Buhler FK303 - Manuals

Buhler FK303 – Manual in PDF format online.

Manuals:

Manual

Manual Buhler FK303

Summary

Page 2 - 5 Series Rotary Tiller; TABLE OF CONTENTS – cont’d.

25 Series Rotary Tiller TABLE OF CONTENTS – cont’d. Bolt Torque .........................................................................27 Parts Lists and Drawings Tiller Drawings ........................................................... 28 & 29 Tiller Parts List ................................

Page 3 - WARRANTY POLICY; Any labor subject to warranty; must; be authorized by Buhler Manufacturing. The labor

25 Series Rotary Tiller - 1 - WARRANTY POLICY Buhler Manufacturing products are warranted for a period of twelve (12) months from original date of purchase, by original purchaser, to be free from defects in material and workmanship under correct, normal agricultural use and proper applications. Buhl...

Page 4 - INTRODUCTION

25 Series Rotary Tiller - 2 - INTRODUCTION Congratulations on your choice of a Buhler Farm King 25 Series Rotary-Tiller to complement your landscaping operation. This equipment has been designed and manufactured to meet the needs of a discerning landscaping industry for the efficient tilling of soil...

Page 8 - SAFETY SIGN LOCATIONS; Work

25 Series Rotary Tiller - 6 - How to Install Safety signs: * Be sure that the installation area is clean and dry. * Decide on the exact position before you remove the backing paper. * Remove the smallest portion of the split backing paper. * Align the safety sign over the specified area and carefull...

Page 9 - SAFETY SIGN LOCATION S – cont’d.

25 Series Rotary Tiller - 7 - SAFETY SIGN LOCATION S – cont’d. Safety sign “A” Safety sign “B” Safety sign “C” Safety Sign “C” REMEMBER - If Safety signs have been damaged, removed, become illegible or parts replaced without safety signs, new safety signs must be applied. New safety signs are availa...

Page 10 - OPERATION

25 Series Rotary Tiller - 8 - OPERATION TO THE NEW OPERATOR OR OWNER The Buhler Farm King 25 Series Rotary Tiller is a machine that combines the primary and secondary tillage operation into one machine. It breaks up the soil and prepares the seed bed in one pass. Rotational power to the rotor is pro...

Page 11 - PRE-OPERATION CHECKLIST

25 Series Rotary Tiller - 9 - MACHINE BREAK -IN Although there are no operational restrictions on the Tiller when used for the first time, it is recommended that the following mechanical items be checked: A. After operating for 1/2 hour or after completing 1/2 acre: 1. Check all nuts, bolts and othe...

Page 12 - EQUIPMENT MATCHING; Use Table 1 as a guide in selecting the tractor horsepower; Table 1 Horsepower vs. Width; Do not exceed the recommended horsepower levels. The use; Load Sensing Hydraulics:

25 Series Rotary Tiller - 10 - EQUIPMENT MATCHING To insure the safe and reliable operation of the Tiller, it is necessary to use a tractor with the correct specifications. Use the following list as a guide in selecting a tractor to use on the machine. 1. Horsepower: Use Table 1 as a guide in select...

Page 13 - DRIVELINE DIMENSION; Clear the area of bystanders, especially small children.

25 Series Rotary Tiller - 11 - DRIVELINE DIMENSION A PTO driveline is supplied with the machine. To accommodate the vari ety of 3 point hitch geometry available today, the driveline can be too long for some machines and must be cut. It is very important that the driveline be free to telescope but no...

Page 16 - FIELD OPERATION; Before going to the field review Transporting Section.

25 Series Rotary Tiller - 14 - FIELD OPERATION Buhler Farm King 25 Series Rotary Tillers are designed with the inherent flexibility of operating well in almost any kind of soil and terrain conditions. However, the operator has the responsibility of being familiar with all operating and safety proced...

Page 19 - TRANSPORTING; Be sure all bystanders are clear of the machine.

25 Series Rotary Tiller - 17 - TRANSPORTING When transporting the machine, review and follow these instructions: 1. Be sure all bystanders are clear of the machine. 2. Be sure that the machine is securely attached to the tractor and all retainer pins are installed. 3. Clean the SMV emblem, lights an...

Page 20 - STORAGE

25 Series Rotary Tiller - 18 - STORAGE After the season's use, the machine should be thoroughly inspected and prepared for storage. Repair or replace any worn or damaged components to prevent any unnecessary down time at the start of next season. To insure a long, trouble free life, this procedure s...

Page 23 - SERVICING INTERVALS – cont’d.; Add as required

25 Series Rotary Tiller - 21 - SERVICING INTERVALS – cont’d. 40 Hours 1. Check gear box oil level. Add as required 2. Add approximately 10 squirts of grease in chain case. Annually 1. Change gearbox oil. Refill with SAE 85W90 gear oil. 2. Wash machine.

Page 25 - SHEAR BOLT

25 Series Rotary Tiller -23- SHEAR BOLT A shear pin is provided in the input drive shaft at the gearbox to protect the drive system during an overload. To change the shear pin, follow this procedure: 1. Place all controls in neutral, stop engine, set park brake, remove ignition key and wait for all ...

Page 26 - CLUTCH MAIN TENANCE; Disengage clutch by turning in the four socket set screws.

25 Series Rotary Tiller -24- CLUTCH MAIN TENANCE 1. Before first use or after storage of more than one month, the clutch should be checked. 2. Disengage clutch by turning in the four socket set screws. 3. Run the PTO at low idle to slip the clutc h linings. This will help remove the dirt, corrosion,...

Page 28 - ASSEMBLY

25 Series Rotary Tiller -26- ASSEMBLY The machine is shipped with the PTO shaft not installed. To install the PTO d riveline on the machine, follow this procedure: 1. Clear the area of bystanders, especially small children. 2. Clean the splines on the yoke and the input shaft. 3. Align the splines o...

Page 29 - BOLT TORQUE; CHECKING BOLT TORQUE

25 Series Rotary Tiller -27- BOLT TORQUE CHECKING BOLT TORQUE The tables shown below give correct torque values for various bolts and cap screws. Tighten all bolts to the torques specified in chart unless otherwise noted. Check tightness of bolts periodically, using bolt torque chart as a guide. Rep...