Brother MFC-8440- Manuals

4 Setting Up the Machine Do NOT connect the interface cable.Connecting the interface cable is done when installing the driver. 1 Open the ADF cover. 2 Insert the tabs of ADF support into the holes of the ADF one side at a time. 3 Push ADF Support down until it latches in place. 4 Close the ADF cover...

5 S e tti n g Up th e M a c h in e W in dow s ® USB W indow s ® Pa ra lle l W indo w s NT ® 4. 0 Pa ra lle l M a ci nt osh ® USB M a c int osh ® Ne tw o rk W in dow s ® Ne two rk Fo r A d mi n is tra to rs 3 Rock it from side to side several times to distribute the toner evenly inside the assembly. ...

7 S e tti n g Up th e M a c h in e W in dow s ® USB W indow s ® Pa ra lle l W indo w s NT ® 4. 0 Pa ra lle l M a ci nt osh ® USB M a c int osh ® Ne tw o rk W in dow s ® Ne two rk Fo r A d mi n is tra to rs Do not connect the Parallel or USB cable yet. 1 Make sure that the power switch is off.Connect...

8 MFC-8440, MFC-8840D and MFC-8840DN have similar control panel keys. Choose the Receive mode which best suits your needs. 1 Press the Menu key. 2 Press key. 3 Press key. 4 Press or to select the mode. 5 Press the Set key. 6 Press the Stop/Exit key. 6 Selecting a Receive Mode Set Menu Stop/Exit Dial...

9 S e tti n g Up th e M a c h in e W in dow s ® USB W indow s ® Pa ra lle l W indo w s NT ® 4. 0 Pa ra lle l M a ci nt osh ® USB M a c int osh ® Ne tw o rk W in dow s ® Ne two rk Fo r A d mi n is tra to rs The MFC displays the date and time, and prints it on every fax you send. 1 Press the Menu key....

10 Setting Up the Machine MFC-8440, MFC-8840D and MFC-8840DN have similar control panel keys. You should store your name and fax number to be printed on all fax pages that you send. 1 Press the Menu key. 2 Press the key. 3 Press the key. 4 Enter your fax number (up to 20 digits) on the dial pad, and...

11 S e tti n g Up th e M a c h in e W in dow s ® USB W indow s ® Pa ra lle l W indo w s NT ® 4. 0 Pa ra lle l M a ci nt osh ® USB M a c int osh ® Ne tw o rk W in dow s ® Ne two rk Fo r A d mi n is tra to rs 1 Press the Menu key. 2 Press the key. 3 Press the key. 4 Select your language (ENGLISH or FR...

12 Installing the Driver & Software You can find a variety of information on the CD-ROM. Install Software You can install printer, PC-FAX Send/Receive, scanner drivers and the various utility items, including PaperPort ® and OmniPage ® OCR. On-Line Registration You will be pointed to the Brother...

14 Installing the Driver & Software Make sure that you have completed the instructions from Step 1 “Setting Up the Machine” on pages 4 - 11. 1 Switch off and unplug the MFC from the AC outlet and disconnect it from your computer, if you already connected an interface cable. 2 Turn on your comput...

16 Installing the Driver & Software D When the Brother Software License Agreement window appears, click Yes . E Select Local Interface , and then click Next . F Select Standard , and then click Next . The application files will be copied and installed to your computer. For USB Interface Cable Us...

17 Make sure that you followed the instructions in 1 to F on pages 14 - 16. G When this screen appears, connect the USB interface cable to your PC, and then connect it to the MFC.Turn on the MFC by plugging in the power cord. Turn the power switch on. It will take a few seconds for the installation ...

18 Installing the Driver & Software L The README.WRI file will be displayed.Please read this file for troubleshooting information and then close the file to continue installation. M Check the Run On-Line Registration and then click Next . N Click Finish to restart your computer. O After the comp...

22 Installing the Driver & Software Make sure that you followed the instructions in 1 to F on pages 14 - 16. G When this screen appears, connect the USB interface cable to your PC, and then connect it to the MFC. Turn on the MFC by plugging in the power cord. Turn the power switch on. It will ta...

35 Make sure that you followed the instructions from Step 1 “Setting Up the Machine” on pages 4 - 11. 1 Turn on your computer.You must be logged on as the Administrator. 2 Connect the parallel interface cable to your computer, and then connect it to the MFC. 3 Make sure you turn on the MFC by pluggi...

42 Installing the Driver & Software Make sure that you have completed the instructions from Step 1 “Setting Up the Machine” on pages 4 - 11. 1 Switch off and unplug the MFC from the AC outlet and disconnect it from your Macintosh if you already connected an interface cable. 2 Turn on your Macint...

46 Installing the Driver & Software Make sure that you have completed the instructions from Step 1 “Setting Up the Machine” on pages 4 - 11. 1 Make sure that the NC-9100h (Network Print/Fax Server) is installed into the MFC (MFC-8840DN has the NC-9100h installed as standard). (See "Optional ...

51 The BRAdmin Professional software utility is designed to manage your Brother network connected devices such as network-ready printers and/or network-ready Multifunction devices in a Local Area Network (LAN) environment.BRAdmin Professional can also be used to manage devices from other manufacture...