Brother DCP-130C- Manuals

Page 2 - Symbols used in this guide

Symbols used in this guide Warning Caution Improper Setup Warnings tell you what to do to prevent possible personal injury. Cautions specify procedures you must follow or avoid to prevent possible damage to the machine or other objects. Improper Setup icons alert you to devices and operations that a...

Page 3 - Table of Contents; Getting Started; STEP1 –; Setting Up the Machine; STEP2 –; Installing the Driver & Software; Windows; Consumables

Table of Contents 1 Getting Started Carton components ...................................................................................................................................... 2Control panel ...................................................................................................

Page 4 - Carton components

Getting Started 2 1 Carton components Carton components may vary from one country to another.Save all packing materials and the carton in case for any reason you must ship your machine. A USB interface cable is not a standard accessory. To ensure safe operation the supplied plug must be inserted o...

Page 5 - Control panel; Note

Getting Started 3 Control panel 1 Copy keys 2 OK key 3 Navigation keys 4 Stop/Exit key 5 Start keys 6 On/Off key 7 Ink Management key 8 Scan key 9 PhotoCapture key 10 Menu key 11 LCD (Liquid Crystal Display) 12 Warning LED For the details of the control panel, see Control panel overview in Chapter 1...

Page 6 - Removing the protective; Improper Setup; Loading paper

Setting Up the Machine 4 STEP1 1 1 Removing the protective parts 1 Remove the protective tape and film covering the scanner glass. Improper Setup DO NOT connect the interface cable. Connecting the interface cable is done during the software installation process. 2 Loading paper You can load up to 10...

Page 8 - Connecting the power cord; Choosing your language; Select Language; English

Setting Up the Machine 6 STEP1 3 Connecting the power cord 1 Connect the power cord. Improper Setup DO NOT connect the interface cable. Connecting the interface cable is done during the software installation process. Warning The machine must be fitted with an earthed plug. Note The control panel war...

Page 9 - Installing the ink cartridges

Setting Up the Machine 7 5 Installing the ink cartridges Warning If ink gets in your eyes, wash them out with water at once, and if irritation occurs consult a doctor. 1 Make sure that the power is turned on.The LCD shows: No Cartridge 2 Open the ink cartridge cover (1). 3 Pull all the lock release ...

Page 10 - Preparing System

Setting Up the Machine 8 STEP1 6 Install each ink cartridge in the direction of the arrow on the label.Take care to match the colour of the lock release lever (1) with the cartridge colour (2), as shown in the diagram below. 7 Lift each lock release lever and push it until it clicks, and then close ...

Page 11 - Print quality check

Setting Up the Machine 9 6 Print quality check 1 After the cleaning cycle is finished, the LCD shows: Set Paper and q Press Start 2 Make sure paper is loaded in the paper tray.Press Colour Start . The machine starts printing the Print Quality Check Sheet (only during initial ink cartridge installati...

Page 12 - Setting the LCD contrast; Setting the date and time

Setting Up the Machine 10 STEP1 7 Setting the LCD contrast You can adjust the LCD contrast for a sharper and more vivid display. If you are having difficulty seeing the LCD from your position, we recommend the following contrast setting for improved viewing. 1 Press Menu . 2 Press a or b to choose 0...

Page 13 - Now go to

Setting Up the Machine 11 9 Press Stop/Exit . Note If you want to start again, press Stop/Exit to go back to Step 1 . To confirm the current date and time, print out the Users Settings Report. (See “Printing reports” in Chapter 1 of the User's Guide.) Now go to Go to Supplied CD-ROM ‘MFL-Pro Suite’ ...

Page 14 - Macintosh

Supplied CD-ROM ‘MFL-Pro Suite’ 12 1 Supplied CD-ROM ‘MFL-Pro Suite’ Windows ® Install MFL-Pro Suite You can install the MFL-Pro Suite software and multifunction drivers. Install Other Drivers or Utilities You can install additional MFL-Pro Suite software utilities, install without PaperPort ® SE, o...

Page 15 - For USB Interface Users

Installing the Driver & Software 13 STEP2 Follow the instructions on this page for your operating system and interface.For the latest drivers and documentations and to find the best solution for your problem or question, access the Brother Solutions Center directly from the driver or visit http:...

Page 16 - Important

Installing the Driver & Software 14 STEP2 W in dow s ® US B Windows ® 1 For USB Interface Users(For Windows ® 98/98SE/Me/2000 Professional/XP/XP Professional x64 Edition) Important Make sure that you have finished the instructions from Step 1 Setting Up the Machine on pages 4-11. Note • Please c...

Page 22 - Replacement consumables; Ink cartridge

Consumables 20 1 Replacement consumables When the time comes to replace ink cartridges, an error message will be indicated on the LCD. For more information about the ink cartridges for your machine, visit http://solutions.brother.com or contact your local Brother re-seller. Ink cartridge Black Yello...