Brother FAX570- Manuals

4 Do not use paint thinner, benzene, alcohol or any other organic solvents to clean the machine. Doing so may cause damage to the surface finish. Use a soft, dry cloth to clean the machine. Do not put any heavy objects or objects containing water on top of the machine. If water or any foreign object...

5 STEP 1 STEP 2 STEP 3 For W indows ® Fo r Macintosh ® STEP 4 Intr oduction Getting starte d Ref erence Installin g the software Label Over view „ The Machine • The machine is a precision machine. Do not drop, hit or otherwise bang the machine. • Do not lift the machine by the DK Roll compartment co...

7 STEP 1 STEP 2 STEP 3 Fo r Windows ® For Macint osh ® STEP 4 Getting started Refer ence Installing th e soft ware Label Overview Intr oduction Getting started Check that the package contains the following before using the printer. If any item is missing or damaged, contact your Brother dealer. QL-5...

STEP1 Getting started 8 Connect the power cord to the QL-570/580N and then plug the power cord into a electrical outlet. • Check that the electrical outlet is 220V-240V AC before plugging the power cord. • Unplug the power cord from the electrical outlet after you have finished using the QL-570/580N...

9 STEP 1 STEP 2 STEP 3 Fo r Windows ® For Macint osh ® STEP 4 Getting started Refer ence Installing th e soft ware Label Overview Intr oduction Press the ON/OFF button ( ) to turn on the Brother QL-570/580N on. Then, press the FEED button for more than one second to remove the protection sheet. 1 Pr...

STEP1 Getting started 10 3 Thread the end of the DK Roll into the slot until it aligns to the area shown on the right. Align the end of the roll with the upright edge of the label output slot. 4 Close the DK Roll compartment cover. When you press the ON/OFF button ( ) to turn the Brother QL-570/580N...

11 STEP 1 STEP 2 STEP 3 Fo r Windows ® For Macint osh ® STEP 4 Getting started Refer ence Installing th e soft ware Label Overview Intr oduction RS-232C cable and Network cable are not standard accessories. Choose the appropriate cable for your interface. • USB cable Use the enclosed interface cable...

13 STEP 1 STEP 2 STEP 3 For Wi ndows ® For M acintosh ® STEP 4 Getting start ed Re ference Installin g the software Label Over view Introdu ction Installing the software The printer names in the following screens may differ from your printer name. The procedure for installing them varies depending o...

STEP2 Installing the software 14 For details of software, see Î "User's Guide (PDF)". You can find the User's Guide (PDF) by clicking [Start]-[All Programs (Programs)]- [Brother P-touch]-[Manuals]-[QL-570 User's Guide]. 5 Put a check mark in the box to install the Add-in and click [Next]. Ma...

15 STEP 1 STEP 2 STEP 3 For Wi ndows ® For M acintosh ® STEP 4 Getting start ed Re ference Installin g the software Label Over view Introdu ction This section explains how to install P-touch Editor 5.0, Fonts, Auto Format Templates, Clip Art, and the printer driver. After the driver is installed the...

17 STEP 1 STEP 2 STEP 3 For Wi ndows ® For M acintosh ® STEP 4 Getting start ed Re ference Installin g the software Label Over view Introdu ction Installing the Software The printer names in the following screens may differ from your printer name. The procedure for installing them varies depending o...

STEP2 Installing the software 18 5 Put a check mark in the box to install the Add-in and click [Next]. Make sure that all Microsoft ® Office applications are closed. For details of the Add-in, see the "User's Guide (PDF)". 6 Click [OK]. Then, choose your connection method and click [Next]. „...

19 STEP 1 STEP 2 STEP 3 For Wi ndows ® For M acintosh ® STEP 4 Getting start ed Re ference Installin g the software Label Over view Introdu ction „ For Network interface cable users „ For shared network printer users 7-1 Choose Brother Peer-to-Peer Network Printer, and then click [Next]. Check that ...

21 STEP 1 STEP 2 STEP 3 For Wi ndows ® For M acintosh ® STEP 4 Getting start ed Re ference Installin g the software Label Over view Introdu ction „ Installing the BRAdmin Light configuration utility for Windows BRAdmin Light is a utility for the initial setup of Brother network connected devices. It...

STEP2 Installing the software 22 2 Double-click the unconfigured device. The default password is "access." 3 Choose STATIC for the Boot Method. Enter the IP Address, Subnet Mask and Gateway, and then click [OK]. 4 The address information will be saved to the printer.

23 STEP 1 STEP 2 STEP 3 For Wi ndows ® For M acintosh ® STEP 4 Getting start ed Re ference Installin g the software Label Over view Introdu ction This section explains how to install P-touch Editor 5.0, Fonts, Auto Format Templates, Clip Art, and the printer driver. After the driver is installed the...

25 STEP 1 STEP 2 STEP 3 For Wi ndows ® For M acintosh ® STEP 4 Getting start ed Re ference Installin g the software Label Over view Introdu ction „ For Network interface cable users (Simple Network Configuration) 9-1 Click [Add]. (Mac OS ® X 10.3.9) Make the selection shown right. (Mac OS ® X 10.4.x...

STEP2 Installing the software 26 For details on software, see the P-touch Editor Help. „ Installing the BRAdmin Light configuration utility for Mac ® BRAdmin Light is a utility for the initial setup of Brother network connected devices. It can also search for Brother products on your network, view t...

27 STEP 1 STEP 2 STEP 3 For Wi ndows ® For M acintosh ® STEP 4 Getting start ed Re ference Installin g the software Label Over view Introdu ction 2 When the installation is completed and the message “The Software was successfully installed.” is displayed, click [Close]. The installation of BRAdmin L...

29 STEP 1 STEP 2 STEP 3 Fo r Windows ® For Macint osh ® STEP 4 Getting started Refer ence Installing th e soft ware Label Over view In troduction Label Overview Here are the sample labels that you can create with the Brother QL-570/580N. There is a variety of labels to choose from. Go to Page 30 for...

STEP3 Label Overview 30 This section describes the general procedure for creating labels. „ Connect to the PC Remove labels from the label output slot to prevent paper jams. „ Use the machine without connecting to the PC (QL-580N only) 1 Create the label data. Enter text directly using P-touch Edito...

31 STEP 1 STEP 2 STEP 3 Fo r Windows ® For Macint osh ® STEP 4 Getting started Refer ence Installing th e soft ware Label Over view In troduction This section explains how to start P-touch Editor Help for Windows ® and Mac ® . The following is the example for Windows Vista ® . The printer names in t...

STEP3 Label Overview 32 The following is the example for Mac OS ® X 10.4.9. The printer names in the following screens may differ from your printer name. „ Start from New/Open dialog In the New/Open dialog, click "Help-How To." „ Start from P-touch Editor To start the P-touch Editor Help, cl...

33 STEP 1 STEP 2 STEP 3 STEP 4 Getting started Refer ence Label Over view In troduction For W indows ® Fo r Macintosh ® Installin g the software Reference „ Definition of LED Lamp The LED lamp on the Brother QL printer indicates the current operating condition. Lamp Condition Not lit Power is OFF. G...

STEP4 Reference 34 Reference Maintenance of the machine must be done as required. However, some environments require that maintenance must be done more frequently (e.g. in dusty conditions). „ Print head maintenance The DK Roll (thermal recording paper type) used with the machine is designed to clea...

STEP4 Reference 36 Reference If the problems occur while using this machine, the following may help you to solve the problems. „ Potential types of problems Problem Solution The QL printer does not print, or a printing error is received. • Is the cable loose? Check that the cable is connected secure...

STEP4 Reference 38 Reference „ Product specifications „ Operating environment *1 The computer should meet the Microsoft ® recommendations for the OS installed. *2 Required available space when installing the software with all of the options. *3 The RS-232C interface is required when printing with ES...

39 STEP 1 STEP 2 STEP 3 STEP 4 Getting started Refer ence Label Over view In troduction For W indows ® Fo r Macintosh ® Installin g the software Brother recommends the use of genuine Brother accessories with the Brother QL-570/580N. The use of other products may affect the print quality or may damag...

STEP4 Reference 40 „ Warranty & Repair For details about warranty on your Brother Product, the details are listed on the following link: www.brother.com.au under Warranty. For warranty service (repair) of your Brother product you will need to retain a copy of your sales docket and contact the Su...