Briggs & Stratton BC2401H - Manuals

Page 2 - laws apply on federal lands.; VIBRATION; SOUND; IN THE INTEREST OF SAFETY; The Engine Exhaust from this product contains chemicals known

Part No. 500264 Form No. F101001A WARNING: DO NOT 1. DO NOT run engine in an enclosedarea. Exhaust gases contain carbonmonoxide, an odorless and deadly poison. 2. DO NOT place hands or feet nearmoving or rotating parts. 3. DO NOT store, spill or use gasolinenear an open flame, or devices such as ast...

Page 3 - PUT OIL IN ENGINE BEFORE STARTING.; GENERAL SAFETY; Literature; PACKING CHECKLIST; Engine

Part No. 500264 Form No. F101001A Page 3 of 12 For your safety and the safety of others, these directions should be followed: Do not operate this machine without first readingowner's manual and engine manufacturer's manual. Use of Eye and Breathing protection is recom- mended when using this machine...

Page 4 - INSTRUCTION LABELS; CONTROLS; Throttle Control; Manual; ENGINE LABELS; Honda

Part No. 500264 Form No. F101001A Page 4 of 12 INSTRUCTION LABELS CONTROLS Throttle Control Owner's Manual Owner's Manual 500264 Warranty Card Warranty Card 400972 EU Declaration of Conformity & EU Distributor List 500265 EU Declaration of Conformity & EU Distributor List Literature Checklis...

Page 5 - ENGINE SPEED: Controlled by throttle lever on the handle.; To engage the blade, depress; CUTTING OPERATION; OPERATION; STARTING; BLADE CLUTCH; The best performance is achieved when cutting in dry; CLEARING A CLOGGED CUTTING DECK:

Part No. 500264 Form No. F101001A ENGINE: See engine manufacturer’s instructionsfor type and amount of oil and gasoline used. Engine must be level when checking and filling oil andgasoline. ENGINE SPEED: Controlled by throttle lever on the handle. FUEL VALVE: Move fuel valve to "ON" position...

Page 6 - PARTS DRAWING

Part No. 500264 Form No. F101001A Page 6 of 12 PARTS DRAWING 1 8 BC2401HE, BC2401H, BC2401IC

Page 9 - continued; STORAGE; SHIFT LEVER; CUTTING HEIGHT ADJUSTMENT

Part No. 500264 Form No. F101001A Page 9 of 12 OPERATION continued 1 6 Never store engine indoors or in enclosed poorly ventilated areas with fuel in tank, where fuel fumes may reach an openflame, spark or pilot light, as on a furnace, water heater, clothesdryer or other gas appliance.If engine is t...

Page 10 - MAINTENANCE; Blade, and drive belts are normal wear items.; BELT REPLACEMENT; Blade Drive Belt

Part No. 500264 Form No. F101001A When replacing one belt the other should be inspected for wear andreplaced if worn. It is good practice to change both belts when eitheris worn beyond use. Use only original equipment belts for replace-ment. Billy Goat uses only premium quality, kevlar corded and co...

Page 11 - Maintenance Schedule; MAINTENANCE HISTORY; Service Performed; BLADE DRIVE BELT TENSION ADJUSTMENT

Part No. 500264 Form No. F101001A Page 11 of 12 MAINTENANCE continued 1 7 TransaxleDrive Belt Blade Drive Belt Fig. 3 Belt in top grooveof engine pulley Belt in bottom grooveof engine pulley Engine (See Engine Manual) Check for excessive vibration Inspect for loose parts Maintenance Operation Follow...

Page 12 - Engine Service and Warranty; Contact your nearest engine manufacturer's authorized; Serial Plate; Solution; TROUBLESHOOTING; CLUTCH ADJUSTMENT

Part No. 500264 Form No. F101001A Page 12 of 12 Purchasedfrom PurchaseDate Engine Service and Warranty Contact your nearest engine manufacturer's authorized servicing dealer. 22.1 2 1 Serial Plate Record your machine model, serial number anddate-of-purchase and where purchased 2 2 min -1 Operator BI...