Cabletron Systems 9G421-02 - Manuals

Page 3 - Appendix; Introduction; front-panel gigabit Ethernet ports; Modifying Fields and User Privileges; SmartSwitch 9000 Module Local Management User’s

1 Appendix 9G421-02/9G429-02 Module Specific Information Introduction This appendix contains local management information that is specific to the 9G421-02 and 9G429-02 Ethernet Modules. The 9G421-02 and 9G429-02 modules are 3-port Ethernet switching modules with: • 2 front-panel gigabit Ethernet por...

Page 4 - Module Interface Codes

9G421-02/9G429-02 Module Specific Information 2 Module Interface Codes The 9G421-02 and 9G429-02 modules have 7 interfaces each. Table 1 lists the identifying number, name, and description of each interface. Use the numbers listed in Table 1 to configure the module’s default interface (see the Figur...

Page 5 - General Configuration Screen

3 9G421-02/9G429-02 Module Specific Information General Configuration Screen The General Configuration Screen (Figure 1), displays information about the selected module and allows you to set the following general parameters: • Module Date and Time • Screen Refresh and Lockout Time • Host IP Address ...

Page 6 - General Configuration Screen Fields; Displays the serial number of the selected module.; Module Board Revision; Displays the version number of the selected module.; FLASH Memory; default; refresh rate is 3 seconds. The; range

9G421-02/9G429-02 Module Specific Information 4 General Configuration Screen Fields The following information briefly explains each General Configuration Screen field. Module Serial # Displays the serial number of the selected module. Module Board Revision Displays the version number of the selected...

Page 7 - Screen Lockout Time; lockout time is 15 minutes. The; is; Host IP Address; Subnet Mask; Default Gateway; is NONE DEFINED, meaning no default gateway selected.

5 9G421-02/9G429-02 Module Specific Information Screen Lockout Time Contains the maximum number of minutes that the Local Management application will display a module’s screen while pending input or action from a user. For example, if you enter 5 in this field, users will have up to five minutes to ...

Page 8 - Default Interface; is NONE DEFINED, meaning no default interface selected.; Base MAC Address; Exiting the General Configuration Screen

9G421-02/9G429-02 Module Specific Information 6 Default Interface Contains the number that represents the interface that is connected to the module’s Default Gateway. In some instances, dissimilar modules have different corresponding interface numbers. For example, if you are assigning a default int...

Page 9 - Port Statistics Screen

7 9G421-02/9G429-02 Module Specific Information Port Statistics Screen The Port Statistics Screen (Figure 2), displays information and statistics about the module’s Ethernet ports. Figure 2. Port Statistics Screen SmartSwitch 9000 Local Management Port Statistics Module Name: 9G421-02 Firmware Revis...

Page 10 - Port Statistics Screen Fields; Indicates the current port for which statistics are displayed.

9G421-02/9G429-02 Module Specific Information 8 Port Statistics Screen Fields The following information briefly explains each Port Statistics Screen field. PORT # Indicates the current port for which statistics are displayed. OCTETS Displays the number of octets transmitted and received on the port....

Page 11 - Enable or disable ports from the Bridge Configuration Screen.

9 9G421-02/9G429-02 Module Specific Information MULTICASTS Displays the number of multicasts received. LINK STATUS Indicates whether there is a physical connection from this port to another device. One of the following values appears: • Link - There is a link signal present; there is a valid physica...

Page 12 - Displaying Statistics for Another Port; To display statistics for another port:; Space; to increment (or press the; Backspace; Exiting the Port Statistics Screen; Return

9G421-02/9G429-02 Module Specific Information 10 Displaying Statistics for Another Port To display statistics for another port: 1. Use the arrow keys to highlight the Port # field at the bottom of the screen. 2. Press the Space Bar to increment (or press the Backspace key to decrement) the port numb...