Brother HL7050- Manuals
Brother HL7050– User Manual in PDF format online.
Manuals:
User Manual Brother HL7050
Summary
i YL4US_FAX2800MFC4800-FM5.5 Trademarks Brother is a registered trademark of Brother Industries, Ltd.HP, HP/UX,JetDirect and JetAdmin are trademarks of Hewllet-Packard Company.DEC, DEC server, VMS, LAT, and ULTRIX are trademarks of Digital Equipment Corporation.UNIX is a trademarks of UNIX Systems L...
ii YL4US_FAX2800MFC4800-FM5.5 IMPORTANT NOTE: For technical and operational assistance, you must call. Calls must be made from within that country. In USA 1-800-276-7746 In Canada 1-877-BROTHER(514) 685-6464 (In Montreal) If you have any comments or suggestions, please write to us at: In Europe Euro...
iii YL4US_FAX2800MFC4800-FM5.5 IMPORTANT INFORMATION: REGULATIONS Federal Communications Commission (FCC) Declaration of Conformity (For U.S.A. only) Responsible Party: Brother International Corporation 100 Somerset Corporate BoulevardBridgewater, NJ 08807-0911, USATEL: (908) 704-1700 declares, that...
iv YL4US_FAX2800MFC4800-FM5.5 Declaration of Conformity (Europe) We, Brother Industries, Ltd., 15-1, Naeshiro-cho, Mizuho-ku, Nagoya 467-8561, Japan declare that this product is in conformity with the following normative documents. Safety: EN 60950, EMC: EN 55022 Class B, EN 55024 following the prov...
v ZleMFC-US-FAX-4750e/5750e- Table of Contents IMPORTANT INFORMATION: REGULATIONS ........1-iii Federal Communications Commission (FCC) Declara-tion of Conformity (For U.S.A. only) .......................1-iiiIndustry Canada Compliance Statement (For Canada only) .......................................
vi ZleMFC-US-FAX-4750e/5750e- Installing the Brother Peer to Peer Software .............. 2-6Windows ® NT 4.0 Printing Associating to the Printer ............................................ 2-7Windows ® NT 4.0 Printing Adding a Second Brother LPR Port ............................ 2-8Windows ® NT 3....
vii ZleMFC-US-FAX-4750e/5750e- 5 Configuring Internet Printing for Windows ® ............................................... 5-1 Internet Printing Installation .............................................. 5-1 Overview..................................................................... 5-1Brother ...
viii ZleMFC-US-FAX-4750e/5750e- (Queue Server Mode in Bindery emulation mode) using PCONSOLE and BRCONFIG ................................... 6-14Configuring the Brother Print Server (Queue Server Mode in NDS mode) using PCONSOLE and BRCONFIG ........................................................ ...
ix ZleMFC-US-FAX-4750e/5750e- Installation on Other Host Computers ...................... 9-10 10 BANYAN VINES Network Configuration10-1 Printing from Banyan Vines Systems ............................. 10-1 Overview................................................................... 10-1Necessary ite...
UNIX PRINTING 1 - 1 1 YL4US_FAX2800MFC4800-FM5.5 1 Unix Printing Printing from Unix/Linux using TCP/IP Overview Brother print servers are supplied with the Transmission Control Protocol/Internet Protocol (TCP/IP) protocol suite. Since virtually all UNIX host computers support TCP/IP, this capability...
UNIX PRINTING 1 - 3 YL4US_FAX2800MFC4800-FM5.5 General TCP/IP UNIX Host Configuration The configuration process for most UNIX systems is described in the following steps. As this process varies, we recommend that you refer to your system documentation for additional information. 1 Configure the /etc...
UNIX PRINTING 1 - 5 YL4US_FAX2800MFC4800-FM5.5 %lpc statuslaser1:queuing is enabledprinting is enabledno entriesno daemon present Users of AT&T-compatible UNIX systems can generally use the lpstat or rlpstat commands to obtain similar status information. Because this procedure varies from system...
1 - 6 UNIX PRINTING YL4US_FAX2800MFC4800-FM5.5 If you have an HP/UX system, IBM RS/6000 AIX computer, or Sun Solaris 2.xx, there is no printcap file. This is also true for some other AT&T-based UNIX systems, as well as many VMS-based TCP/IP software packages (for example, UCX, TGV Multinet, etc....
UNIX PRINTING 1 - 7 YL4US_FAX2800MFC4800-FM5.5 HP/UX Configuration In the case of HP/UX10.xx, the sam program is used to set up the remote printer. The steps are as follows: 1 Execute the sam program. From the list of options, select Printers and Plotters. 2 Select LP Spooler. 3 Select Printers and ...
1 - 8 UNIX PRINTING YL4US_FAX2800MFC4800-FM5.5 Earlier versions of HP/UX use similar procedures to 10.xx users: 1 Enter sam and select Peripheral Devices and then Add Remote Printer (not Networked printer). 2 Enter the following remote printer settings (the other settings do not matter): n Line prin...
1 - 10 UNIX PRINTING YL4US_FAX2800MFC4800-FM5.5 Sun Solaris 2.x Configuration Sun Solaris 2.x uses the lpsystem and lpadmin programs for remote printer configuration: lpsystem -t bsd prnservernamelpadmin -p queue -s prnservername!prnserverserviceaccept queue (not required on newer Solaris systems) e...
UNIX PRINTING 1 - 11 YL4US_FAX2800MFC4800-FM5.5 SCO UNIX Configuration To configure a printer in version Version 5.x of SCO Unix, use the SCOADMIN program. 1 Select Printers and then Print Manager. 2 On the menu select Printer and then Add Remote followed by Unix... 3 Enter the IP address of the pri...
UNIX PRINTING 1 - 13 YL4US_FAX2800MFC4800-FM5.5 Use the CFGTCP command at your OS/400 prompt to add the print server's TCP/IP address to the AS/400 host table. Use the following one-line OS/400 command to create the LPD queue: CRTOUTQ OUTQ(<queuename> RMSTSYS(*INTNETADR) RMTPRTQ(<service>...
1 - 14 UNIX PRINTING YL4US_FAX2800MFC4800-FM5.5 CRTDEVPRT DEVD(BR2) DEVCLS(*LAN) TYPE(3812) MODEL(1) LANATTACH(*IP) PORT(9100) FONT(011) PARITY(*NONE) STOPBITS(1) TRANSFORM(*YES) MFRTYPMDL(*HP5SI) PPRSRC1(*A4) PPRSRC2(*A4) RMTLOCNAME('10.0.0.200') SYSDRVPGM(*HPPJLDRV) TEXT('Arnes Printer') Other Sys...
UNIX PRINTING 1 - 15 YL4US_FAX2800MFC4800-FM5.5 command as shown in the following example: lpc start laser1 Other Sources of Information 1 Visit http://solutions.brother.com/ for more information on network printing. 2 Refer to chapter 12 of this user guide to learn how to configure the IP address o...
2 - 1 TCP/IP PRINTING 2 YL4US_FAX2800MFC4800-FM5.5 2 TCP/IP Printing Printing from Windows ® NT, Windows ® 2000/XP, LAN Server and Warp Server Overview Users of Windows ® NT can print directly to a network-ready Brother printer using the TCP/IP protocol. Microsoft Windows ® NT 3.5x and NT 4.0 users ...
TCP/IP PRINTING 2 - 2 YL4US_FAX2800MFC4800-FM5.5 6 The default name for a Brother print server is usually BRN_xxxxxx (where xxxxxx is the last six digits of the Ethernet address of the print server). Windows ® NT 3.5x/NT 4.0/2000/XP (TCP/IP) Configuration If you have not already done so, install the...
TCP/IP PRINTING 2 - 4 YL4US_FAX2800MFC4800-FM5.5 IPP Printing from Windows ® 2000/XP Clients If you wish to print using the IPP protocol, follow these steps: 1 From the Printers folder select Add Printer. The Add Printer Wizard will now start. Click on Next. 2 Select Network Printer. 3 Click the Con...
2 - 5 TCP/IP PRINTING YL4US_FAX2800MFC4800-FM5.5 Windows ® 2000/XP Printing (Printer Driver already installed) If you have already installed the printer driver and wish to configure it for network printing, follow these steps: 1 Select the printer driver you wish to configure. 2 Select File and then...
TCP/IP PRINTING 2 - 6 YL4US_FAX2800MFC4800-FM5.5 7 Click OK to exit (your NT workstation or server will need to be re-booted). Windows ® NT 4.0 Printing Installing the Brother Peer to Peer Software 1 Start the CD-ROM installation menu program according to the Quick Setup Guide. 2 Select the desired ...
2 - 7 TCP/IP PRINTING YL4US_FAX2800MFC4800-FM5.5 Windows ® NT 4.0 Printing Associating to the Printer You must now create a printer on your Windows ® system using the standard Windows ® printer setup procedure. 1 To do this, go to the Start button, select Settings and then Printers. 2 Double click t...
2 - 9 TCP/IP PRINTING YL4US_FAX2800MFC4800-FM5.5 Windows ® NT 3.5x Printing 1 Go into the Control Panel and run the Network applet. 2 Select Add Software and TCP/IP Protocol and related components. 3 Select the TCP/IP Network Printing Support check box. And then click on the Continue button. (This o...
2 - 11 TCP/IP PRINTING YL4US_FAX2800MFC4800-FM5.5 LAN Server, OS/2 Warp Server Configuration Brother print servers will work with IBM LAN Server, OS/2 Warp Server networks that have IBM TCP/IP V2.0 or later installed on the file server (TCP/IP is supplied as standard with LAN Server V4.0 and later a...
PEER TO PEER PRINTING 3 - 1 3 YL4US_FAX2800MFC4800-FM5.5 3 Peer to Peer Printing How to Print in a Windows ® 95/98/Me Peer to Peer network Overview Microsoft's Windows ® 95/98/Me operating systems feature built-in networking capabilities. These capabilities allow a Windows ® PC to be configured as a...
PEER TO PEER PRINTING 3 - 2 YL4US_FAX2800MFC4800-FM5.5 TCP/IP Printing Our Peer to Peer printing software requires the TCP/IP protocol to be installed on your Windows ® peer-to-peer computers and an IP Address has to be defined for the print server. Refer to your Windows ® documentation for more inf...
3 - 3 PEER TO PEER PRINTING YL4US_FAX2800MFC4800-FM5.5 8 Click the OK button. When prompted you must re-boot your computer. Associating to the printer You must now create a printer on your Windows ® system using the standard Windows ® printer setup procedure. 1 To do this, go the Start button, selec...
PEER TO PEER PRINTING 3 - 4 YL4US_FAX2800MFC4800-FM5.5 You have now finished installing the Peer to Peer Print (LPR) software. Adding a Second Brother LPR Port You do not re-run the install program to add a new Brother LPR port. Instead, press the Start button, select Settings, and open the Printers...
NETBIOS PEER TO PEER PRINTING 4 - 1 4 YL4US_FAX2800MFC4800-FM5.5 4 NetBIOS Peer to Peer Printing How to Print using NetBIOS in Windows ® 95/98/Me/NT/2000/XP, LAN Server and OS/2 Warp Server Overview Brother print server range supports SMB (Server Message Block) over the TCP/IP protocol via the NetBI...
NETBIOS PEER TO PEER PRINTING 4 - 2 YL4US_FAX2800MFC4800-FM5.5 Print Server Configuration In order for this function to work, you must correctly change the DOMAIN name or WORKGROUP name to match that of your network. Once this is done, the print server will appear automatically in your network neigh...
NETBIOS PEER TO PEER PRINTING 4 - 4 YL4US_FAX2800MFC4800-FM5.5 NetBIOS Port Monitor for Windows ® 95/98/Me, NT4.0/2000/XP This software requires the TCP/IP transport protocols to be installed on your Windows ® 95/98/Me, NT4.0/2000/XP computer. To install those protocols refer to your Windows ® docum...
4 - 5 NETBIOS PEER TO PEER PRINTING YL4US_FAX2800MFC4800-FM5.5 Where NodeName is the NetBIOS name of the Brother print server (the default name is usually BRN_xxxxxx , where xxxxxx is the last six digits of the Ethernet address), and ServiceName is the service name for NetBIOS of the print server. B...
NETBIOS PEER TO PEER PRINTING 4 - 6 YL4US_FAX2800MFC4800-FM5.5 7 Select the Brother NetBIOS Port (the port name you assigned in step 6 of the “Installing the Brother NetBIOS Port Monitor” section and press Next. 8 Enter any desired name for the Brother printer and press Next. For example, you could ...
4 - 7 NETBIOS PEER TO PEER PRINTING YL4US_FAX2800MFC4800-FM5.5 You are now ready to print. If necessary, you can share the printer on your PC so that all print jobs are routed through your computer. Adding a Second NetBIOS Print Port 1 You do not need to re-run the installation program to add a new ...
NETBIOS PEER TO PEER PRINTING 4 - 8 YL4US_FAX2800MFC4800-FM5.5 LAN Server/OS/2 Warp Server Configuration As Brother print servers support the SMB protocol over TCP/IP via a NetBIOS interface, you can easily configure your printer to work with an IBM LAN Server and OS/2 Warp Server networks that have...
4 - 9 NETBIOS PEER TO PEER PRINTING YL4US_FAX2800MFC4800-FM5.5 NET USE LPT2: \\BRN_310107\BINARY_P1 Other Sources of Information 1 Visit http://solutions.brother.com/ for more information on network printing. 2 Refer chapter 12 of this user guide to learn how to configure the IP address of the print...
5 - 1 CONFIGURING INTERNET PRINTING FOR WINDOWS ® 5 YL4US_FAX2800MFC4800-FM5.5 5 Configuring Internet Printing for Windows ® Internet Printing Installation Overview Brother's Brother Internet Print (BIP) software, for Windows ® 95/98/ Me/NT4.0, allows a PC user at one location to send a print job to...
5 - 2 CONFIGURING INTERNET PRINTING FOR WINDOWS ® YL4US_FAX2800MFC4800-FM5.5 Brother Internet Print General Information The BIP software is installed using a standard Windows ® 95/98/Me/ NT4.0/2000/XP Installation Wizard. It creates a virtual port on the Windows ® 95/98/Me/NT4.0/2000/XP PC that oper...
CONFIGURING INTERNET PRINTING FOR WINDOWS ® 5 - 3 YL4US_FAX2800MFC4800-FM5.5 Brother Internet Print Configuring the Brother Print Server The print server can be configured using BRAdmin, by using a web browser, or by using the TELNET command. Print Server Configuration Checklist 1 Configure the POP3...
5 - 8 CONFIGURING INTERNET PRINTING FOR WINDOWS ® YL4US_FAX2800MFC4800-FM5.5 9 You will then be asked to enter the port settings for the remote print server: Enter any unique legal Internet E-mail address for the remote print server (for example [email protected]). Note that Internet E-mail addresse...
5 - 10 CONFIGURING INTERNET PRINTING FOR WINDOWS ® YL4US_FAX2800MFC4800-FM5.5 Adding a Second Brother Internet Port You should not re-run the install program to add a new Brother Internet Port. Instead, press the Start button, select Settings, and open the Printers window. Click on the icon of a pri...
5 - 12 CONFIGURING INTERNET PRINTING FOR WINDOWS ® YL4US_FAX2800MFC4800-FM5.5 8 Click the Browse button and select the CD-ROM or network share that contains the appropriate Brother printer driver. 9 Now specify the model name of the printer. 10 If the printer driver that you are installing does not ...
NOVELL NETWARE PRINTING 6 - 1 6 YL4US_FAX2800MFC4800-FM5.5 6 Novell NetWare Printing How to configure Novell NetWare Printing Overview Brother print servers allow NetWare client PCs to print jobs on the same printer as TCP/IP or other network protocol users. All NetWare jobs are spooled through the ...
NOVELL NETWARE PRINTING 6 - 2 YL4US_FAX2800MFC4800-FM5.5 General Information In order to use a Brother print server on a NetWare network, one or more file servers must be configured with a print queue that the print server can service. Users send their print requests to the file server's print queue...
6 - 3 NOVELL NETWARE PRINTING YL4US_FAX2800MFC4800-FM5.5 Creating a NDPS Printer Using NWADMIN for NetWare5 With NetWare 5, Novell has released a new preferred printing system called Novell Distributed Print Services (NDPS). Before the print server can be configured, NDPS must be installed on the Ne...
NOVELL NETWARE PRINTING 6 - 4 YL4US_FAX2800MFC4800-FM5.5 NDPS Broker When NDPS is installed, an NDPS broker is loaded onto the network. One of the Broker services Resource Management Service allows Printer Drivers to be installed onto the server for use with Printer Agents. To add a Printer Driver t...
6 - 5 NOVELL NETWARE PRINTING YL4US_FAX2800MFC4800-FM5.5 Creating a Printer Agent 1 In NetWare Administrator, select object | create | NDPS Printer. Enter the NDPS printer name. 2 If this is a new printer select create A New Printer Agent. 3 If there is already an NDS printer and you are upgrading i...
NOVELL NETWARE PRINTING 6 - 6 YL4US_FAX2800MFC4800-FM5.5 Configuring Netware 3 and NetWare 4 systems Brother's BRAdmin application provides similar functionality to the NetWare PCONSOLE utility (or the NWADMIN utility in NetWare 4.1x or later). To use the BRAdmin application to configure a Brother p...
NOVELL NETWARE PRINTING 6 - 8 YL4US_FAX2800MFC4800-FM5.5 Configuring the Brother Print Server (Queue Server Mode in NDS mode) using BRAdmin 1 Make sure that you logged in as ADMIN in NDS mode. 2 Start BRAdmin. 3 One or more print server services will appear in the list of printers (the default node ...
6 - 9 NOVELL NETWARE PRINTING YL4US_FAX2800MFC4800-FM5.5 e Your queue name will appear in the TREE and Context that you specified. Select the queue and click on Add. The queue name will then be transferred to the Service Print Queues Window. You will be able to see the TREE and Context information a...
NOVELL NETWARE PRINTING 6 - 10 YL4US_FAX2800MFC4800-FM5.5 7 Change context if required and then double click the name of the printer you created in step 3. 8 Click Assignments. 9 Click Add. 10 Change the context if necessary. 11 Select the print queue you created in step 5. 12 Click Configuration an...
6 - 11 NOVELL NETWARE PRINTING YL4US_FAX2800MFC4800-FM5.5 18 Start the appropriate BRAdmin application, and select the correct print server from the list (by default, the node name is BRN_xxxxxx , where xxxxxx is the last six digits of the Ethernet address (MAC address)). 19 Double click the appropr...
6 - 13 NOVELL NETWARE PRINTING YL4US_FAX2800MFC4800-FM5.5 12 Change context if necessary and select the print queue you created. Click OK and then OK again, and then exit NWADMIN. 13 Start the appropriate BRAdmin application, and select the correct print server you wish to configure (by default, the...
NOVELL NETWARE PRINTING 6 - 20 YL4US_FAX2800MFC4800-FM5.5 g Highlight Print Queues Assigned and press ENTER and then INSERT to get a list of available queues. h Highlight the name of the print queue you wish to assign to the remote printer and press ENTER. i The other settings in the menu are not re...
NOVELL NETWARE PRINTING 6 - 22 YL4US_FAX2800MFC4800-FM5.5 Other Sources of Information 1 Visit http://solutions.brother.com/ for more information on network printing. 2 Refer to chapter 12 of this user guide to learn how to configure the IP address of the printer. The same services assigned by NetWa...
APPLETALK (ETHERTALK) TCP/IP PRINTING 7 - 1 7 YL4US_FAX2800MFC4800-FM5.5 7 AppleTalk (EtherTalk) TCP/IP Printing Printing From a Macintosh Overview Brother print servers support the AppleTalk protocol running over Ethernet (also known as EtherTalk). This allows Macintosh users to print at the same t...
APPLETALK (ETHERTALK) TCP/IP PRINTING 7 - 2 YL4US_FAX2800MFC4800-FM5.5 Quick Tips: Macintosh Configuration (OS 8.5 - 9.2) Your Brother Printer is compatible with the standard Apple LaserWriter 8 printer driver (earlier versions of the LaserWriter drivers may crash or cause PostScript errors on large...
7 - 3 APPLETALK (ETHERTALK) TCP/IP PRINTING YL4US_FAX2800MFC4800-FM5.5 computer. Select the Start Here icon, select your language and follow the on-screen instructions for Install Software. Figure 1 Typical Macintosh Installer The above screenshot is from a Brother HL-7050 series printer driver. How...
APPLETALK (ETHERTALK) TCP/IP PRINTING 7 - 4 YL4US_FAX2800MFC4800-FM5.5 How to Select the Print Server (AppleTalk/EtherTalk) Once the print server is connected on your network and the printer is powered on, the Brother print server’s AppleTalk service name (default is BRN_xxxxxx_P1_AT , where xxxxxx ...
7 - 5 APPLETALK (ETHERTALK) TCP/IP PRINTING YL4US_FAX2800MFC4800-FM5.5 program. You should now be able to print from the Macintosh. How to Select the Print Server (TCP/IP) Apple has developed the "Desktop Printer" utility. This can be found from the Apple menu (this is only available from Sy...
APPLETALK (ETHERTALK) TCP/IP PRINTING 7 - 6 YL4US_FAX2800MFC4800-FM5.5 1 Select the Printer (LPR) option and click OK. You will then see the following Figure 4 Selecting the PPD and LPR Configuration 2 At this point we must select the correct PPD file for the printer and also configure the correct L...
7 - 9 APPLETALK (ETHERTALK) TCP/IP PRINTING YL4US_FAX2800MFC4800-FM5.5 How to Select the Print Server (AppleTalk/EtherTalk) After installing the PPD, use the following steps to select the printer driver: 1 Turn the power of the printer ON. 2 Open the Applications folder. 3 Open the Utilities folder....
7 - 11 APPLETALK (ETHERTALK) TCP/IP PRINTING YL4US_FAX2800MFC4800-FM5.5 Changing the Configuration From a Macintosh, the easiest way to change the printer or print server parameters is to use a web browser. Simply connect to the printer using the format: http://ip_address where ip_address is the add...
DLC PRINTING 8 - 1 8 YL4US_FAX2800MFC4800-FM5.5 8 DLC Printing Printing from Windows ® NT or Windows ® 2000 Overview DLC is a simple protocol that is included in Windows NT ® and Windows ® 2000 as standard. It can be used on other operating systems (such as Windows ® 3.x) with the addition of vendor...
DLC PRINTING 8 - 3 YL4US_FAX2800MFC4800-FM5.5 6 Select the Create a new port: option and highlight Hewlett-Packard Network Port. 7 Click Next. 8 A list of available print server MAC addresses (Ethernet addresses) appears in the larger box under Card Address. Select the address of the desired print s...
8 - 4 DLC PRINTING YL4US_FAX2800MFC4800-FM5.5 Windows ® NT 4.0 Printer Setup Log into Windows ® NT with administrative privileges. From the Start menu, select Settings and then Printers. 1 Select Add Printer (If you have already installed a Brother printer driver, double click the printer driver tha...
8 - 6 DLC PRINTING YL4US_FAX2800MFC4800-FM5.5 Configuring DLC on Other Systems To use DLC on other network systems, you will generally need vendor-supplied software. Typically such software will support the Brother print servers. Follow the vendor's instructions to install the DLC protocol on your s...
LAT NETWORK CONFIGURATION 9 - 1 9 YL4US_FAX2800MFC4800-FM5.5 9 LAT Network Configuration Printing from DEC LAT Systems Overview Brother print servers are equipped with the LAT protocol. If you are already familiar with configuring DEC servers or compatible terminal servers in your network, you can u...
9 - 2 LAT NETWORK CONFIGURATION YL4US_FAX2800MFC4800-FM5.5 VMS LAT Host Configuration The configuration process requires that you have system manager privileges. Before starting the LAT configuration process, you must first make sure that LAT has been started on your system. If you are currently usi...
9 - 4 LAT NETWORK CONFIGURATION YL4US_FAX2800MFC4800-FM5.5 DEFINE/FORM DEFAULT/NOTRUNCATE/NOWRAP If you are defining a new form, be sure to specify STOCK=DEFAULT (unless you are using a special stock) and initialize the queue with the DEFAULT=FORM option. For example, to create a form called PCL for...
LAT NETWORK CONFIGURATION 9 - 5 YL4US_FAX2800MFC4800-FM5.5 PATHWORKS for DOS Configuration To configure the print server for PATHWORKS for DOS: 1 Create a VMS queue as previously described. 2 Run PCSA_MANAGER on the VMS system. a Type MENU to get the PCSA menu. b Select SERVICE OPTIONS c Select ADD ...
9 - 8 LAT NETWORK CONFIGURATION YL4US_FAX2800MFC4800-FM5.5 DECprint Supervisor Configuration Notes If you want to use the Brother print server with the DECprint Supervisor software, you must have the DCPS-Open option in order to support Brother printers (you may also need to modify the DCPS device c...
9 - 10 LAT NETWORK CONFIGURATION YL4US_FAX2800MFC4800-FM5.5 6 You now need to establish a host-initiated connection. For example: lcp -h tty05:BRN_310107:P1 7 Make the spool directory as shown in the following example: cd /usr/spoolmkdir lp1chown daemon lp1 Again substitute your actual printer name ...
BANYAN VINES NETWORK CONFIGURATION 10 - 1 10 YL4US_FAX2800MFC4800-FM5.5 10 BANYAN VINES Network Configuration Printing from Banyan Vines Systems Overview Brother print servers allow printers to be shared on a Banyan VINES network. Users on client PCs send their jobs to any VINES file server running ...
10 - 2 BANYAN VINES NETWORK CONFIGURATION YL4US_FAX2800MFC4800-FM5.5 File Server User Console The first step in the configuration process is to configure the file server so that the Brother print server can log into the Banyan VINES network. To do this, you will need to configure a StreetTalk user n...
BANYAN VINES NETWORK CONFIGURATION 10 - 3 YL4US_FAX2800MFC4800-FM5.5 8 Press ESCAPE twice to return to the main menu. File Server Queue Configuration You must now configure the queue(s) on the Banyan VINES file servers. Print queues are one of several different types of services that are available o...
10 - 4 BANYAN VINES NETWORK CONFIGURATION YL4US_FAX2800MFC4800-FM5.5 get the Alert list screen. Otherwise, press F10 to accept the defaults (not applicable for VINES 6.xx). 11 When you get the Add A Destination screen, use the arrow keys to select PCPrint and press ENTER. 12 When you get the Destina...
BANYAN VINES NETWORK CONFIGURATION 10 - 5 YL4US_FAX2800MFC4800-FM5.5 Print Server Configuration Using BRAdmin The last step is to add the StreetTalk login name to the Brother print server and to associate the file server queue with one of the services on the print server. The procedure is as follows...
WEB BASED MANAGEMENT 11 - 1 11 YL4US_FAX2800MFC4800-FM5.5 11 Web Based Management How to use a Web Browser to manage your Device Overview A standard Web Browser (we recommend Netscape Navigator version 4.0 or later/Microsoft Internet Explorer version 4.0 or later) can be used to manage your printer ...
11 - 2 WEB BASED MANAGEMENT YL4US_FAX2800MFC4800-FM5.5 5 You can also use the BRAdmin application to manage the printer and its network configuration. How to connect to your printer using a Browser Type http://printer’s IP Address / into your browser (you can also use the NetBIOS name of the print s...
TCP/IP CONFIGURATION 12 - 1 12 YL4US_FAX2800MFC4800-FM5.5 12 TCP/IP Configuration Assigning TCP/IP Information Overview The TCP/IP protocol requires that each device on the network have it's own unique IP address. Use the following information to learn about IP address configuration. By default Brot...
TCP/IP CONFIGURATION 12 - 3 YL4US_FAX2800MFC4800-FM5.5 Using BRAdmin and the IPX/SPX Protocol to set the IP address If your PC is using the Novell Netware Client software and is using the IPX/SPX protocol, do the following: 1 Select IPX/SPX filter in the left frame of the main window. 2 Check the pr...
TCP/IP CONFIGURATION 12 - 5 YL4US_FAX2800MFC4800-FM5.5 Using DHCP to Configure the IP address The Dynamic Host Configuration Protocol (DHCP) is one of several automated mechanisms for IP address allocation. If you have DHCP Server in your network (typically a Unix, Windows ® NT/2000 or Novell Netwar...
12 - 6 TCP/IP CONFIGURATION YL4US_FAX2800MFC4800-FM5.5 arp -s ipaddress ethernetaddress Where ethernetaddress is the Ethernet address (MAC address) of the print server and ipaddress is the IP address of the print server. For example: Windows® Systems Windows ® Systems require the colon ":" c...
TCP/IP CONFIGURATION 12 - 7 YL4US_FAX2800MFC4800-FM5.5 ipaddress is the IP address of the print server. For example, ping 192.189.207.2 . Using RARP to Configure the IP Address The Brother print server’s IP address can be configured using the Reverse ARP (rarp) facility on your host computer. This i...
12 - 8 TCP/IP CONFIGURATION YL4US_FAX2800MFC4800-FM5.5 Using BOOTP to Configure the IP Address BOOTP is an alternative to rarp that has the advantage of allowing configuration of the subnet mask and gateway. In order to use BOOTP to configure the IP address make sure that BOOTP is installed and runn...
13 - 1 TROUBLESHOOTING 13 YL4US_FAX2800MFC4800-FM5.5 13 Troubleshooting Overview This chapter describes procedures for troubleshooting problems you may encounter with a Brother print server, it is divided into the following sections: 1 Installation Problems 2 Intermittent Problems 3 Protocol-Specifi...
13 - 3 TROUBLESHOOTING YL4US_FAX2800MFC4800-FM5.5 Brother print servers have three LEDs. These can be used to diagnose problems. n L- LED (green): Link activityThis LED is on if there is a valid connection to the network (either 10BaseT or 100BaseTX). It is off if no network is detected. n F-LED (or...
TROUBLESHOOTING 13 - 4 YL4US_FAX2800MFC4800-FM5.5 Intermittent Problems If the print server and printer start up OK, but you intermittently have problems printing, check the following: 1 If you can print small jobs but large graphics jobs are distorted or incomplete, make sure that you have adequate...
13 - 5 TROUBLESHOOTING YL4US_FAX2800MFC4800-FM5.5 TCP/IP Troubleshooting If you are using TCP/IP and cannot print to the print server and you have checked the hardware and network as described in the previous steps, then check the following: Turning off the printer and then again,Deleting and recrea...
TROUBLESHOOTING 13 - 6 YL4US_FAX2800MFC4800-FM5.5 UNIX Troubleshooting 1 Make sure that the /etc/printcap file (if applicable) is typed in correctly. In particular, look for missing ":" and "\" characters, because a small error anywhere in the file can have major consequences. Also c...
TROUBLESHOOTING 13 - 8 YL4US_FAX2800MFC4800-FM5.5 Windows ® NT/LAN Server (TCP/IP) Troubleshooting If you are having trouble printing with Windows ® NT or LAN Server, check the following: 1 Make sure that TCP/IP and TCP/IP print service are installed and running on the Windows ® NT system or the LAN...
13 - 11 TROUBLESHOOTING YL4US_FAX2800MFC4800-FM5.5 Windows ® 95/98/Me/2000/XP IPP Troubleshooting Want to use a different Port number other than 631If you are using Port 631 for IPP printing, you may find that your firewall may not let the print data through. If this is the case, use a different por...
TROUBLESHOOTING 13 - 12 YL4US_FAX2800MFC4800-FM5.5 Novell NetWare Troubleshooting If you cannot print from NetWare and you have checked the hardware and network as described in the previous steps, first verify that the Brother print server is attached to the server queue by going to PCONSOLE, select...
13 - 13 TROUBLESHOOTING YL4US_FAX2800MFC4800-FM5.5 6 If you are using DOS CAPTURE statement and losing portions of your print job, try setting the TIMEOUT parameter in your CAPTURE statement to a higher value (at least 50 seconds for Windows ® ). AppleTalk Troubleshooting If you cannot print from an...
TROUBLESHOOTING 13 - 14 YL4US_FAX2800MFC4800-FM5.5 LAT Troubleshooting If you cannot print from a VMS system and you have checked the hardware and network as described in the previous steps, then check the following (note that it is always a good idea to try creating a new queue with a different LAT...
TROUBLESHOOTING 13 - 16 YL4US_FAX2800MFC4800-FM5.5 13 If you can print successfully from PATHWORKS using DOS but have problems printing from Windows ® , try increasing the Device Not Selected and Transmission Retry timeouts from the Windows ® Printer Manager (select Printer Setup, select the desired...
APPENDIX A - 1 A YL4US_FAX2800MFC4800-FM5.5 A Appendix Appendix A General Information You can change the configuration of your print server using any of the following methods. • Brother BRAdmin application for Windows 95/98/Me/NT4/2000/ XP • Brother Web BRAdmin application for IIS* server• HTTP (usi...
A - 2 APPENDIX YL4US_FAX2800MFC4800-FM5.5 HTTP (Recommended) Use your favorite web browser to connect to the Brother print server. This will allow you to configure printer and/or print server parameters. WebJetAdmin Brother's print server range is HP WebJetAdmin compatible. TELNET To connect to the ...
APPENDIX A - 3 YL4US_FAX2800MFC4800-FM5.5 Using Services General A service is a resource that can be accessed by computers that wish to print to the Brother print server. The Brother print server provides the following predefined services (do a SHOW SERVICE command in the Brother print server remote...
A - 4 APPENDIX YL4US_FAX2800MFC4800-FM5.5 Reloading the Print Server Firmware General The firmware on the print server is stored in flash memory. This means that you can upgrade the firmware by downloading the appropriate update file. To get the latest firmware update, visit the Brother Solutions we...
APPENDIX A - 5 YL4US_FAX2800MFC4800-FM5.5 Reloading firmware using BRAdmin The BRAdmin application can be used to easily re-program your Brother print server. 1 Start BRAdmin. 2 Highlight the appropriate print server. Then press select the Control menu and choose Load Firmware. You can select more t...
A - 6 APPENDIX YL4US_FAX2800MFC4800-FM5.5 Reloading process The Data LED on the printer control panel will blink during the firmware file loading process. During programming process, the backlight on the printer’s LCD goes off, and Erase xxxxxx and Write xxxxxx will be indicated alternately on the L...
APPENDIX A - 7 YL4US_FAX2800MFC4800-FM5.5 Reloading using the FTP Protocol from a command prompt By specifying the print server PASSWORD AS THE USERNAME when logging on, it becomes possible to upgrade the firmware of the print server or printer (if supported). The following example assumes that the ...
INDEX I - 1 HL7050_US_NUG.FM5.5 Index A AIX ...................................... 1-3 AIX 4.0 ................................ 1-8 AppleTalk ... 7-1 , 7-4 , 7-9 , 13-2 , 13-13 ARP ...................1-2 , 12-1 , 12-5 B BANYAN VINES ............... 10-1 Banyan VINES ................ 13-16 Berkeley U...
Brother Manuals
-
Brother SC6600
User Manual
-
Brother SC9500
User Manual
-
Brother FAX-270MC
User Manual
-
Brother FAX190
User Manual
-
Brother MFC 6550MC
User Manual
-
Brother NB-60
User Manual
-
Brother MFC-4500
User Manual
-
Brother NB-80C
User Manual
-
Brother FAX-290MC
User Manual
-
Brother MFC-4550
User Manual
-
Brother FAX170
User Manual
-
Brother FAX 3550
User Manual
-
Brother HL-5250DN
User Manual
-
Brother ULT2003D
User Manual
-
Brother HL-5280DW
User Manual
-
Brother GX-6750
User Manual
-
Brother GX-6750
Manual
-
Brother AX-325
User Manual
-
Brother AX-325
Manual
-
Brother FAX775
User Manual