Page 2 - MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.; The agents, dealers or employees of BUNN; SOLE OPTION AS SPECIFIED HEREIN, TO REPAIR, REPLACEMENT OR REFUND.
2 27091.1 051910 BUNN-O-MATIC COMMERCIAL PRODUCT WARRANTY Bunn-O-Matic Corp. (“BUNN”) warrants equipment manufactured by it as follows: 1) All equipment other than as specified below: 2 years parts and 1 year labor. 2) Electronic circuit and/or control boards: parts and labor for 3 years. 3) Compres...
Page 3 - amount and grind from the factory setting.; USER NOTICES
3 CONTENTS User Notices ............................................................. 3 Electrical Requirements ............................................ 4 CE requirements ....................................................... 4 Operating Controls ...................................................
Page 4 - CE REQUIREMENTS; • Machine must not be immersed for cleaning.; PREVENTIVE MAINTENANCE; Corporation at
4 ELECTRICAL REQUIREMENTS The grinder has an attached cordset and requires 2-wire, grounded service rated 230 volts ac, 10 amp single phase, 50 Hz for 230V models. P1028 P1029 OPERATING CONTROLS Off/On/Start Switch (Models LPGA and LPGA-2E) OFF - (upper position) Switching to this position stops all...
Page 5 - disconnect grinder from the power source.; COFFEE GRINDING; hopper for an ample supply of whole bean coffee.
5 CLEANING EXTERIOR SURFACES The use of a damp cloth rinsed in any mild, nonabrasive, liquid detergent is recommended for cleaning all surfaces on Bunn-O-Matic equipment. Care should be taken not to scratch the hopper or windows with any abrasive material. Regular cleaning will keep your grinder loo...
Page 6 - BUNN; Use this 5 second per ounce figure as an APPROXIMATE guide only.
6 INITIAL SET-UP/ADJUSTMENTS The grind can be set from fine to very coarse. The grind may be adjusted for use in most commercial coffee brewers. The following procedures should be used to make adjustments. NOTE - A change in the burr adjustment will also change the amount dispensed. Any adjustment t...