Page 4 - Cultivator; WARRANTY POLICY; must; GOVERNMENT LEGISLATION:; This warranty does not apply to rentals
Cultivator 1 WARRANTY POLICY Buhler Manufacturing products are warranted for a period of twelve (12) months (90 days for commercial application) from original date of purchase, by original purchaser, to be free from defects in material and workmanship under correct, normal agricultural use and prope...
Page 5 - INTRODUCTION; for a complete list of dealers in your area.
Cultivator 2 INTRODUCTION The Buhler Farm King Cultivator features a solid welded frame construction with 2” x 2” x .250 wall tubing. There is a simple one bolt shank allowing for easy spacing adjustment. “S” tines are forged steel and feature reversible points. Optional gauge wheels and a 7” sweep ...
Page 6 - SAFETY; The safety alert symbol means...; CAUTION; alert against unsafe practices.; WARNING; against unsafe practices.; DANGER
Cultivator 3 SAFETY Remember, YOU are the key to safety. Good safety practices not only protect you, but also the people around you. Make these practices a working part of your safety program. Be certain that everyone operating this equipment is familiar with the recommended operating and maintenanc...
Page 8 - SERVICE AND MAINTENANCE SAFETY; keep service area clean and dry; STORAGE SAFETY
Cultivator 5 SERVICE AND MAINTENANCE SAFETY Stop engine, set brake, remove ignition key, and wait for all moving parts to stop before servicing, adjusting, repairing, or unplugging. Support the equipment with blocks or safety stands before working beneath it. Follow good shop practices including: - ...
Page 9 - ASSEMBLY
Cultivator 6 ASSEMBLY S-TINE SPACING Each cultivator main frame is divided up into 3 sections by two braces. Space tines equally within these sections.
Page 10 - OPERATION; Raise the Cultivator off the ground.
Cultivator 7 OPERATION THEORY OF OPERATION REVERSIBLE POINT REPLACEMENT OR REVERSAL : 1. Raise the Cultivator off the ground. 2. Securely block up the frame 3. Remove the Plow Bolts as required. 4. If the top side of the reversible point has not been used, reverse and reattach. If it has been used, ...
Page 11 - MAINTENANCE
Page 15 - SHIPPING KIT AND BUNDLE NUMBERS – cont’d.
Cultivator 12 SHIPPING KIT AND BUNDLE NUMBERS – cont’d. Y847FC 84” CULTIVATOR w/gauge wheel and sweeps 1 F12 Gauge Wheel 1 F0351 Hitch 1 F0374 Frame 84” 1 F6516 Tines 1 F0381 Carton of Parts 1 F6591 7” Sweeps The following is a list of options available for the Kits listed above. F11 7” Sweep 967549...
Page 16 - NOTES
Page 20 - Buhler Manufacturing
DIVISION LOCATIONS U.S. WAREHOUSES Farm King Division 301 Mountain Street S. Morden, MB R6M 1X7 Ph.: (204) 822-4467 Fax: (204) 822-6348 Allied/Inland Division 1260 Clarence Avenue Winnipeg, MB R3T 1T2 Ph.: (204) 284-6100 Fax: (204) 477-2325 B.I.I. Division 1330 43 rd Street N.W. Fargo, ND 58102 Ph: ...