Cabletron Systems KBU64 Rackmount - Manuals

KBU 64 Rackmount Specification 80-10100001-09 1–1 1 KBU 64 Rackmount Specification 1.1 Introduction This manual describes the Rackmount v ersion of the KBU64. Thestandalone KBU 64 has its own manual, Publication 80-10100000. Forinformation on the command menus and parameters in the rackmountversion,...

KBU 64 Rackmount Specification 80-10100001-09 1–3 The rackmount v ersion of the KBU 64 is functionally the same as thestandalone in most respects, as it uses the same software. Thereforemost of the sections of your KBU64 Manual manual (Publication 80-10100000) relating to KBU 64's operation are rele...

Front and Rear Panels and Interfaces 80-10100001-09 2–1 2 Front and Rear Panels and Interfaces 2.1 Front Panel See the KBU64 standalone manual (Publication 80-10100000) for thedescription of operation. 2.2 Rear Interface Cards W ith all 3 card types the USER ports are configured as physical DCEs,the...

KBU64 Rackmount User Manual 80-10100001-09 2–4 2.2.2 Command Port - KBU 64 Rear Interface Cards The command port on each of the Rear Interface Card types is a female15 way 'D' type and uses the same V28 lev el circuits as the standaloneKBU 64. You can only use this command port when a Manager Card i...

Manager Card 80-10100001-09 3–1 3 Manager Card 3.1 Introduction The KBU 64 Manager Card is a discrete card for use with onlyrackmount KBU 64 cards. Like the rackmount KBU 64, the ManagerCard also consists of a card pair. The rear card prov ides a commandport for management of all KBU 64 cards within...

Card Installation 80-10100001-09 4–1 4 Card Installation Each KBU 64 ‘front’ card must be associated with an appropriate (V.24,X.21, or V.35) rear interface card i.e. they should always be installed in pairs (although no damage will result in partial installation) If the KBU 64s are to be managed in...

KBU64 Rackmount User Manual 80-10100001-09 4–2 4.2 Configuration Using a Manager Card W ith the Manager Card pair and all KBU card pairs fitted the first task isto set the indiv idual KBU 64 poll numbers. Once all the units areinstalled and a suitable terminal connected to the rack manager cardcomma...

Installation and Power Supply Requirements 80-10100001-09 5–1 5 Installation and Power Supply Requirements Safety Warning: Before connecting the mains supply to the unit check the supply voltage as detailedbelow. The product is a high density rack mounted unit designed to sit in a 19"communicati...

Rack Specifications 80-10100001-09 6–1 6 Rack Specifications Dimensions 482mm W; 400mm H (9U); 370mm D Mains Voltage 93-132V (110-120V nominal) 187-264V (220-240V nominal) Consumption 200VA max. Frequency 50/60Hz nominal Mains Rear PanelFuses 1.6 or 3.15AH, 250V Anti-Surge(T) 20x5mm (220-240V range)...

KBU64 Rackmount User Manual 80-10100001-09 6–2 Environment Ambient temperature: Operating 0 ° C to 30 ° C Storage -20 ° C to 70 ° C Atmospheric pressure: 86.0kPa to106.0kPa Relativ e Humidity: 5% to 95%non-condensing

Regulatory Requirements 80-10100001-09 7–1 7 Regulatory Requirements 7.1 United Kingdom and Europe Users based in the United Kingdom and Europe must pay particular attentionto the information contained in sections 7.1 and 7.2 . B.A.B.T. Pan European Approval number AA6046512. 1. The KBU 64 Rackmount...