Brother HL-1240- Manuals

Step 4 Using a swab and alcohol clean the corona wire. Step 5 Remove the two screws holding the cleaning brush. (See Photo 4) Photo 4 Step 9 Reinstall the contact plate onto the cleaning brush. (See Photo 7) Photo 7 Step 10 Remove the “C” clip from the drum axle onthe non gear side. (See Photo 8) Ph...

Step 11 Slide the drum axle from the drum. Usinga small flat blade screwdriver lift the clean-ing brush contact to slide the drum axleout from the end of the drum unit. (See Photo 9) Photo 9 Step 12 Lift the drum out from the gear side. (See Photo 10) NOTE: The drum will come into four parts. On the...

4 Brother HL-1240 Drum Unit Technical Instructions E-mail: [email protected] Website: www.futuregraphicsllc.com C A RT R I D G E M A R K E T OV E RV I E W O E M C A R T R I D G E # O E M S TAT E D PA G E Y I E L D O E M C A R T R I D G E L I S T P R I C E C O M PAT I B L E C A R T R I D G E R E TA I...