Brother DCP-750CW- Manuals

Getting Started 3 Control panel 1 Number of Copies key 2 Menu keys 3 Start keys 4 Stop/Exit key 5 On/Off key 6 Ink Management key 7 Scan key 8 PhotoCapture key 9 Warning LED 10 LCD (Liquid Crystal Display) For the details of the control panel, see Control panel overview in Chapter 1 of the User’s Gu...

Setting Up the Machine 4 STEP1 1 1 Removing the protective parts 1 Remove the protective tape and film covering the scanner glass. 2 Remove the foam bag containing the ink cartridges from on top of the paper tray. Improper Setup DO NOT connect the interface cable. Connecting the interface cable is d...

Setting Up the Machine 5 3 Fan the stack of paper well to avoid paper jams and misfeeds. 4 Gently put the paper into the paper tray print side down and top edge first.Check that the paper is flat in the tray. 5 Gently adjust the paper side guides with both hands to fit the paper. Make sure that the ...

Setting Up the Machine 6 STEP1 3 Connecting the power cord 1 Connect the power cord. Improper Setup DO NOT connect the interface cable. Connecting the interface cable is done during the software installation process. Warning The machine must be fitted with an earthed plug. Note The control panel war...

Setting Up the Machine 7 5 Installing the ink cartridges Warning If ink gets in your eyes, wash them out with water at once, and if irritation occurs consult a doctor. 1 Make sure that the power is turned on.The LCD shows: No Cartridge BlackYellow Cyan Magenta 2 Open the ink cartridge cover (1). 3 P...

Setting Up the Machine 8 STEP1 6 Install each ink cartridge in the direction of the arrow on the label.Take care to match the colour of the lock release lever (1) with the cartridge colour (2), as shown in the diagram below. 7 Lift each lock release lever and gently push it until it clicks, and then...

Setting Up the Machine 9 6 Print quality check 1 After the cleaning cycle is finished, the LCD shows: Set Paper and Press 2 Make sure paper is loaded in the paper tray.Press Colour Start . The machine starts printing the Print Quality Check Sheet (only during initial ink cartridge installation). 3 C...

Setting Up the Machine 10 STEP1 7 Setting the LCD Contrast You can adjust the LCD contrast for a sharper and more vivid display. If you are having difficulty reading the LCD, try changing the contrast setting. 1 Press Menu . 2 Press a or b to choose General Setup . Press OK . 3 Press a or b to choos...

Setting Up the Machine 11 7 Press a repeatedly to enter the two digits for the hour in 24-hour format, and then press c to next. Date/Time Time:15:XX (e.g. Enter 1 5 for 3:00 P.M.) 8 Press a repeatedly to enter the two digits for the minutes, and then press OK . Date/TimeTime: 15:25 (e.g. Enter 1 5 ...

Supplied CD-ROM ‘MFL-Pro Suite’ 12 1 Supplied CD-ROM ‘MFL-Pro Suite’ Windows ® Install MFL-Pro Suite You can install the MFL-Pro Suite software and multifunction drivers. Install Other Drivers or Utilities You can install additional MFL-Pro Suite software utilities, install without PaperPort ® SE, o...

Installing the Driver & Software 14 STEP2 W indow s ® US B Windows ® 1 For USB Interface Users (For Windows ® 98/98SE/Me/2000 Professional/XP/XP Professional x64 Edition) Important Make sure that you have finished the instructions from Step 1 Setting Up the Machine on page 4 through 11. Note • P...

Installing the Driver & Software 21 Windows ® W ind ows ® Wi rel ess Ne tw o rk For Wireless Network Users (For Windows ® 98/98SE/Me/2000 Professional/XP/XP Professional x64 Edition in infrastructure mode) Connect your wireless machine and wireless network together: install the printer driver in...

Installing the Driver & Software 22 STEP2 Windows ® W ind ows ® Wi rel ess Ne tw o rk Confirm your network environment The setup process will be different depending on your network environment. „ Installation using SecureEasySetup™. If your wireless access point (A) supports SecureEasySetup ™ , ...

Installing the Driver & Software 23 Windows ® W ind ows ® Wi rel ess Ne tw o rk Using the SecureEasySetup™ software to configure your machine for a wireless network Important Make sure that you have finished the instructions from Step 1 Setting Up the Machine on page 4 through 11. The SecureEasy...

Installing the Driver & Software 25 Windows ® W ind ows ® Wi rel ess Ne tw o rk Using the Setup Wizard from the control panel LAN menu for wireless network configuration Important Make sure that you have finished the instructions from Step 1 Setting Up the Machine on page 4 through 11. 1 Write d...

For Network Users 45 How to set the machine’s network settings to wireless LAN or wired LAN To connect your Brother machine to a wireless or wired network you must configure the machine from the machine’s control panel for the network type you are using. For wireless LAN On your machine, press Menu ...

Consumables 47 1 Replacement consumables When the time comes to replace ink cartridges, an error message will be indicated on the LCD. For more information about the ink cartridges for your machine, visit http://solutions.brother.com or contact your local Brother re-seller. Ink cartridge Black Yello...