Page 2 - Important Safety Instructions; Please read this owner’s guide carefully and save it for
2 - English Important Safety Instructions Please read this owner’s guide carefully and save it for future reference. WARNINGS: • To reduce the risk of fire or electrical shock, do not expose the product to rain or moisture. • Do not expose this apparatus to dripping or splashing, and do not place ob...
Page 3 - Contents; Introduction
English - 3 Contents Introduction Product Description ...................................................................................................................................................... 4Features and Benefits ...........................................................................
Page 4 - The Bose; Features and Benefits; with extended dynamic range and lower operating temperatures.; Carton Contents; F1 Model 812 Flexible Array Loudspeaker
4 - English Introduction Product Description The Bose ® F1 Model 812 Flexible Array Loudspeaker is the first powered portable loudspeaker that lets you control its vertical coverage pattern. Simply push or pull the array into position to create “Straight,” “C,” “J” or “Reverse J” coverage patterns. ...
Page 5 - attempt to install any loudspeaker overhead.; F1 Subwoofer
English - 5 Introduction F1 Model 812 Flexible Array Loudspeaker Note: The F1 Model 812 comes with threaded M8 inserts for rigging or attaching accessory brackets. CAUTION: Only professional installers with the knowledge of proper hardware and safe mounting techniques should attempt to install any l...
Page 6 - Adjusting the array; Pushing the array in; Four coverage patterns; Straight pattern; Pull top and bottom array out; J pattern; Pull top array out, push bottom array in.; C pattern; Push top and bottom array in.
6 - English Introduction Using the Flexible Array You can shape the coverage pattern by moving the position of the top and bottom array. The array position is held in place by magnets that trigger internal sensors that adjust EQ according to array shape. Adjusting the array Pushing the array in Pull...
Page 7 - Applications
English - 7 Introduction Applications Straight pattern Use the straight pattern when the audience is standing and their heads are approximately at the same height as the loudspeaker. Reverse-J pattern The reverse-J pattern is good for an audience in raked seating that starts at loudspeaker height an...
Page 8 - the F1 Subwoofer is easy:; Lift the F1 Model 812 Loudspeaker and place it on the stand.
8 - English Setting Up the System Using the F1 Model 812 with the F1 Subwoofer The built-in loudspeaker stand is stored in the rear of the subwoofer. Setting up the F1 Model 812 Loudspeaker with the F1 Subwoofer is easy: 1. Remove the built-in speaker stand from the back of the F1 Subwoofer and inse...
Page 9 - Setting Up the System; help keep them organized.; Using the F1 Model 812 on a Tripod Stand; stand. The pole cup fits a standard 35 mm post.
English - 9 Setting Up the System 3. Plug in your audio cables. Feed the cables from the F1 Model 812 through the channels in the speaker stand to help keep them organized. Cable channel (both sides) Using the F1 Model 812 on a Tripod Stand The bottom of the F1 Model 812 Loudspeaker includes pole cu...
Page 10 - Operation
10 - English Operation F1 Model 812 Control Panel Note: For a complete list of LED indications and behaviors, see “LED Indicators” on page 19. POWER/FAULT: • Blue = power on.• Red = fault condition. LIMIT: • Amber = system limiting (protection mode). FRONT LED: • POWER enables front LED to indicate ...
Page 12 - Connecting Sources; Setting Up INPUT 1 with a Microphone
12 - English Operation Power On/Off Sequence When turning the system on, turn on input sources and mixing consoles first and then turn on the F1 Model 812 Loudspeaker and the F1 Subwoofer. When turning the system off, turn off the F1 Model 812 and F1 Subwoofer first followed by input sources and mix...
Page 14 - RANGE and set the EQ selector switch on the F1 Subwoofer to THRU.
14 - English Operation Mixing console stereo output to F1 Subwoofer and left/right F1 Model 812 Loudspeakers Note: The recommend EQ settings are provided under the heading, “Setting EQ selector switches” on page 12. However, for maximum bass response, set the EQ selector switch on both F1 Model 812 ...
Page 16 - Mic to F1 Model 812 Loudspeaker INPUT 1; Mobile device to single F1 Model 812 Loudspeaker
16 - English Operation Mic to F1 Model 812 Loudspeaker INPUT 1 Set F1 Model 812 SIGNAL INPUT to MIC. Set F1 Model 812 EQ to FULL RANGE. Mobile device to single F1 Model 812 Loudspeaker Set F1 Model 812 EQ to FULL RANGE. Mobile device headphone output to F1 Model 812 INPUT 2 RCA connectors.
Page 17 - Mobile device to F1 Model 812 Loudspeaker and F1 Subwoofer
English - 17 Operation Mobile device to F1 Model 812 Loudspeaker and F1 Subwoofer Set F1 Model 812 EQ to FULL RANGE. F1 Model 812 F1 Subwoofer Mobile device headphone output to F1 Model 812 INPUT 2 RCA connectors. DJ Console to two F1 Subwoofers and two F1 Model 812 Loudspeakers Set LINE OUTPUT EQ t...
Page 18 - Cleaning; Troubleshooting
18 - English Care and Maintenance Caring for Your Product Cleaning • Clean the product enclosures using only a soft, dry cloth.• Do not use any solvents, chemicals, or cleaning solutions containing alcohol, ammonia, or abrasives.• Do not use any sprays near the product or allow liquids to spill into...
Page 19 - Your product is covered by a limited warranty. Visit; Accessories
English - 19 Care and Maintenance Problem What to do Excessive Noise or System Hum • When connecting a microphone to the F1 Model 812 Loudspeaker, make sure the INPUT 1, SIGNAL INPUT switch is set to MIC. • Check to make sure that all system connections are secure. Lines that are not completely conn...
Page 20 - Physical; Electrical; Input/Output Connector Wiring Reference; TRS balanced
20 - English Care and Maintenance Technical Information Physical Dimensions Weight F1 Model 812 Loudspeaker 26.1" H x 13.1" W x 14.6" D (665 mm H x 334 mm W x 373 mm D) 44.5 lb (20.18 Kg) F1 Subwoofer 27.0" H x 16.1" W x 17.6" D (688 mm H x 410 mm W x 449 mm D) 55.0 lb (24.95...
Page 23 - Additional Resources; See website for other countries
English - 23 Additional Resources Visit us on the web at pro.Bose.com . Americas (USA, Canada, Mexico, Central America, South America) Bose Corporation The Mountain Framingham, MA 01701 USA Corporate Center: 508-879-7330 Americas Professional Systems, Technical Support: 800-994-2673 Australia Bose P...
