Page 3 - Service Center Locations
- 1 - Brother Cool Laminator LX-900/LX-910D Fax-Back System Brother Customer Service has installed an easy-to-use Fax-Back System, so you can get instant answers to common technical questions and product information for all Brother products. This system is available 24 hours a day, 7 days a week. Yo...
Page 4 - Ordering Accessories and Supplies (in the USA); Adhesive Back Laminate
- 2 - Ordering Accessories and Supplies (in the USA) For best quality results use only genuine Brother accessories, available at most Brother retailers. If you cannot find the accessory you need and you have a Visa, MasterCard, Discover, or American Express credit card, you can order accessories dir...
Page 5 - Table of Contents
- 3 - Table of Contents Getting started ........................................................................................................................................................ 4 Features ...................................................................................................
Page 7 - Precautions
- 5 - Precautions To avoid personal injury or damage to the machine, please pay close attention to the CAUTION andWARNING notices in this manual. They are there for your safety, as well as to point out actions that mightcause damage to your machine. WARNING: - Do not attempt to repair or disassemble...
Page 8 - Package list
- 6 - Package list 1 Machine 1 2 Film cartridge 1 (Double side laminate type) 3 AC adapter 1 4 Owner’s manual 1 5 Compatible accessory list 1 6 Supplemental PC software (CD-ROM) 1 1 2 3 4 5 6
Page 9 - Part names; Outside of the machine
- 7 - Part names Outside of the machine DC connector Located on the left, backside of the machine. Aperture for the AC adapter. Top cover For replacing the film cartridge and cutter units. Viewing window Located on the top cover. Allows you to make sure that thecorrect type of film cartridge is load...
Page 11 - Setup; Installing the film cartridge
- 9 - Setup Installing the film cartridge (1) Open the top cover. (2) Push the roller release lever (green color) andlift the roller holder upwards. (3) Carefully install the film cartridge, square enddown.Match the arrow symbol to install new cartridge. Note- Make sure that the shutter of the cartr...
Page 12 - Turning the machine on/off
- 10 - (4) Return the roller holder to the original positionand press the roller holder lock buttons (purplecolor) as illustrated. You will hear the rollerholder click into place. Press the roller holderfurther to secure the roller unit. (5) Close the top cover. Turning the machine on/off (1) Connec...
Page 14 - About film rolls; Film-supply maintenance
- 12 - About film rolls There are a variety of different roll film types that have been designed to meet your needs. This machine supports 9.0 inch (A4) or 4.8 inch (A6) width cartridges.Use only Brother authorized film cartridges or film refills. The above mark appears on all packages ofauthorized ...
Page 15 - Replacing the film cartridge
- 13 - Replacing the film cartridge WARNING:Never touch the surface of the blades when installing/replacing the film cartridge. (1) Turn the power off and open the top cover. (2) Push the roller release lever (green color) andlift the roller holder upwards. (3) Remove the film cartridge carefully.
Page 21 - Document Size; The Auto Sheet Feeder
- 19 - Document Size The size of the document that you wish to laminate should not be larger (or smaller) than the width that yourmachine can accommodate. The document should be between 2.2 and 8.5 inches (55 and 216mm) wideand between 3.54 and 39.4 inches (90 and 1000mm) long. The paper thickness s...
Page 22 - Operating the machine
- 20 - Operating the machine Laminate documents, Create magnetic signs, and laminate with adhesive back: (1) Open the document supporter. (2) Load the document to be laminated onto thedocument tray. Documents should usually beloaded face up. (3) Align the paper with the tab on the right andslide the...
Page 24 - Auto Cut Mode – Border; Auto Cut Mode – No Border; Auto Cut Mode – Off (for sensitive documents)
- 22 - How to define the cutting position(creating borders) The Auto Cross Cutting System automatically detects the size of your document and cuts each edge. Thecutting position can be adjusted to create a margin on each edge of the laminated document . Auto Cut Mode – Border This mode is ideal for ...
Page 25 - Manual feeding and manual cutting
- 23 - Manual feeding and manual cutting You can feed and cut the document manually using the Cool Laminator. (1) Set the document on the document tray. (2) Press “Feed” to feed the document manually.The “Feed” button is a self-repeating key. Thedocument will continue to be fed until the“Feed” butto...
Page 26 - Corner cutting
- 24 - Corner cutting After laminating, you can trim each corner of the document. (1) Insert a corner of the document into thecorner-cutter slot. (2) The machine will automatically trim the cornerof the document. (3) Remove the document from the slot. NoteThe maximum thickness of the original docume...
Page 27 - Corner cutter dust box
- 25 - Corner cutter dust box The trimmings from the corner cutter are collectedin the corner cutter dust box located just below thecorner cutter slot. Pull the dust box towards you todiscard the trimmings and set the box back into itsoriginal position.
Page 28 - Regular maintenance and troubleshooting; Regular maintenance
- 26 - Regular maintenance and troubleshooting You can keep your machine in optimum condition by cleaning it on a regular basis. Regular maintenance Avoid small debris and objectsBe careful not to let anything slip into the machine, especially metal objects such as paper clips and staples.For optimu...
Page 31 - Replacing the side cutter units
- 29 - Replacing the side cutter units Cutter performance will decline as blades are dulled through use or become coated with adhesives. Use thefollowing operation to replace the side cutter units. CAUTION:Do not touch the surface of the blade when replacing the cutter units. Handle the blades withg...
Page 33 - Replacing the corner cutter tray
- 31 - (9) Close the top cover. (10) Turn the power on. Press Feed button until youcan see the edge of the film to remove anyslack from the film. Replacing the corner cutter tray The cutter performance will decline as blades are dulled.You can improve it by changing the corner cutter tray.The both s...
Page 34 - Troubleshooting
- 32 - Troubleshooting Problem Cause Solution The AC adapter is not connected properly. Check that the machine is plugged into a powersource. No activity after themachine has beenturned on. The top cover is not completely closed. Close the top cover. The document was not set properly. Reset the docu...
Page 35 - Specifications
- 33 - Specifications Model number: LX-900/LX-910D Processing method: Cold pressure method Power supply: AC adapter (included)USA 120V±10% (60Hz) Output DC 18V 700mA Min./max. width of document: 2.17” – 8.50” (55mm – 216mm) Min./max. length of document: 3.54” – 39.4” (90mm – 1000mm) Min./max. thickn...
Page 36 - Index
- 34 - Index A AC adapter .........................................6,10,11,32Adhesive back laminate film ............................ 21Adhesive sticker ............................................. 12Alert buzzer .................................................... 32Auto Cross Cutting System ........
Page 38 - Appendix
- 36 - Appendix (About PrintMaster Gold Software) Mindscape and PrintMaster are registered trademarks and the Mindscape logo is a trademark of TheLearning Company.Adobe and Acrobat are trademarks of Adobe system Incorporated.Windows is a registered trademark of Microsoft corp. in the U.S. and other ...
Page 40 - Getting Started
- 38 - Getting Started Before installing, check the system requirements listed below to make sure your computer is able to workwith PrintMaster Gold. System Requirements PrintMaster Gold performs on any computer with the following features: • IBM PC with a 486DX2 66 MHz (or higher) • Windows 95, Win...
Page 44 - The World of PrintMaster Gold; THE HUB SCREEN
- 42 - The World of PrintMaster Gold This section introduces you to the PrintMaster Gold environment. As soon as you open the program, you'llnotice PrintMaster Gold has several interrelated areas, each with it's own individual purpose and look. Eacharea-including the Hub, Art Gallery, Sentiments Gal...
Page 45 - The workspace
- 43 - The workspace The Workspace is your own personal drafting board, with all the text, drawing, and editing tools you'll needto make a beautiful project. Here, you can put the finishing touches on your project, add new pictures, typein your personal message, and print.Below, we will introduce yo...
Page 50 - Owner’s Manual
LC0074001 Printed in China 9906 ENGLISH ® Owner’s Manual Guide d’utilisation