on top ofthe instrument panel. If you cover the sensor, i...

Twilight Sentinel ® Twilight Sentinel ® can turn your lamps on and off for you. A light sensor on top of the instrument panelmakes the Twilight Sentinel ® work, so be sure it is not covered. With Twilight Sentinel ® the following will happen: • When it is dark enough outside, the frontturn signal la...

Twilight Sentinel ® also provides exterior illumination as you leave the vehicle. If TwilightSentinel ® has turned on the lamps when you turn off the ignition, the lamps will remain on until: • The exterior lamp switch is moved from off tothe parking lamp position. • A delay time that you select has...

Instrument Panel Brightness This feature controls thebrightness of theinstrument panel lights. Press in the center knob on the DIC control paneluntil the knob pops out. Then turn the knobclockwise to brighten the lights or counterclockwiseto dim them. If you turn the knob completelyclockwise, the in...

Reading Lamps The reading lamps are located on the overheadconsole. These lamps come on automatically whenany door is opened. For manual operation, press the button next toeach lamp to turn it on or off. If the reading lamps are left on, they automaticallyshut off 10 minutes after the ignition has b...

The battery can be discharged at idle if theelectrical loads are very high. This is true for allvehicles. This is because the generator (alternator)may not be spinning fast enough at idle toproduce all the power that is needed for very highelectrical loads. A high electrical load occurs when several...

To turn the HUD image off, turn the knobcounter-clockwise.Polarized sunglasses could make the HUD imageharder to see.As light shines out from the HUD, it is possible forlight to shine back in. In rare occurrences,when the sun is at a specific angle and position,the sun’s rays can shine back into the...

The URPA display islocated inside thevehicle, above therear window. It hasthree color-coded lightsthat can be seenthrough the rearviewmirror or by turningaround. How the System Works URPA comes on automatically when the shift leveris moved into REVERSE (R) and the vehiclespeed is less than 3 mph (5 ...

When the System Does Not Seem to WorkProperly The light may flash red when the vehicle is inREVERSE (R), if the ultrasonic sensors are notkept clean. So be sure to keep your rear bumperfree of mud, dirt, snow, ice and slush. Otherconditions that may affect system performanceinclude things like the v...

Certain accessory power plugs may not becompatible to the accessory power outlet andcould result in blown vehicle or adapter fuses. Ifyou experience a problem, see your dealerfor additional information on the accessorypower outlets. Notice: Adding any electrical equipment to your vehicle may damage ...

Cigarette Lighter Notice: Holding a cigarette lighter in while it is heating will not allow the lighter to backaway from the heating element when it is hot.Damage from overheating may occur to thelighter or heating element, or a fuse could beblown. Do not hold a cigarette lighter inwhile it is heati...

Manual Operation y N z (Mode): Pressing the mode switch and changing the mode cancels automatic operationand allows the operator to manually select the airdelivery location. Press AUTO to return toautomatic operation. The outboard air outlets always receive airflowregardless of the mode selected. Se...

Sensors There is a solar sensor located on the instrumentpanel, near the windshield. There is also an interior temperature sensorlocated next to the steering wheel on theinstrument panel. These sensors monitor the solar radiation and theair inside the vehicle, then use the informationto adjust the t...

The recirculation mode is cancelled when thesystem enters the defog mode. If recirculation isselected while in the defog mode, it is cancelledafter 10 minutes. If there is fogging on the side windows, remain indefog or defrost mode until they clear. 0 (Defrost): Press this button to direct most of t...

Outlet Adjustment Use the lever located in the center of each outletto change the direction of the airflow, eitherside-to-side or up and down. Use the thumbwheelsto open or close the outlets to adjust the airflow.Turn the thumbwheel towards the centerconsole to open the outlets and allow themaximum ...

The right knob controls the air delivery to the rearpassengers. Turning the knob all the way tothe left will shut off airflow to the rear passengers.Operating with the rear air delivery off maymake the entire vehicle warm or cool less quickly.It may also increase the air rush sound of thefront syste...

Passenger Compartment Air Filter Your vehicle may be equipped with a passengercompartment air filter. There are two types of filtersavailable. There is a standard dust filter thattraps small particles including pollen. There is,also, a dust/odor filter available that traps dust andpollen and also us...

Instrument Panel Cluster The instrument panel cluster is designed to let you know at a glance how your vehicle is running. You willknow how fast you are going, how much fuel you are using and many of the other things you will needto know to drive safely and economically. United States Base version s...

Speedometer and Odometer Your speedometer lets you see your speed inboth miles per hour (mph) and kilometers perhour (km/h). See “MPH (km)” under DIC Controls and Displays on page 258 for more information. The odometer mileage can be checked without thevehicle running. Your vehicle’s odometer workst...

Passenger Safety BeltReminder Light Several seconds after the ignition button ispressed to START, a chime will sound for severalseconds to remind the front passenger tobuckle their safety belt. This would only occur ifthe passenger airbag is enabled. See Passenger Sensing System on page 74 for more ...

{ CAUTION: If the airbag readiness light stays on afteryou start your vehicle, it means the airbagsystem may not be working properly. Theairbags in your vehicle may not inflate ina crash, or they could even inflate withouta crash. To help avoid injury to yourselfor others, have your vehicle serviced...

If the word OFF or the off symbol is lit on theairbag status indicator, it means that thepassenger sensing system has turned off the rightfront passenger’s frontal airbag. See Passenger Sensing System on page 74 for more on this, including important safety information. If, after several seconds, all...

Brake System Warning Light Your vehicle’s hydraulic brake system is dividedinto two parts. If one part isn’t working, theother part can still work and stop you. For goodbraking, though, you need both parts working well. If the warning light comes on, there is a brakeproblem. Have your brake system i...

Anti-Lock Brake SystemWarning Light With the Anti-LockBrake System (ABS),this light will comeon when your engine isstarted and may stayon for several seconds.That is normal. If the ABS warning light comes on and stays on,there may be a problem with the antilock portion ofthe brake system. If the bra...

Engine Coolant TemperatureWarning Light The engine coolanttemperature warninglight will come on whenthe engine is very hot. This light will also come on briefly when thevehicle is started. If the light does not go out or comes on and stayson while driving, there may be a problem withthe cooling syst...

Malfunction Indicator Lamp Check Engine Light Your vehicle has acomputer whichmonitors operation ofthe fuel, ignition,and emission controlsystems. This system is called OBD II (On-BoardDiagnostics-Second Generation) and is intendedto assure that emissions are at acceptablelevels for the life of the ...

This light should come on briefly, as a check toshow you it is working, as you start the engine. Ifthe light does not come on, have it repaired.This light will also come on during a malfunction inone of two ways: • Light Flashing — A misfire condition has been detected. A misfire increases vehicleem...

Your vehicle will not pass this inspection if the OBD(on-board diagnostic) system determines thatcritical emission control systems have not beencompletely diagnosed by the system. The vehiclewould be considered not ready for inspection.This can happen if you have recently replaced thebattery or if t...

Security Light For informationregarding this light,see Theft-Deterrent System on page 108 . Fog Lamp Light The fog lamp light willcome on when the foglamps are in use. The light will go out when the fog lamps areturned off. See Fog Lamps on page 217 for more information. Lights On Reminder This ligh...

Highbeam On Light This light comes onwhenever thehigh-beam headlampsare on. See “Intellibeam™ Intelligent High-BeamHeadlamp Control System” under Headlamps on page 211 and Headlamp High/Low-Beam Changer on page 183 for more information. Fuel Gage The fuel gage showsapproximately howmuch fuel is in t...

Driver Information Center (DIC) The Driver Information Center (DIC) gives you thestatus of many of your vehicle’s systems. The DICis also used to display warning/status messages.All messages will appear in the DIC display locatedat the bottom of the instrument panel cluster, belowthe tachometer and ...

DIC Buttons (Base Level) If your vehicle doesnot have a Head-UpDisplay (HUD),these are thebuttons for the DIC. « 4 ª (Information): Press the top or bottom of this button to scroll through the available vehicleinformation displays which include digitalspeed display, if your vehicle has this feature,...

Information Display Menu Items The following display menu items can be displayedby pressing the information button. MPH (km/h) If your vehicle has this display, it shows thevehicle’s speed digitally in either miles perhour (mph) or kilometers per hour (km/h). MILES RANGE (km RANGE) This display show...

AVG MPH (AVG km/h) This display shows the average speed of thevehicle in miles per hour (mph) or kilometers perhour (km/h). This average is calculated based onthe various vehicle speeds recorded since the lastreset of this display. To reset AVG MPH, press thereset button. The display will return to ...

LR TIRE: This display shows the air pressure in the driver’s side rear tire. RR TIRE: This display shows the air pressure in the passenger’s side rear tire. If the tire pressure display shows dashes insteadof a value, there may be a problem with yourvehicle. If this consistently occurs, see your dea...

OIL PRESSURE (STS-V Only) This display shows the oil pressure in eitherpounds per square inch (psi) or kilopascals (kPa). TRANS (Transmission) FLUID TEMP(Temperature) (STS-V Only) This display shows the transmission fluidtemperature in either degrees Fahrenheit (°F) ordegrees Celsius (°C). Trip Info...

AUTOMATIC LIGHTS OFF This message displays when the automaticheadlamps are turned off. See Headlamps on page 211 for more information. AUTOMATIC LIGHTS ON This message displays when the automaticheadlamps are turned on. See Headlamps on page 211 for more information. BATTERY NOT CHARGING SERVICECHAR...

To help the generator recharge the battery quickly,you can reduce the load on the electrical systemby turning off the accessories. The normal battery voltage range is11.5 to 15.5 volts. You can monitor battery voltageon the DIC by pressing the information buttonuntil you find BATTERY VOLTS. CHANGE E...

CHECK WASHER FLUID This symbol appearswith this message. This message displays when your vehicle is lowon windshield washer fluid. Refill the windshieldwasher fluid reservoir as soon as possible.See Windshield Washer Fluid on page 404 for more information. CLEAN RADAR This message displays when the ...

ENGINE COOLANT HOT IDLE ENGINE Notice: If you drive your vehicle while the engine is overheating, severe engine damagemay occur. If an overheat warning appearson the instrument panel cluster and/or DIC,stop the vehicle as soon as possible. Do notincrease the engine speed above normal idlingspeed. Se...

ENGINE OVERHEATED STOP ENGINE Notice: If you drive your vehicle while the engine is overheating, severe engine damagemay occur. If an overheat warning appearson the instrument panel cluster and/orDIC, stop the vehicle as soon as possible.See Engine Overheating on page 393 for more information. This ...

FUEL LEVEL LOW This symbol appearswith this message. This message displays when your vehicle is lowon fuel. Refill the fuel tank as soon as possible.A single chime sounds when this message isdisplayed. HOOD AJAR This symbol appearswith this message. This message displays if the hood was not closedco...

NO FOBS DETECTED This message displays if the vehicle does notdetect the presence of a keyless accesstransmitter when you have attempted to start thevehicle or a vehicle door has just closed. Thefollowing conditions may cause this messageto appear: • Driver-added equipment plugged into theaccessory ...

NO FOB OFF OR RUN? This message displays when the keyless accesstransmitter is not detected inside the vehiclewhile you are trying to turn the ignition off. Yourvehicle may be near a strong radio antenna signalcausing the keyless access system to be jammed.The vehicle remains in Acc. until OFF or ST...

PRESS START AND BRAKE TOSTART ENGINE This message displays when you need to pressdown on the brake pedal while pressing thestart button on the electronic keyless ignition whentrying to start your vehicle. See Starting the Engine on page 113 for more information. RADAR CRUISE NOT READY This message d...

SERVICE AIR BAG This message displays when there is a problemwith the airbag system. Have your vehicle servicedby your dealer immediately. See Airbag Readiness Light on page 244 for more information. SERVICE BRAKE ASSIST This message displays when a problem with thepanic brake assist system has been...

SERVICE TIRE MONITOR If your vehicle has a Tire Pressure Monitor (TPM)system, this message displays if a part on thesystem is not working properly. If you drive yourvehicle while any of the four sensors aremissing or inoperable, the warning comes on inabout 20 minutes. A sensor would be missing, for...

THEFT ATTEMPTED This symbol appearswith this message. This message displays if the theft-deterrentsystem has detected a break-in attempt while youwere away from your vehicle. TRACTION ACTIVE This message displays when the Traction ControlSystem (TCS) is actively limiting wheel spin.Slippery road con...

Notice: Before adding any sound equipment to your vehicle, such as an audio system,CD player, CB radio, mobile telephone,or two-way radio, make sure that it can beadded by checking with your dealer. Also,check federal rules covering mobile radio andtelephone units. If sound equipment can beadded, it...

Setting the Date 1. Press the tune/select knob (the right knob) to enter the main menu. 2. Turn the tune/select knob until SET DATE displays. 3. Press the tune/select knob to select SET DATE. 4. Turn the tune/select knob to adjust the date. 5. Press the tune/select knob to update the time. VEHICLE D...

This system relies upon receiving specificinformation from these stations and only workswhen the information is available. In rare cases, aradio station can broadcast incorrect informationthat causes the radio features to work improperly.If this happens, contact the radio station. While the radio is...

3. Press the tune/select knob to select either LOCAL or DISTANT. 4. Press the BACK (F6) button to exit the display. To return to the original display,repeatedly press the BACK (F6) button or waitfor the display to time out. To search for stations, press the single arrowbuttons. If the system is set ...

Adjusting the Speakers (Balance/Fade) To adjust the balance or fade, perform thefollowing steps: 1. Press the tune/select knob to enter the main menu. 2. Turn the tune/select knob until BASS-MID-TREBLE displays. 3. Press the tune/select knob to enter the tone settings. 4. Press the tune/select knob ...

Radio Message THEFTLOCK: This message is displayed when the THEFTLOCK ® system has been activated. Take the vehicle to the dealer for service. Radio Messages for XM™ Only See XM Radio Messages on page 303 later in this section for further detail. Using the Single CD Player Insert a CD partway into t...

Do not add any label to a CD, it could get caughtin the CD player. If a CD is recorded on apersonal computer and a description label isneeded, try labeling the top of the recorded CDwith a marking pen. Notice: If a label is added to a CD, or more than one CD is inserted into the slot at a time,or an...

©¨ (Scan): Press the double arrow button to listen to each track for 10 seconds. The CD goesto a track, plays for 10 seconds, then goes tothe next track. Press this button again to stopscanning. SRCE (Source): Press this button to select a source, either radio or CD. The CD must be loadedto select t...

Playing an MP3 CD-R Disc The vehicle’s radio system could have the MP3feature. If it has this feature, it is capable of playingan MP3 CD-R disc. For more information on howto play an MP3 CD-R disc, see Using an MP3 on page 297 later in this section. CD Messages If the CD comes out, it could be for o...

5. Press the tune/select knob to enter into CONFIGURE DISPLAY KEYS. 6. Turn the tune/select knob to select which of the four configurable keys you would like tochange. The currently assigned featuredisplays. 7. Press the tune/select knob to select the configurable key to change. 8. Turn the tune/sel...

Order of Play Tracks are played in the following order: • Play begins from the first track in the firstplaylist and continues sequentially throughall tracks in each playlist. When the last trackof the last playlist has played, play continuesfrom the first track of the first playlist. • If the CD doe...

As each new track starts to play, the tracknumber displays. The CD player can play the smaller 3 inch (8 cm)single CDs with an adapter ring. Full-size CDsand the smaller CDs are loaded in the samemanner. If playing a CD-R, the sound quality can bereduced due to CD-R quality, the method ofrecording, ...

XM Radio Messages Radio Display Message Condition Action Required XL (Explicit LanguageChannels) XL on the radio display,after the channel name,indicates content withexplicit language. These channels, or any others, can be blocked at acustomer’s request, by calling 1-800-852-XMXM (9696). XM Updating...

B SET DATE: Use this menu item to set the date. See Setting the Time on page 281 for more information. 4 (Information): This menu item is used to display XM™ satellite radio service and CD MP3playback information. See “ 4 (Information)” under Radio with CD on page 282 for more information. LANG (Lan...

DRIVER SELECTION When you select this item, the following submenudisplays: • DRIVER 1 • DRIVER 2 • RECALL DRIVER SETTINGS • STORE DRIVER SETTINGS For more information on the DRIVER SELECTIONsubmenu item, see “Recalling Driver Settings”and “Storing Driver Settings” under Memory Seat, Mirrors and Stee...

Audio Steering Wheel Controls Some audio controlscan be adjusted at thesteering wheel. Theyinclude the following: 0 (Mute): Press this button to silence the system. Press this button again, or any other radiobutton, to turn the sound on. SRCE (Source): Press this button to switch between FM1, FM2, A...

If your vehicle has the navigation system, pressthis button to initiate voice recognition. See “VoiceRecognition” in the Navigation System manualfor more information. While in Voice Recognition,say “OnStar” to interact with the OnStar ® system. See the OnStar ® System on page 132 in this manual for ...

Radio Reception Frequency interference and static can occurduring normal radio reception if items such ascellphone chargers, vehicle convenienceaccessories, and external electronic devices areplugged into the accessory power outlet. If there isinterference or static, unplug the item from theaccessor...

Cellular Phone Usage Cellular phone usage could cause interferencewith your vehicle’s radio. This interferencecould occur when making or receiving phone calls,charging the phone’s battery, or simply havingthe phone on. This interference is an increasedlevel of static while listening to the radio. If...

Diversity Antenna System The AM-FM antenna is integrated with the rearwindow defogger, located in the rear window.Make sure that the inside surface of the rearwindow is not scratched and that the grid lines onthe glass are not damaged. If the inside surfaceis damaged, it could interfere with radio r...

Your Driving, the Road, and Your Vehicle ............................................ 316 Defensive Driving ...................................... 316Drunken Driving ........................................ 317Control of a Vehicle .................................. 320Braking ..........................

Your Driving, the Road, andYour Vehicle Defensive Driving The best advice anyone can give about driving is:Drive defensively. Please start with a very important safety device inyour vehicle: Buckle up. See Safety Belts: They Are for Everyone on page 15 . { CAUTION: Defensive driving really means “Be...

Drunken Driving Death and injury associated with drinking anddriving is a national tragedy. It is the numberone contributor to the highway death toll, claimingthousands of victims every year. Alcohol affects four things that anyone needs todrive a vehicle: • Judgment • Muscular Coordination • Vision...

Control of a Vehicle You have three systems that make your vehicle gowhere you want it to go. They are the brakes, thesteering, and the accelerator. All three systemshave to do their work at the places where the tiresmeet the road. Sometimes, as when you are driving on snow orice, it is easy to ask ...

Remember: ABS does not change the time youneed to get your foot up to the brake pedalor always decrease stopping distance. If you gettoo close to the vehicle in front of you, you will nothave time to apply the brakes if that vehiclesuddenly slows or stops. Always leave enoughroom up ahead to stop, e...

The traction control system automatically comeson whenever you start your vehicle. To limit wheelspin, especially in slippery road conditions, youshould always leave the system on. But youcan turn the traction control system off if youever need to. Notice: Do not repeatedly brake or accelerate heavi...

Competitive Driving Mode (STS-V) The driver can select this optional handling modeby pressing the Traction Control button, locatednear the shift lever, twice within five seconds.Competitive driving mode allows the driver to havecontrol of the power applied to the rear wheels,while the StabiliTrak ® ...

Panic Brake Assist Your vehicle has a panic brake assist system thatmonitors the intention of the driver while braking. Ifthe system senses that the driver has appliedhard/fast pressure to the brake pedal, the systemwill generate additional pressure, making it easierfor the driver to maintain brake ...

Steering in Emergencies There are times when steering can be moreeffective than braking. For example, you comeover a hill and find a truck stopped in your lane, ora car suddenly pulls out from nowhere, or achild darts out from between parked cars andstops right in front of you. You can avoid thesepr...

Off-Road Recovery You may find that your vehicle’s right wheels havedropped off the edge of a road onto the shoulderwhile you are driving. If the level of the shoulder is only slightly below thepavement, recovery should be fairly easy. Ease offthe accelerator and then, if there is nothing in theway,...

Loss of Control Let us review what driving experts say about whathappens when the three control systems — brakes,steering, and acceleration — do not have enoughfriction where the tires meet the road to do what thedriver has asked. In any emergency, do not give up. Keep trying tosteer and constantly ...

While driving on a surface with reduced traction, tryyour best to avoid sudden steering, acceleration, orbraking, including reducing vehicle speed byshifting to a lower gear. Any sudden changes couldcause the tires to slide. You may not realize thesurface is slippery until your vehicle is skidding.L...

Driving in Rain and on Wet Roads Rain and wet roads can mean driving trouble. On awet road, you cannot stop, accelerate, or turn aswell because your tire-to-road traction is not asgood as on dry roads. And, if your tires do not havemuch tread left, you will get even less traction. It is always wise ...

{ CAUTION: Wet brakes can cause accidents. Theymay not work as well in a quick stop andmay cause pulling to one side. You couldlose control of the vehicle. After driving through a large puddle ofwater or a car wash, apply the brake pedallightly until the brakes work normally. Driving too fast throug...

Driving Through Deep Standing Water Notice: If you drive too quickly through deep puddles or standing water, water can come inthrough the engine’s air intake and badlydamage the engine. Never drive through waterthat is slightly lower than the underbody of yourvehicle. If you cannot avoid deep puddle...

City Driving One of the biggest problems with city streets isthe amount of traffic on them. You will wantto watch out for what the other drivers are doingand pay attention to traffic signals. Here are ways to increase your safety in citydriving: • Know the best way to get to where you aregoing. Get ...

Freeway Driving Mile for mile, freeways — also called thruways,parkways, expressways, turnpikes, orsuperhighways — are the safest of all roads. Butthey have their own special rules. The most important advice on freeway driving is:Keep up with traffic and keep to the right.Drive at the same speed mos...

Before changing lanes, check your mirrors.Then use your turn signal. Just before you leave the lane, glance quicklyover your shoulder to make sure there is notanother vehicle in your blind spot. Once you are moving on the freeway, makecertain you allow a reasonable following distance. Expect to move...

Here are some things you can check before a trip: • Windshield Washer Fluid: Is the reservoir full? Are all windows clean inside and outside? • Wiper Blades: Are they in good shape? • Fuel, Engine Oil, Other Fluids: Have you checked all levels? • Lamps: Are they all working? Are the lenses clean? • ...

Hill and Mountain Roads Driving on steep hills or mountains is differentfrom driving in flat or rolling terrain. If you drive regularly in steep country, or if you areplanning to visit there, here are some tips thatcan make your trips safer and more enjoyable. • Keep your vehicle in good shape. Chec...

Winter Driving Here are some tips for winter driving: • Have your vehicle in good shape for winter. • You may want to put winter emergencysupplies in your trunk. Also see Tires on page 421 . Include an ice scraper, a small brush or broom, asupply of windshield washer fluid, a rag, somewinter outer c...

Driving on Snow or Ice Most of the time, those places where the tiresmeet the road probably have good traction. However, if there is snow or ice between the tiresand the road, you can have a very slipperysituation. You will have a lot less traction, or grip,and will need to be very careful. What is ...

The Anti-Lock Brake System (ABS) improves yourvehicle’s stability when you make a hard stopon a slippery road. Even though you have ABS,you will want to begin stopping sooner thanyou would on dry pavement. See Anti-Lock Brake System (ABS) on page 321 . • Allow greater following distance on anyslippe...

You will need a well-charged battery to restart thevehicle, and possibly for signaling later on withyour headlamps. Let the heater run for a while. Then, shut the engine off and close the windowalmost all the way to preserve the heat. Startthe engine again and repeat this only when youfeel really un...

Rocking Your Vehicle to Get It Out First, turn the steering wheel left and right.That will clear the area around the front wheels.You should turn the traction control systemoff. See Traction Control System (TCS) on page 323 . Then shift back and forth between REVERSE (R) and a forward gear, spinning...

Tire and Loading Information Label A vehicle specific Tire and Loading Informationlabel is attached to the vehicle’s center pillar(B-pillar). With the driver’s door open, you will findthe label attached below the door lock post (striker).The Tire and Loading Information label shows thenumber of occu...

Item Description Total A Vehicle CapacityWeight for Example 3 = 1,000 lbs (453 kg) B Subtract OccupantWeight 200 lbs(91 kg) × 5 = 1,000 lbs (453 kg) C Available CargoWeight = 0 lbs (0 kg) Refer to your vehicle’s Tire and LoadingInformation label for specific information aboutyour vehicle’s capacity ...

The GVWR includes the weight of the vehicle, alloccupants, fuel, and cargo. The Certificationlabel also shows the maximum weights for thefront and rear axles, called the Gross Axle WeightRating (GAWR). Never exceed the GVWR orthe GAWR for either the front or rear axle. { CAUTION: Do not load your ve...

Towing Towing Your Vehicle Consult your dealer or a professional towingservice if you need to have your disabled vehicletowed. See Roadside Service on page 531 . If you want to tow your vehicle behind anothervehicle for recreational purposes (such as behinda motorhome), see Recreational Vehicle Towi...

Dinghy Towing Notice: If you tow your vehicle with all four wheels on the ground, the drivetraincomponents could be damaged. The repairswould not be covered by your warranty. Do nottow your vehicle with all four wheels on theground. Your vehicle was not designed to be towed withall four wheels on th...

3. Set the parking brake and then remove the key. 4. Clamp the steering wheel in a straight-ahead position with a clamping device designed fortowing. 5. Release the parking brake. Dolly Towing (STS-V) Notice: Dolly towing or dinghy towing your vehicle may cause damage because of reducedground cleara...

Tires ............................................................ 421 Winter Tires .............................................. 422Tire Sidewall Labeling ............................... 423Tire Terminology and Definitions ............... 426Run-Flat Tires (STS-V) .............................. 42...

Vehicle Identification .................................. 485 Vehicle Identification Number (VIN) ........... 485Service Parts Identification Label ............... 485 Electrical System ........................................ 486 Add-On Electrical Equipment ..................... 486Headlamp Wiring ...

Service Your dealer knows your vehicle best and wantsyou to be happy with it. We hope you will goto your dealer for all your service needs. You willget genuine GM parts and GM-trained andsupported service people. We hope you will want to keep your GM vehicle allGM. Genuine GM parts have one of these...

Doing Your Own Service Work { CAUTION: You can be injured and your vehicle couldbe damaged if you try to do service workon a vehicle without knowing enoughabout it. • Be sure you have sufficient knowledge,experience, the proper replacementparts, and tools before you attempt anyvehicle maintenance ta...

Adding Equipment to the Outsideof Your Vehicle Things you might add to the outside of yourvehicle can affect the airflow around it. This maycause wind noise and affect windshield washerperformance. Check with your dealer beforeadding equipment to the outside of your vehicle. Fuel Use of the recommen...

If the octane is less than 87, you may notice aheavy knocking noise when you drive. If this occurs,use a gasoline rated at 87 octane or higher as soonas possible. Otherwise, you might damage yourengine. If you are using gasoline rated at 87 octaneor higher and you hear heavy knocking, your enginenee...

The malfunction indicator lamp may turn on andyour vehicle may fail a smog-check test. See Malfunction Indicator Lamp on page 252 . If this occurs, return to your authorized GM dealer fordiagnosis. If it is determined that the condition iscaused by the type of fuel used, repairs may not becovered by...

The tethered fuel capis located behind ahinged fuel door on thepassenger’s side ofthe vehicle. To open the fuel door, apply pressure in thecenter of the rear edge of the fuel door and it willpop open. To remove the fuel cap, turn it slowlycounterclockwise. The fuel cap has a spring in it;if the cap ...

When replacing the fuel cap, turn it clockwise untilit clicks. Make sure the cap is fully installed.The diagnostic system can determine if the fuelcap has been left off or improperly installed.This would allow fuel to evaporate into theatmosphere. See Malfunction Indicator Lamp on page 252 . The CHE...

Filling a Portable Fuel Container { CAUTION: Never fill a portable fuel container while itis in your vehicle. Static electricitydischarge from the container can ignite thegasoline vapor. You can be badly burnedand your vehicle damaged if this occurs.To help avoid injury to you and others: • Dispense...

Checking Things Underthe Hood { CAUTION: An electric fan under the hood can start upand injure you even when the engine is notrunning. Keep hands, clothing, and toolsaway from any underhood electric fan. { CAUTION: Things that burn can get on hot engineparts and start a fire. These includeliquids li...

2. Then go to the front of the vehicle and find the secondary hood release lever. The leveris located under the front edge of thegrille near the center. Move the release leverto the side and raise the hood. Before closing the hood, be sure all the filler capsare on properly. Then pull the hood down ...

Engine Oil Checking Engine Oil It is a good idea to check the engine oil every timeyou get fuel. In order to get an accurate reading,the oil must be warm and the vehicle must beon level ground. The engine oil dipstick handle is a yellow loop.See Engine Compartment Overview on page 373 for the locati...

If the oil is below the cross-hatched area at thetip of the dipstick, you need to add at leastone quart/liter of oil. But you must use the rightkind. This section explains what kind of oil to use.For engine oil crankcase capacity, see Capacities and Specifications on page 498 . Notice: Do not add to...

What Kind of Engine Oil to Use • GM4718M Your vehicle’s engine requires a special oilmeeting GM Standard GM4718M. Oils meetingthis standard may be identified as synthetic.However, not all synthetic oils will meetthis GM standard. Look for and use only an oilthat meets GM Standard GM4718M. Notice: If...

Your vehicle’s engine is filled at the factory with aMobil 1 ® synthetic oil, which meets all requirements for your vehicle. Substitute Engine Oil: When adding oil to maintainengine oil level, oil meeting GM StandardGM4718M may not be available. You can addsubstitute oil designated SAE 5W-30 withthe...

What to Do with Used Oil Used engine oil contains certain elements that maybe unhealthy for your skin and could even causecancer. Do not let used oil stay on your skin for verylong. Clean your skin and nails with soap andwater, or a good hand cleaner. Wash or properlydispose of clothing or rags cont...

Engine Air Cleaner/Filter The engine air cleaner/filter is in the enginecompartment on the driver’s side of the vehicle,near the front. See Engine Compartment Overview on page 373 for more information on locating the air cleaner/filter. When to Inspect the Engine AirCleaner/Filter Inspect the air cl...

3. Loosen the clamp and remove the duct from the passenger’s side of the engine aircleaner/filter. 4. The two sides of the airbox are hinged at the bottom. Open the airbox by pushing the top ofthe airbox cover toward the engine. 5. Remove the air filter by lifting it straight up through the opening ...

Automatic Transmission Fluid How to Check AutomaticTransmission Fluid It is not necessary to check the transmission fluidlevel. A transmission fluid leak is the onlyreason for fluid loss. If a leak occurs, take thevehicle to the dealership service department andhave it repaired as soon as possible. ...

Engine Coolant The cooling system in your vehicle is filled withDEX-COOL ® engine coolant. This coolant is designed to remain in your vehicle for five years or150,000 miles (240 000 km), whichever occursfirst, if you add only DEX-COOL ® extended life coolant. The following explains your cooling syst...

What to Use Use a mixture of one-half clean, drinkable waterand one-half DEX-COOL ® coolant which will not damage aluminum parts. If you use this coolantmixture, you do not need to add anything else. { CAUTION: Adding only plain water to your coolingsystem can be dangerous. Plain water, orsome other...

Checking Coolant The coolant surge tank and pressure cap arelocated on the driver’s side of the vehicle, towardthe rear of the engine compartment. See Engine Compartment Overview on page 373 for more information on location. { CAUTION: Turning the surge tank pressure cap whenthe engine and radiator ...

Checking Intercooler System Coolant(4.4L V8 STS-V Engine Only) See Engine Compartment Overview on page 373 for the location of the intercooler systempressure cap. Notice: This vehicle has a specific coolant fill procedure. Failure to follow this procedurecould cause your engine to overheat andbe sev...

{ CAUTION: You can be burned if you spill coolant onhot engine parts. Coolant containsethylene glycol, and it will burn if theengine parts are hot enough. Do not spillcoolant on a hot engine. When replacing a pressure cap, make sure it ishand-tight and fully seated. Coolant Surge Tank Pressure Cap N...

If Steam Is Coming From Your Engine { CAUTION: Steam from an overheated engine canburn you badly, even if you just open thehood. Stay away from the engine if yousee or hear steam coming from it. Turn itoff and get everyone away from thevehicle until it cools down. Wait untilthere is no sign of steam...

If you get the overheat warning with no sign ofsteam, try this for a minute or so: 1. In heavy traffic, let the engine idle in NEUTRAL (N) while stopped. If it is safe to doso, pull off the road, shift to PARK (P) orNEUTRAL (N) and let the engine idle. 2. Set the climate controls to the highest heat...

Cooling System When you decide it is safe to lift the hood, this iswhat you will see: A. Engine Cooling Fans B. Coolant Surge Tank and Pressure Cap Some vehicles may have an engine driven fan, aswell as the electric pusher fans which arelocated behind the vehicle’s grille. { CAUTION: An electric eng...

{ CAUTION: Heater and radiator hoses, and otherengine parts, can be very hot. Do nottouch them. If you do, you can be burned. Do not run the engine if there is a leak. Ifyou run the engine, it could lose allcoolant. That could cause an engine fire,and you could be burned. Get any leakfixed before yo...

Notice: In cold weather, water can freeze and crack the engine, radiator, heater core andother parts. Use the recommended coolant andthe proper coolant mixture. { CAUTION: You can be burned if you spill coolant onhot engine parts. Coolant containsethylene glycol and it will burn if theengine parts a...

3. Fill the coolant surge tank with the proper DEX-COOL ® coolant mixture, to slightly above the FULL COLD/FROID line on theside of the coolant surge tank. 4. With the coolant surge tank pressure cap off, start the engine and let it run until you canfeel the upper radiator hose getting hot. Theupper...

Power Steering Fluid See Engine Compartment Overviewon page 373 for reservoir location. When to Check Power Steering Fluid It is not necessary to regularly check powersteering fluid unless you suspect there is a leak inthe system or you hear an unusual noise. Afluid loss in this system could indicat...

Windshield Washer Fluid What to Use When you need windshield washer fluid, be sureto read the manufacturer’s instructions beforeuse. If you will be operating your vehicle in an areawhere the temperature may fall below freezing,use a fluid that has sufficient protection againstfreezing. Adding Washer...

Brakes Brake Fluid Your brake mastercylinder reservoir isfilled with DOT-3 brakefluid. See Engine Compartment Overviewon page 373 for reservoir locationand access. There are only two reasons why the brake fluidlevel in the reservoir might go down. The firstis that the brake fluid goes down to an acc...

What to Add When you do need brake fluid, DOT-3 brake fluidis recommended for use. DOT-4 brake fluid isalso compatible with your vehicle’s brake systemparts. However, if you choose to use DOT-4fluid, it is recommended that you flush your brakehydraulic system and refill it with new DOT-4fluid at a r...

{ CAUTION: The brake wear warning sound means thatsoon the brakes will not work well. Thatcould lead to an accident. When you hearthe brake wear warning sound, have yourvehicle serviced. Notice: Continuing to drive with worn-out brake pads could result in costly brake repair. Some driving conditions...

Battery Your vehicle has a maintenance free battery.When it is time for a new battery, get one that hasthe replacement number shown on the originalbattery’s label. We recommend an ACDelco ® replacement battery. See Engine Compartment Overview on page 373 for battery location and access. Warning: Bat...

{ CAUTION: Batteries can hurt you. They can bedangerous because: • They contain acid that can burn you. • They contain gas that can explodeor ignite. • They contain enough electricity toburn you. If you do not follow these steps exactly,some or all of these things can hurt you. Notice: Ignoring thes...

Notice: If you leave your radio or other accessories on during the jump startingprocedure, they could be damaged. The repairswould not be covered by your warranty.Always turn off your radio and otheraccessories when jump starting your vehicle. 3. Turn off the ignition on both vehicles. Unplug unnece...

It is located between the battery and theunderhood fuse block. You should always usethis remote ground location, instead of theterminal on the battery. Notice: If you connect a negative cable to the ECM, ECM mounting bracket, or any cablesthat attach to the ECM bracket, you maydamage the ECM. Always...

Notice: If the jumper cables are connected or removed in the wrong order, electrical shortingmay occur and damage the vehicle. The repairswould not be covered by your warranty. Alwaysconnect and remove the jumper cables in thecorrect order, making sure that the cables donot touch each other or other...

Transfer Case When to Check Lubricant It is not necessary to regularly check the transfercase fluid unless you suspect there is a leakor you hear an unusual noise. A fluid loss couldindicate a problem. Have it inspected and repaired. How to Check Lubricant A. Drain Plug B. Fill Plug To get an accura...

Rear Axle When to Check Lubricant It is not necessary to regularly check rear axlefluid unless you suspect there is a leak or you hearan unusual noise. A fluid loss could indicate aproblem. Have it inspected and repaired. How to Check Lubricant To get an accurate reading, the vehicle should beon a l...

Front Axle When to Check and Change Lubricant It is not necessary to regularly check the front axlefluid unless you suspect there is a leak or youhear an unusual noise. A fluid loss could indicatea problem. Have it inspected and repaired. How to Check Lubricant A. Drain Plug B. Filler Plug To get an...

High Intensity Discharge (HID)Lighting { CAUTION: The low beam high intensity dischargelighting system operates at a very highvoltage. If you try to service any of thesystem components, you could beseriously injured. Have your dealer or aqualified technician service them. Your vehicle has HID headla...

2. Pull out the push pins holding down the top portion of the cloth cover. 3. Fold the cover down slightly and locate the lamp assembly. 4. Turn the socket counterclockwise and pull it straight out to remove it from the lampassembly. 5. Pull the old bulb straight out and reinstall the new bulb. 6. R...

Tires Your new vehicle comes with high-quality tiresmade by a leading tire manufacturer. If you everhave questions about your tire warranty and whereto obtain service, see your GM Warranty booklet fordetails. For additional information refer to the tiremanufacturer’s booklet included with your vehic...

Low-Profile Performance Tires If your vehicle has 255/45ZR18, P255/45R18 orP275/40R19 100Y size tires, they are classified aslow-profile performance tires. These tires aredesigned for very responsive driving on wet or drypavement. You may also notice more road noisewith low-profile performance tires...

Tire Sidewall Labeling Useful information about a tire is molded into itssidewall. The examples below show a typicalpassenger vehicle tire and a compact spare tiresidewall. (A) Tire Size: The tire size is a combination of letters and numbers used to define a particulartire’s width, height, aspect ra...

(B) Tire Ply Material: The type of cord and number of plies in the sidewall and under the tread. (C) Tire Identification Number (TIN): The letters and numbers following the DOT (Department ofTransportation) code is the Tire IdentificationNumber (TIN). The TIN shows the manufacturerand plant code, ti...

(C) Aspect Ratio: A two-digit number that indicates the tire height-to-width measurements.For example, if the tire size aspect ratio is60, as shown in item C of the illustration, it wouldmean that the tire’s sidewall is 60 percent ashigh as it is wide. (D) Construction Code: A letter code is used to...

Cold Tire Pressure: The amount of air pressure in a tire, measured in pounds per square inch(psi) or kilopascals (kPa) before a tire has built upheat from driving. See Inflation - Tire Pressure on page 431 . Curb Weight: This means the weight of a motor vehicle with standard and optional equipmentin...

Maximum Loaded Vehicle Weight: The sum of curb weight, accessory weight, vehicle capacityweight, and production options weight. Normal Occupant Weight: The number of occupants a vehicle is designed to seat multipliedby 150 lbs (68 kg). See Loading Your Vehicle on page 349 . Occupant Distribution: De...

Treadwear Indicators: Narrow bands, sometimes called wear bars, that show across the tread of atire when only 1/16 inch (1.6 mm) of tread remains.See When It Is Time for New Tires on page 440 . UTQGS (Uniform Tire Quality GradingStandards): A tire information system that provides consumers with rati...

If a tire goes flat, you will not need to stop on theside of the road to change the tire. You canjust keep on driving. The vehicle’s run-flat tirescan operate effectively with no air pressure for upto 50 miles (80 km) at speeds up to 55 mph(90 km/h). The shorter the distance you drive andthe slower ...

Inflation - Tire Pressure Tires need the correct amount of air pressure tooperate effectively. Notice: Do not let anyone tell you that under-inflation or over-inflation is all right. It isnot. If your tires do not have enough air(under-inflation), you can get the following: • Too much flexing • Too ...

How to Check Use a good quality pocket-type gage to check tirepressure. You cannot tell if your tires areproperly inflated simply by looking at them. Radialtires may look properly inflated even when theyare underinflated. Check the tire’s inflationpressure when the tires are cold. Cold means yourveh...

If you will be driving at high speeds, speeds of100 mph (160 km/h) or higher, where it is legal, setthe cold inflation pressure to the maximum inflationpressure shown on the tire sidewall, or 38 psi(265 kPa), whichever is lower. See the examplefollowing. When you end this high-speed driving,return t...

Your vehicle has also been equipped with a TPMSmalfunction indicator to indicate when thesystem is not operating properly. The TPMSmalfunction indicator is combined with the low tirepressure telltale. When the system detects amalfunction, the telltale will flash for approximatelyone minute and then ...

TPMS Sensor Identification Codes Each TPMS sensor has a unique identificationcode. Any time you replace one or more ofthe TPMS sensors or rotate your vehicle’s tires,the identification codes will need to be matched tothe new tire/wheel position. The sensors arematched to the tire/wheel positions in ...

This device complies with RSS-210 of IndustryCanada. Operation is subject to the followingtwo conditions: 1. This device may not cause interference. 2. This device must accept any interference received, including interference that maycause undesired operation of the device. Changes or modifications ...

When It Is Time for New Tires One way to tell when itis time for new tires isto check the treadwearindicators, which willappear when your tireshave only 1/16 inch(1.6 mm) or less of treadremaining. You need a new tire if any of the followingstatements are true: • You can see the indicators at three ...

Buying New Tires GM has developed and matched specific tires foryour vehicle. The original equipment tiresinstalled on your vehicle, when it was new, weredesigned to meet General Motors TirePerformance Criteria Specification (TPC Spec)system rating. If you need replacement tires, GMstrongly recommen...

Your vehicle’s original equipment tires are listedon the Tire and Loading Information label.This label is attached to the vehicle’s center pillar(B-pillar). See Loading Your Vehicle on page 349 , for more information about the Tire and LoadingInformation label and its location on your vehicle. Vehic...

Uniform Tire Quality Grading Quality grades can be found where applicable onthe tire sidewall between tread shoulder andmaximum section width. For example: Treadwear 200 Traction AA Temperature A The following information relates to the systemdeveloped by the United States National HighwayTraffic Sa...

Temperature – A, B, C The temperature grades are A (the highest),B, and C, representing the tire’s resistance to thegeneration of heat and its ability to dissipateheat when tested under controlled conditions on aspecified indoor laboratory test wheel. Sustainedhigh temperature can cause the material...

Each new wheel should have the sameload-carrying capacity, diameter, width, offset andbe mounted the same way as the one itreplaces. If you need to replace any of your wheels, wheelbolts, or wheel nuts, replace them only withnew GM original equipment parts. This way, youwill be sure to have the righ...

Tire Chains { CAUTION: If your vehicle has P255/45R17,P255/45R18, P275/40R19, or 255/45ZR18size tires, do not use tire chains, as thereis not enough clearance. Tire chains used on a vehicle without theproper amount of clearance can causedamage to the brakes, suspension, orother vehicle parts. The ar...

Lifting Your Vehicle (STS-V) { CAUTION: Lifting a vehicle can cause an injury. Thevehicle can slip off the jack and roll overyou or other people. You and they couldbe badly injured. Find a level place to liftyour vehicle. To help prevent the vehiclefrom moving: 1. Hold the brake pedal down with your...

Lifting From the Front The front lifting points can be accessed fromeither side of your vehicle, behind the front tires. 1. Locate the front lifting points using the diagram above. The front lifting locationis about 15 inches (37 cm) from the rear edgeof the front wheel well. 2. Be sure to place a b...

If a Tire Goes Flat It is unusual for a tire to blowout while you aredriving, especially if you maintain your tiresproperly. See Tires on page 421 . If air goes out of a tire, It is much more likely to leak out slowly.But if you should ever have a blowout, here are afew tips about what to expect and...

Run-Flat Tires (STS-V) If your vehicle has run-flat tires, there is no sparetire and no tire changing equipment. Run-flattires can operate effectively with no air pressurefor a limited distance and speed. These tiresperform so well without any air pressure that a TirePressure Monitor (TPM) is used t...

Accessing the Tire Inflator Kit To access the tire inflator kit, do the following: 1. Open the trunk. See Trunk on page 101 for more information. 2. Locate the tire inflator kit on the driver’s side of the vehicle, near the back corner of the trunk. 3. Remove the tire inflator kit strapby squeezing ...

{ CAUTION: Inflating something too much can make itexplode, and you or others could beinjured. Be sure to read the inflatorinstructions, and inflate the tire to itsrecommended pressure. Do not exceed36 psi (248 kPa). 7. Move the inflator kit switch to the I (on) position. The inflator kit will force...

9. Inflate the tire up to the recommended inflation pressure, found on the Tire andLoading Information label located onthe vehicle’s center pillar (B-pillar) below thevehicle’s door latch, using the air pressuregage on the top of the unit. The pressure gage reading is slightly highwhile the compress...

18. Immediately drive the vehicle 5 miles (8 km) to distribute the sealant evenly in the tire.Stop at a safe location and check thetire pressure, refer to Steps 1 through 8 under“Using the Air Compressor without Sealant”next in this section. If the tire pressurehas fallen more then 10 psi (68 kPa), ...

Changing a Flat Tire If you have an STS-V model, there is no spare tireand no tire changing equipment. Your vehicle isequipped with run-flat tires. See Run-Flat Tires (STS-V) on page 429 for more information. If you have an STS model, your vehicle may beequipped with a tire inflator kit. See Tire In...

When your vehicle has a flat tire, use the followingexample as a guide to assist you in the placementof wheel blocks. The following information will tell you next how touse the jack and change a tire. Removing the Spare Tire and Tools The equipment you will need is located in thetrunk. To gain acces...

2. Find the vehicle’s jacking location using the diagram above and corresponding hoistingnotches located in the plastic molding on thevehicle’s frame. The notches in the plasticmolding are marked with a triangle shape tohelp you find them. 3. Attach the wheel wrench to the jack. { CAUTION: Getting u...

{ CAUTION: Lifting a vehicle and getting under it to domaintenance or repairs is dangerouswithout the appropriate safety equipmentand training. The jack provided with yourvehicle is designed only for changing aflat tire. If it is used for anything else, youor others could be badly injured or killedi...

{ CAUTION: Incorrect wheel nuts or improperlytightened wheel nuts can cause the wheelto come loose and even come off. Thiscould lead to an accident. Be sure to usethe correct wheel nuts. If you have toreplace them, be sure to get new GMoriginal equipment wheel nuts. Stopsomewhere as soon as you can ...

Storing a Flat or Spare Tireand Tools { CAUTION: Storing a jack, a tire, or other equipmentin the passenger compartment of thevehicle could cause injury. In a suddenstop or collision, loose equipment couldstrike someone. Store all these in theproper place. Full-Size Tire and Tools After you have put...

Compact Spare Tire and Tools Use the following diagram as a guide for storingthe compact spare tire and tools in the trunk: A. Compact Spare Tire Cover B. Plastic Wing NutC. RetainerD. Jack Container Package (WithWheel Wrenchand Jack) E. Compact Spare Tire F. Foam SupportG. Bolt 1. Open the trunk. S...

Compact Spare Tire Although the compact spare tire was fully inflatedwhen the vehicle was new, it can lose air aftera time. Check the inflation pressure regularly. Itshould be 60 psi (420 kPa). After installing the compact spare on the vehicle,you should stop as soon as possible and makesure the spa...

Appearance Care Cleaning the Inside of Your Vehicle Your vehicle’s interior will continue to look itsbest if it is cleaned often. Although not alwaysvisible, dust and dirt can accumulate on yourupholstery. Dirt can damage carpet, fabric, leather,and plastic surfaces. Regular vacuuming isrecommended ...

4. Continue to gently rub the soiled area until the cleaning cloth remains clean. 5. If the soil is not completely removed, use a mild soap solution and repeat the cleaningprocess that was used with plain water. If any of the soil remains, a commercial fabriccleaner or spot lifter may be necessary. ...

Instrument Panel, Vinyl, and OtherPlastic Surfaces A soft cloth dampened with water may be used toremove dust. If a more thorough cleaning isnecessary, a clean soft cloth dampened with amild soap solution can be used to gently removedust and dirt. Never use spot lifters or removerson plastic surface...

Weatherstrips Silicone grease on weatherstrips will make themlast longer, seal better, and not stick or squeak.Apply silicone grease with a clean cloth. Duringvery cold, damp weather frequent application maybe required. See Recommended Fluids and Lubricants on page 516 . Washing Your Vehicle The pai...

Finish Care Occasional waxing or mild polishing of the vehicleby hand may be necessary to remove residuefrom the paint finish. Approved cleaning productscan be obtained from your dealer. See Vehicle Care/Appearance Materials on page 484 . Notice: Machine compounding or aggressive polishing on a base...

Aluminum or Chrome-Plated Wheels Your vehicle may have either aluminum orchrome-plated wheels. Keep the wheels clean using a soft clean clothwith mild soap and water. Rinse with clean water.After rinsing thoroughly, dry with a soft cleantowel. A wax may then be applied. Notice: If you use strong soa...

Tires To clean the tires, use a stiff brush with tire cleaner. Notice: Using petroleum-based tire dressing products on your vehicle may damage thepaint finish and/or tires. When applying a tiredressing, always wipe off any oversprayfrom all painted surfaces on your vehicle. Sheet Metal Damage If the...

Vehicle Identification Vehicle Identification Number (VIN) This is the legal identifier for your vehicle. Itappears on a plate in the front corner of theinstrument panel, on the driver side. You can seeit if you look through the windshield from outsideyour vehicle. The VIN also appears on the Vehicl...

Electrical System Add-On Electrical Equipment Notice: Do not add anything electrical to your vehicle unless you check with your dealerfirst. Some electrical equipment can damageyour vehicle and the damage would notbe covered by your warranty. Some add-onelectrical equipment can keep othercomponents ...

Power Windows and Other PowerOptions Circuit breakers protect the power windows andpower seats. When the current load is tooheavy, the circuit breaker opens and closes,protecting the circuit until the problem is fixed orgoes away. Fuses and Circuit Breakers The wiring circuits in your vehicle are pr...

Rear Underseat Fuse Block Removing the Rear Seat Cushion Notice: If you touch the exposed wires with the metal on the seat cushion, you could causea short that could damage the battery and orwires. Avoid contact between the rear seat andthe fuse center whenever you remove orreinstall the rear seat. ...

Driver’s Side Your vehicle may not have all the fuses listed below. Fuses Usage AMP Amplifier INTERCOOLER PUMP (OPT) Intercooler Pump (Option) THEFT/ SHIFTER Theft Sensors, Auto Shifter, PowerSounder MR-RTD MOD (OPT) Magnetic Ride Control Module(Option) REAR DR MOD Rear Door Modules ELC SOL (OPT) Au...

Passenger’s Side Fuses Usage SPARE Spare CANISTER VENT Canister Vent Solenoid RT TURN-RIM Right Turn Signal SUNROOF (OPT) Sunroof Module (Option) STOP LAMPS Stoplamps FUEL PUMP Fuel Pump RF HTD ST/S-BAND Front Passenger Heated Seat,S-Band™ Antenna RADIO/ ONSTAR Radio/OnStar ® AIR BAG Airbags Fuses U...

Application Capacities English Metric Transmission (Pan Removal and Filter Replacement) 5-Speed Automatic 7.4 qt 7.0 L 6-Speed Automatic 7.3 qt 6.9 L 6-Speed Automatic (V-Series) 6.5 qt 6.2 L Wheel Nut Torque 100 lb ft 140 Y All capacities are approximate. When adding, be sure to fill to the approxi...

Maintenance Schedule ................................ 502 Introduction ............................................... 502Maintenance Requirements ........................ 502Your Vehicle and the Environment ............ 503Using the Maintenance Schedule ............... 503Scheduled Maintenance .......

Maintenance Schedule Introduction Important: Keep engine oil at the proper leveland change as recommended. Have you purchased the GM Protection Plan? ThePlan supplements your new vehicle warranties.See your Warranty and Owner Assistance bookletor your dealer for details. Maintenance Requirements Not...

This schedule is for vehicles that: • carry passengers and cargo withinrecommended limits. You will find these limitson the Tire and Loading Information label.See Loading Your Vehicle on page 349 . • are driven on reasonable road surfaces withinlegal driving limits. • use the recommended fuel. See G...

If you want to purchase service information, see Service Publications Ordering Information onpage 543 . Owner Checks and Services on page 512 tells you what should be checked, when to check it, andwhat you can easily do to help keep your vehicle ingood condition. The proper replacement parts, fluids...

If the engine oil life system is ever resetaccidentally, you must service your vehicle within3,000 miles (5 000 km) since your last service.Remember to reset the oil life system wheneverthe oil is changed. See Engine Oil Life System on page 383 for information on the Engine Oil Life System and reset...

Additional Required Services The following services should be performed at the first maintenance service ( I or II ) after the indicated miles (kilometers) shown for each item. Additional Required Services Service and Miles (Kilometers) 25,000 (40 000) 50,000 (80 000) 75,000 (120 000) 100,000 (160 0...

Maintenance Footnotes † The U.S. Environmental Protection Agency or the California Air Resources Board has determinedthat the failure to perform this maintenance itemwill not nullify the emission warranty or limitrecall liability prior to the completion of thevehicle’s useful life. We, however, urge...

(f) Lubricate all key lock cylinders. Lubricate all hinges and latches, including those for the hood,rear compartment, glove box door, and consoledoor. More frequent lubrication may be requiredwhen exposed to a corrosive environment.Applying silicone grease on weatherstrips with aclean cloth will ma...

(n) Visually inspect belt for fraying, excessive cracks, or obvious damage. Replace belt ifnecessary. (o) Drain, flush, and refill intercooler system. This service can be complex; you should have yourdealer perform this service. See Engine Coolant onpage 389 (p) For supercharged engines only: Have y...

At Each Fuel Fill It is important to perform these underhood checksat each fuel fill. Engine Oil Level Check Check the engine oil level and add the proper oilif necessary. See Engine Oil on page 380 for further details. Notice: It is important to check the engine oil regularly and keep it at the pro...

At Least Once a Year Starter Switch Check { CAUTION: When you are doing this inspection, thevehicle could move suddenly. If the vehiclemoves, you or others could be injured. 1. Before you start, be sure you have enough room around the vehicle. 2. Firmly apply both the parking brake and the regular b...

Parking Brake and AutomaticTransmission Park (P) Mechanism Check { CAUTION: When you are doing this check, yourvehicle could begin to move. You orothers could be injured and propertycould be damaged. Make sure there isroom in front of your vehicle in case itbegins to roll. Be ready to apply theregul...

Normal Maintenance Replacement Parts Replacement parts identified below by name, part number, or specification can be obtained from yourGM dealer. Part GM Part Number ACDelco ® Part Number Engine Air Cleaner/Filter Element 3.6L V6 and 4.6L V8 25735595 A2944C 4.4L V8 (V-Series) 15813300 A3078C Engine...

Engine Drive Belt Routing 3.6L V6 Engine 4.4L V8 Engine 519

Maintenance Record After the scheduled services are performed, record the date, odometer reading, who performed the service,and the type of services performed in the boxes provided. See Maintenance Requirements on page 502 . Any additional information from Owner Checks and Services on page 512 can b...

Customer Assistance and Information ....... 526 Customer Satisfaction Procedure ............... 526Online Owner Center ................................. 528Customer Assistance for Text Telephone (TTY) Users ........................................... 529 Customer Assistance Offices ....................

Customer Assistance andInformation Customer Satisfaction Procedure Your satisfaction and goodwill are importantto your dealer and to Cadillac. Normally, anyconcerns with the sales transaction or theoperation of your vehicle will be resolved by yourdealer’s sales or service departments. Sometimes,how...

STEP THREE: Both General Motors and your dealer are committed to making sure you arecompletely satisfied with your new vehicle.However, if you continue to remain unsatisfiedafter following the procedure outlined in Steps Oneand Two, you should file with the BBB Auto LineProgram to enforce any additi...

Online Owner Center Online Owner Center(United States only) The Owner Center is a resource for your GMownership needs. Specific vehicle information canbe found in one place. The Online Owner Center allows you to: • Get e-mail service reminders. • Access information about your specificvehicle, includ...

Customer Assistance for TextTelephone (TTY) Users To assist customers who are deaf, hard ofhearing, or speech-impaired and who use TextTelephones (TTYs), Cadillac has TTY equipmentavailable at its Customer Assistance Center.Any TTY user can communicate with Cadillac bydialing: 1-800-833-CMCC (2622)....

Overseas — Customer Assistance Please contact the local General MotorsBusiness Unit. Mexico, Central America andCaribbean Islands/Countries(Except Puerto Rico and U.S. VirginIslands) — Customer Assistance General Motors de Mexico, S. de R.L. de C.V.Customer Assistance CenterPaseo de la Reforma # 274...

Roadside Service In the United States or Canada, call 1-800-882-1112 . Service is available 24 hours a day, 365 days a year. Who Is Covered? Roadside Assistance coverage is for the vehicleoperator, regardless of ownership. A person drivingthis vehicle without the consent of the owner isnot eligible ...

• Lock Out Assistance: To ensure security, the driver must present the vehicle registrationand personal ID before lock-out service isprovided. Lock-out service will be covered atno charge if you are unable to gain entryinto your vehicle. If your vehicle will not start,Roadside Service will arrange t...

Cadillac Technician Roadside Service(U.S. only) Cadillac’s exceptional Roadside Service is morethan an auto club or towing service. It providesevery Cadillac owner in the United States with theadvantage of contacting a Cadillac advisor and,where available, a Cadillac trained dealertechnician who can...

Cadillac and General Motors of Canada Limitedreserve the right to limit services or reimbursementto an owner or driver when, in their solediscretion, the claims become excessive infrequency or type of occurrence. Roadside Service is not part of or included in thecoverage provided by the New Vehicle ...

Transportation Options Warranty service can generally be completedwhile you wait. However, if you are unable to wait,GM helps to minimize your inconvenience byproviding several transportation options.Depending on the circumstances, your dealer canoffer you one of the following: Shuttle Service Parti...

Courtesy Transportation is available only atparticipating dealers and all program options, suchas shuttle service, may not be available atevery dealer. Please contact your dealer forspecific information about availability. All CourtesyTransportation arrangements will be administeredby appropriate de...

Collision Damage Repair If your vehicle is involved in a collision and it isdamaged, have the damage repaired by a qualifiedtechnician using the proper equipment andquality replacement parts. Poorly performedcollision repairs will diminish your vehicle’s resalevalue, and safety performance can becom...

Reporting Safety Defects Reporting Safety Defects to theUnited States Government If you believe that your vehicle has a defect whichcould cause a crash or could cause injury ordeath, you should immediately inform the NationalHighway Traffic Safety Administration (NHTSA),in addition to notifying Gene...

Windows ..................................................... 104 Power ...................................................... 105 Windshield Rainsense™ II Wipers ............................. 190Replacement ............................................ 419Washer ........................................