Buhler FK330 - Manuals - manualsarea.com

Page 2 - 6” Allied Snowblower; WARRANTY REGISTRATION AND POLICY; Any labor subject to warranty; must; be authorized by Buhler Manufacturing. The labor

96” Allied Snowblower WARRANTY REGISTRATION AND POLICY Buhler Manufacturing products are warranted for a period of twelve (12) months from original date of purchase, by original purchaser, to be free from defects in material and workmanship under correct, normal agricultural use and proper applicati...

Page 3 - SNOWBLOWER

96” Allied Snowblower SNOWBLOWER This manual is for 96" Allied Snowblower with a quick coupling hitch. With this hitch, the blower can be mounted on a tractor with either a quick hitch or the standard three-point hitch. All 96" Allied snowblowers have a sealed oil bath gearbox. The snowblowe...

Page 4 - OPERATING INSTRUCTIONS

96” Allied Snowblower OPERATING INSTRUCTIONS 1. Do not operate the blower in the fully raised position. The three-point hitch on some tractors rises high enough to cause the PTO shaft to bind. This can cause damage to the PTO shaft and/or to the hitch and pins. 2. Depth of cut can be partially contr...

Page 5 - OPERATING INSTRUCTIONS – cont’d

96” Allied Snowblower OPERATING INSTRUCTIONS – cont’d 11. Shear Sprocket: The shear sprocket (#24) should be checked at the beginning of every season to make sure it will spin freely. With time this sprocket could corrode and seize which will not allow the shear bolt to break if something jams in th...

Page 6 - ASSEMBLY INSTRUCTIONS; Lift arms for quick coupling hitch are 30 3⁄4” long versus 35” for the

96” Allied Snowblower ASSEMBLY INSTRUCTIONS 1. Fasten the two quick hitch arms (#57 & #58, left and right) to the main body. Use eight 5/8” x 1 ¼” hex bolts, lock washers and hex nuts. Note: Lift arms for quick coupling hitch are 30 ¾” long versus 35” for the standard three point hitch. 2. Bolt ...

Page 7 - ASSEMBLY INSTRUCTIONS – cont’d.

96” Allied Snowblower ASSEMBLY INSTRUCTIONS – cont’d. 7. Mounting blower on tractor: a) The pins supplied with the snowblower are for a category 2 quick hitch. The quick coupling hitch has two holes both at the top of the hitch and at each lift arm. When using a quick coupler, the pins must be in th...

Page 8 - SHIELD

96” Allied Snowblower ASSEMBLY INSTRUCTIONS – cont’d. 8. PTO SHIELD All snowblowers are supplied with a PTO shield (#61). To install, remove the two rear bolts at the top of the gearbox (#38). Bolt the PTO shield to the gearbox by the hinges using these same bolts. A utility spring (#62) keeps the s...

Page 9 - 6” SNOWBLOWER W/QUICK HITCH

96” Allied Snowblower 96” SNOWBLOWER W/QUICK HITCH - 8 -

Page 11 - DESCRIPTION

96” Allied Snowblower WHEN ORDERING PARTS Always give your dealer the Model and Serial Number of your machine to assist him in ordering and obtaining the correct parts. Use the exploded view and tabular listing of the area of interest to exactly identify the required part. 96'' ALLIED SNOWBLOWERS IT...

Page 13 - 6” ALLIED SNOWBLOWER PTO

96” Allied Snowblower 96” ALLIED SNOWBLOWER PTO (Standard and Optional Long) - 12 -

Page 14 - Description

96” Allied Snowblower 96" ALLIED SNOWBLOWER PTO (Optional Long) Item # Part # Description F0586 Shaft Complete 907996 Tractor Half of PTO (Shear) 907997 Implement Half of PTO (Clamp Yoke) 1 907989 Shear Assembly 2 936199 Safety Slide Lock Repair Kit (Collar, Spring, Ret. Ring, 2-Pawls) 3 936249 ...

Page 18 - 6” ALLIED SNOWBLOWER BUNDLES

96” Allied Snowblower 96” ALLIED SNOWBLOWER BUNDLES QUANTITY BUNDLE NO. DESCRIPTION 96” Allied Snowblower w/Hydraulic Chute Control & 3-Blade Fan - YC9620Q 1 FX9214 Body Assembly 1 FX9204 Quick Hitch 1 F9211 Spout Assembly 1 F0585 Standard PTO 96” Allied Snowblower w/Hydraulic Chute Control &...