Boss Audio Systems MR1620W - Manuals

Page 2 - CONTENTS; FLUSH MOUNT; Loading a disc; Please note that if this infor; FRONT AUDIO OUTPUTS; REAR AUDIO OUTPUTS; OPTIONAL POWER AMPLIFIER; It is very important; Fig 1; Remove transport screws; Figure 2; Apply plastic film to seal screw holes; Figure 3; Bending the support tabs; Before installing your new; RDS EON function setting; Flush mount; Mounting hardware for main unit:; Figure 6

3. Push the panel mechanism backinto the housing so it is not protruding.To do so, push the BOTTOM EDGEdown straight into the unit – do notlift it! (Figure 7) . 4. Immediately place the front panelin its protective case for safe andclean storage (Figure 8) . EON EON EON CONTENTS MR1620W • MR1620S Us...

Page 3 - CD; page

3. Push the panel mechanism backinto the housing so it is not protruding.To do so, push the BOTTOM EDGEdown straight into the unit – do notlift it! (Figure 7) . 4. Immediately place the front panelin its protective case for safe andclean storage (Figure 8) . EON EON EON CONTENTS MR1620W • MR1620S Us...

Page 5 - Dirt or foreign substances can be removed with a clean, dry cloth.

3. Push the panel mechanism backinto the housing so it is not protruding.To do so, push the BOTTOM EDGEdown straight into the unit – do notlift it! (Figure 7) . 4. Immediately place the front panelin its protective case for safe andclean storage (Figure 8) . EON EON EON CONTENTS MR1620W • MR1620S Us...

Page 6 - SPEAKER IMPEDANCE; Engl ish

3. Push the panel mechanism backinto the housing so it is not protruding.To do so, push the BOTTOM EDGEdown straight into the unit – do notlift it! (Figure 7) . 4. Immediately place the front panelin its protective case for safe andclean storage (Figure 8) . EON EON EON CONTENTS MR1620W • MR1620S Us...

Page 7 - The

3. Push the panel mechanism backinto the housing so it is not protruding.To do so, push the BOTTOM EDGEdown straight into the unit – do notlift it! (Figure 7) . 4. Immediately place the front panelin its protective case for safe andclean storage (Figure 8) . EON EON EON CONTENTS MR1620W • MR1620S Us...

Page 9 - SURFACE MOUNT

3. Push the panel mechanism backinto the housing so it is not protruding.To do so, push the BOTTOM EDGEdown straight into the unit – do notlift it! (Figure 7) . 4. Immediately place the front panelin its protective case for safe andclean storage (Figure 8) . EON EON EON CONTENTS MR1620W • MR1620S Us...

Page 11 - press these buttons

3. Push the panel mechanism backinto the housing so it is not protruding.To do so, push the BOTTOM EDGEdown straight into the unit – do notlift it! (Figure 7) . 4. Immediately place the front panelin its protective case for safe andclean storage (Figure 8) . EON EON EON CONTENTS MR1620W • MR1620S Us...

Page 12 - RDS Radio Settings

3. Push the panel mechanism backinto the housing so it is not protruding.To do so, push the BOTTOM EDGEdown straight into the unit – do notlift it! (Figure 7) . 4. Immediately place the front panelin its protective case for safe andclean storage (Figure 8) . EON EON EON CONTENTS MR1620W • MR1620S Us...

Page 13 - In CD Playback Mode

3. Push the panel mechanism backinto the housing so it is not protruding.To do so, push the BOTTOM EDGEdown straight into the unit – do notlift it! (Figure 7) . 4. Immediately place the front panelin its protective case for safe andclean storage (Figure 8) . EON EON EON CONTENTS MR1620W • MR1620S Us...

Page 14 - when you press this

3. Push the panel mechanism backinto the housing so it is not protruding.To do so, push the BOTTOM EDGEdown straight into the unit – do notlift it! (Figure 7) . 4. Immediately place the front panelin its protective case for safe andclean storage (Figure 8) . EON EON EON CONTENTS MR1620W • MR1620S Us...

Page 17 - Regional mode setting; Remove transport scr; Figur; Apply plastic film to seal scr

3. Push the panel mechanism backinto the housing so it is not protruding.To do so, push the BOTTOM EDGEdown straight into the unit – do notlift it! (Figure 7) . 4. Immediately place the front panelin its protective case for safe andclean storage (Figure 8) . EON EON EON CONTENTS MR1620W • MR1620S Us...

Page 18 - Figure 9

3. Push the panel mechanism backinto the housing so it is not protruding.To do so, push the BOTTOM EDGEdown straight into the unit – do notlift it! (Figure 7) . 4. Immediately place the front panelin its protective case for safe andclean storage (Figure 8) . EON EON EON CONTENTS MR1620W • MR1620S Us...

Page 19 - ANTENNA cannot contact GROUND; RED; BLUE; AUX AUDIO INPUTS; to Antenna

3. Push the panel mechanism backinto the housing so it is not protruding.To do so, push the BOTTOM EDGEdown straight into the unit – do notlift it! (Figure 7) . 4. Immediately place the front panelin its protective case for safe andclean storage (Figure 8) . EON EON EON CONTENTS MR1620W • MR1620S Us...

Page 20 - Disc is dirty or defective.

3. Push the panel mechanism backinto the housing so it is not pr otruding.T o do so, push the BOTTOM EDGEdown straight into the unit – do notlift it! (Figur e 7) . 4. Immediately place the fr ont panelin its pr otective case for safe andclean storage (Figur e 8) . EON EON EON CONTENTS MR1620W • MR16...

Page 21 - RDS Model with Switchable USA/European Frequencies; CD PLAYER; All specifications subject to change without notice.; A Max

3. Push the panel mechanism backinto the housing so it is not pr otruding.T o do so, push the BOTTOM EDGEdown straight into the unit – do notlift it! (Figur e 7) . 4. Immediately place the fr ont panelin its pr otective case for safe andclean storage (Figur e 8) . EON EON EON CONTENTS MR1620W • MR16...