BMW Z4 sDrive35is 2011- Manuals

▷ Federal Emissions Performance Warranty ▷ California Emission Control System LimitedWarranty Detailed information about these warranties islisted in the Service and Warranty InformationBooklet for US models or in the Warranty andService Guide Booklet for Canadian models.Your vehicle has been specif...

At a glance These overviews of buttons, switches and displays are intended to familiarize you with yourvehicle. You will also become quickly acquainted with the available control concepts and options. 11 Online Edition for Part no. 01 41 2 604 231 - 03 10 500

Cockpit All around the steering wheel 1 Opening and closing windowsjointly  38 2 Opening and closing rear win‐dows  38 3 Opening and closing front win‐dows  38 4 Exterior mirrors, folding in and out*  45 5 Adjust the exterior mirrors, Automatic CurbMonitor*  45 6 Parking lamps  75 Low beams  75 Auto...

Instrument cluster 1 Speedometer2 Indicator lamps for turn signals3 Indicator/warning lamps  15 4 Tachometer  62 5 Engine oil temperature  63 6 Display for ▷ Clock  62▷ External temperature  62▷ Indicator/warning lamps  15 7 Display for ▷ Automatic transmission posi‐ tion*  56 ▷ Gear display for 7-g...

Indicator/warning lamps Instrument cluster The indicator and warning lamps can light up ina variety of combinations and colors.Several of the lamps are checked for properfunctioning when the engine is started or the ig‐nition is switched on, and light up briefly. Text messages Text messages at the u...

All around the center console 1 Control Display  18 2 Hazard warning system  209 3 Central locking system  32 4 ▷ Air conditioner  96▷ Automatic climate control*  98 5 Hard drive for ▷ Audio CD/DVD  149▷ Navigation DVD*  120 6 Controls for ▷ Radio  142▷ CD/DVD  149 7 Seat heating*  43 Park Distance ...

All around the headliner 1 Emergency Request*  209 2 Reading lamp  79 3 Interior lamps  79 4 Reading lamp  79 5 Indicator lamp, front passengerairbag*  81 Seite 17 17 Online Edition for Part no. 01 41 2 604 231 - 03 10 500 Reference Mobility Communication Entertainment Navigation Driving tips Contro...

iDrive The concept The iDrive combines the functions of a multitudeof switches. Thus, these functions can be oper‐ated from a central location. Using the iDrive during a tripTo avoid becoming distracted and posing an unnecessary hazard to your vehicle's occu‐pants and to other road users, never atte...

3. Move in four directions. Buttons on controller Press the button Function MENU Opens the main menu. RADIO Opens the Radio menu. CD Opens the CD/Multimediamenu. NAV Opens the Navigationmenu. TEL Opens the Telephonemenu. BACK Displays the previouspanel. OPTION Opens the Options menu. Operating conce...

White arrows pointing to the left or right indicatethat additional panels can be opened. View of an opened menu When a menu is opened, it generally opens withthe panel that was last selected in that menu. Todisplay the first panel of a menu: ▷ Move the controller to the left repeatedlyuntil the firs...

4. Turn the controller until "Time/Date" is high‐lighted, and then press the controller. 5. Turn the controller until "Time:" is high‐lighted, and then press the controller. 6. Turn the controller to set the hours andpress the controller. 7. Turn the controller to set the minutes and...

Additional symbols Symbol Meaning Spoken instructions* are switchedoff. Request of the current vehicle posi‐tion*. Split screen General information Additional information can be displayed on theright side of the split screen, e.g., informationfrom the computer.In the divided screen view, the so-call...

▷ To display short information: touch the but‐ton. ▷ To display detailed information: touch thebutton for an extended period. Deleting the button assignments 1. Press buttons 1 and 6 simultaneously forapprox. five seconds. 2. "OK" Entering letters and numbers 1. Turn the controller: select l...

Voice activation system* The concept ▷ The voice activation system can be used tooperate equipment by means of spokencommands. ▷ The system encompasses special micro‐phones in the vicinity of the steering wheel. ▷ Most menu items on the Control Display canbe voiced as commands. The systemprompts you...

On the Control Display: 1. "Settings" 2. "Language/Units" 3. "Speech mode:" 4. Select the setting. Adjusting the volume Turn the volume button while giving an instruc‐tion until the desired volume is set. ▷ The volume remains constant even if thevolume of other audio sources ...

Opening and closing Remote control Buttons on the remote control 1 Unlocking2 Locking3 Opening the trunk lid General information The vehicle is supplied with two remote controlswith keys.Each remote control contains a rechargeablebattery that is automatically recharged when itis in the ignition lock...

Personal Profile settings The following functions and settings can bestored in a profile.More information on the settings can be foundunder: ▷ Assigning the programmable memory but‐ tons, refer to page 22 . ▷ Response of the central locking systemwhen the car is being unlocked, refer to page 30 . ▷ ...

Operating from the inside Via the button for the central locking system. If the vehicle is locked from the inside, the fuelfiller flap remains unlocked.If an accident of a certain severity occurs, thecentral locking system unlocks automatically.The hazard warning system and interior lampscome on. Op...

For US owners only The transmitter and receiver units comply withpart 15 of the FCC/Federal CommunicationCommission regulations. Operation is governedby the following:FCC ID:LX8766SLX8766ELX8CASCompliance statement:This device complies with part 15 of the FCCRules. Operation is subject to the follow...

1. "Settings" 2. "Door locks" 3. Select the desired function: ▷ "Lock if no door is opened"The vehiclelocks automatically after a short periodof time if a door is not opened. ▷ "Lock after start. to drive"The vehiclelocks automatically after you drive away. Unlocking ...

Closing Recessed grips in the interior trim of the trunklid make it easier to pull down the lid. Danger of pinchingMake sure that the closing path of the trunk lid is clear; otherwise, injuries may re‐sult.◀Press the trunk lid down lightly.It is closed automatically. Emergency unlocking* Pull the le...

Locking Press on the surface, arrow 2.This corresponds to pressing the but‐ ton. To save battery power, ensure that the ignitionand all electronic systems and/or power con‐sumers are switched off before locking the ve‐hicle. Window and convertible top operation With the ignition in the radio ready s...

Indicator lamp on the interior rearview mirror ▷ The indicator lamp flashes briefly every2 seconds:The system is armed. ▷ The indicator lamp flashes after locking:The doors, hood or trunk lid is not closedproperly, but the rest of the vehicle is se‐cured.The indicator lamp flashes continuously af‐te...

Opening, closing Individually ▷ Press the switch to the resistance point:The window opens while the switch is held.Closing can be performed in the same man‐ner by pulling the switch. ▷ Press the switch beyond the resistancepoint:The window opens automatically.Press the switch again to stop the openi...

Retractable hardtop General information Adhere to the following instructions: ▷ It is advisable that you close the retractablehardtop when you park the vehicle. Not onlydoes the closed hardtop protect the vehicleinterior against unanticipated weather dam‐age, it also offers theft protection. However...

Opening and closing In the radio ready state or beyond, refer topage 50, and when the vehicle is stationary: If possible, conserve the battery by only operat‐ing the retractable hardtop when the engine isrunning. Before closing the retractable hardtop,remove all foreign objects from the windshieldfr...

Adjusting Sitting safely The ideal seating position can make a vital con‐tribution to relaxed, fatigue-free driving.The seating position plays an important role inan accident in combination with: ▷ Safety belts, refer to page 44 . ▷ Head restraints. ▷ Airbags, refer to page 80 . Seats Note before ad...

Thigh support* Pull the lever and move the thigh support for‐ward or back. Adjusting electrically 1 Forward/backward2 Height3 Seat tilt 4 Backrest tilt Lumbar support* The curvature of the seat backrest can be ad‐justed in such a way that it supports the lumbarregion of the spine.The lower back and ...

Switching off Press the button longer.The LEDs go out. Safety belts General information Always make sure that safety belts are beingworn by all occupants before driving away.Although airbags enhance safety by providingadded protection, they are not a substitute forsafety belts. Seats with safety bel...

Seat and mirror memory* General information Two different driver's seat and exterior mirrorpositions can be stored and retrieved for eachremote control.Settings for the backrest width and lumbar sup‐port are not stored. Storing 1. Switch on the radio ready state or the igni‐ tion, refer to page 50 ....

Estimating distances correctlyObjects reflected in the mirror are closer than they appear. Do not estimate the distanceto the traffic behind you based on what you seein the mirror, as this will increase your risk of anaccident.◀The setting for the exterior mirrors is stored forthe remote control* cu...

Interior rearview mirror Reducing the blinding effect Blinding effect from behind when driving atnight: turn the knob. Interior rearview and exterior mirrors, automatic dimming feature* The automatic dimming feature of the interiorrearview and exterior mirrors* is controlled bytwo photo cells in the...

Transporting children safely The right place for children Note Children in the vehicleDo not leave children unattended in the vehicle; otherwise, they could endanger them‐selves and other persons, e.g., by opening thedoors.◀ Children on the front passenger seat Should it ever be necessary to use a c...

Child seat security The safety belt for the passenger can be lockedto prevent it from being pulled out when it is usedto secure child restraint systems. To lock the safety belt 1. Secure the child restraint fixing system withthe belt. 2. Pull out the belt webbing completely. 3. Allow the belt webbin...

Driving Ignition lock Insert the remote control into the ignition lock Insert the remote control all the way into the ig‐nition lock. ▷ Radio ready state is switched on. Individualelectrical consumers can operate. Comfort Access* If the car is equipped with Comfort Access, onlyinsert the remote cont...

Starting the engine Enclosed areasDo not let the engine run in enclosed areas; otherwise, breathing of exhaust fumesmay lead to loss of consciousness and death.The exhaust gases contain carbon monoxide, anodorless and colorless but highly toxic gas.◀ Unattended vehicleDo not leave the car unattended...

2. Shift into first gear or reverse. 3. Set the parking brake. 4. Remove the remote control from the ignition lock, refer to page 50 . Automatic transmission 1. With the car at a standstill, move the selectorlever to position P. 2. Press the Start/Stop button. 3. Set the parking brake. 4. Remove the...

With manual transmission Press the button of the parking brake. Depressthe brake and clutch pedals while doing so. With automatic transmission or 7-gear sport automatic transmission with dual clutch Press the parking brake button while the brakeis depressed or transmission position P is en‐gaged. In...

4. "Triple turn signal" The setting is stored for the remote control cur‐rently in use. Washer/wiper system 1 Switching on wipers2 Switching off wipers or brief wipe3 Activating/deactivating intermittent wipe or the rain sensor* 4 Cleaning the windshield and headlamps5 Setting speed for inte...

Cleaning the windshield and headlamps* Pull the lever, arrow 4.The system sprays washer fluid on the wind‐shield and activates the wipers briefly.When the vehicle lighting system is switched on,the headlamps are cleaned at regular and ap‐propriate intervals. Do not use the washer system at freezingt...

Automatic transmission with Steptronic* In addition to the fully automatic mode, you canalso shift gears manually using Steptronic, refer to page 57 . Disengaging the remote control To remove the remote control from the ignitionlock, first move the selector lever to position Pand switch off the engi...

7-gear sport automatic transmission with dual clutch* The concept This transmission is an automated manualtransmission with two clutches and two gearboxcomponents in which the gears are changedwithout loss of torque.The transmission is operated using the selectorlever and two shift paddles on the st...

N Neutral The vehicle can roll.N remains engaged after the engine is switchedoff if the remote control remains in the ignitionlock. This function can be used in an automaticcar wash, for example. P is automatically en‐gaged after approx. 30 minutes. D drive mode In drive mode, all forward gears are ...

shifts down without requiring your interven‐tion. Shifting down rapidly: even in manual mode, youcan skip several gears to achieve optimal accel‐eration. Do so by pressing the accelerator pastthe resistance point. Changing to drive mode Push the selector lever to the right. Shifting gears via the se...

rear wheels are blocked and the vehicle cannotbe towed.Release the transmission lock manually for tow‐ing only and set the parking brake beforehand toprevent the vehicle from rolling. After parkingthe vehicle, engage the transmission lock again manually, refer to page 61 . Manual release 1. Unclip t...

Displays Odometer, outside temperature display, clock 1 Knob in the instrument cluster2 Outside temperature display and clock3 Odometer and trip odometer Knob in the instrument cluster ▷ To reset the trip odometer while the ignitionis switched on. ▷ To display the time, external temperatureand odome...

Coolant temperature A warning lamp will come on if the coolant, andtherefore the engine, becomes too hot. In addi‐tion, a message will appear on the Control Dis‐play. Check the coolant level, refer to page 200 . Engine oil temperature* ▷ Cold engine: the pointer is at the low tem‐perature end. Drive...

Range Displays the estimated cruising range availablewith the remaining fuel. The range is calculatedbased on your driving style over the last18 miles/30 km and the current fuel supply. Refuel below 30 miles/50 kmRefuel below a range of 30 miles/50 km; otherwise, engine functions are not ensured and...

▷ The average fuel consumption. Resetting the fuel consumption and speed You can reset the values for average speed andaverage consumption: 1. Select the respective menu item and pressthe controller. 2. Press the controller again to confirm yourselection. Resetting the trip computer 1. "Vehicle ...

▷ Setting values 2 Button for: ▷ Confirming selected display or set val‐ues ▷ Calling up computer information  63 3 With the lights switched on: dimming the in‐ strument lighting  78 4 Calling up Check Control  71 5 Checking the engine oil level  198 6 Setting the time  66 7 Setting the date  67 8 V...

2. "Settings" Setting the time 1. "Settings" 2. "Time/Date" 3. "Time:" 4. Turn the controller until the desired hoursare displayed, and then press the controller. 5. Turn the controller until the desired minutesare displayed, and then press the controller. The time is...

2. "Time/Date" 3. "Format:" 4. Select the desired format. The date format is stored. Settings on the Control Display Language Setting the language To set the language on the Control Display: 1. "Settings" 2. "Language/Units" 3. "Language:" 4. Select the desire...

Service requirements Display The remaining driving distance and the date ofthe next maintenance are displayed briefly afterthe ignition is switched on.The current service requirements can be readout from the remote control by the service spe‐cialist.Data regarding the maintenance status or legallyma...

Required maintenance procedures and le‐gally mandated inspections are displayed. 4. Select an entry to call up detailed informa‐tion. Symbols Symbols Description No service is currently required. The deadline for service or a le‐gally mandated inspection isapproaching. Please make aservice appointme...

Indicator/warning lamps The indicator and warning lamps can light up ina variety of combinations and colors. indicates that Check Control messages have been stored. You can view the Check Controlmessages whenever it is convenient for you. Explanatory text messages Text messages at the upper edge of ...

It is accompanied by a text message on theControl Display. 3. Push button 1 to check for other messages. 4. Press button 2.The display again shows the outside tem‐perature and the time. Displaying stored Check Control messages 1. Press the button. 2. "Vehicle Info" 3. "Vehicle status"...

Lamps At a glance 0 Lamps off Daytime running lights 1 Parking lamps and low beams2 Low-beam headlamps and welcome lamps3 Automatic headlamp control*, daytime run‐ ning lights, welcome lamps, High-beam As‐sistant*, and adaptive light control* When you open the driver's door with the igni‐tion switch...

3. "Pathway light.: s" 4. Set the duration. The setting is stored for the remote control cur‐rently in use. Automatic headlamp control Switch position : the low beams are switchedon and off automatically depending on the am‐bient light, e.g., in tunnels, in twilight or if thereis precipitati...

High beams/roadside parking lamps 1 High beams2 Headlamp flasher3 Roadside parking lamps* Left and right roadside parking lamps* There is an additional option of switching on thelamps on the side of the car facing the road whenparked. Switching on After parking the vehicle, press the lever up ordown...

▷ In detecting poorly-lit road users, such aspedestrians, cyclists, horseback riders andwagons; when driving close to train or shiptraffic; and at animal crossings. ▷ In tight curves, on hilltops or in depressions,in cross traffic or half-obscured oncomingtraffic on freeways. ▷ In poorly-lit towns a...

Safety Airbags The following airbags are located under themarked covers: 1 Front airbags2 Side airbags in the seat backrests3 Knee airbag Front airbags Front airbags help protect the driver and pas‐senger by responding to frontal impacts inwhich safety belts alone cannot provide ade‐quate restraint....

Do not touch the individual components imme‐diately after the system has been triggered; oth‐erwise, there is the danger of burns.Only have the airbags checked, repaired or dis‐mantled and the airbag generator scrapped byyour service center or a workshop that has thenecessary authorization for handl...

Operational readiness of airbag system In the radio ready state and beyond, refer topage 50 , the warning lamp comes on briefly to indicate that the entire airbag system and thebelt tensioners are operational. Airbag system malfunction ▷ Warning lamp does not light up in the radioready state. ▷ Warn...

Indication of a flat tire The warning lamps come on in yellowand red. A message appears on theControl Display. In addition, a signalsounds. There is a flat tire or a major loss in tire inflationpressure. 1. Carefully reduce your speed to a maximumof 50 mph/80 km/h.Avoid sudden braking and steering m...

Driving stability control systems Antilock Brake System ABS ABS prevents locking of the wheels during brak‐ing.The vehicle remains steerable even during fullbrake applications, thus increasing activesafety.ABS is operational every time you start the en‐gine. Electronic brake-force distribution The s...

Deactivating/activating Dynamic Traction Control DTC The system and program can be deactivated/activated via Dynamic Driving Control, refer to page 88 . Dynamic Driving Control The concept Dynamic Driving Control can be used to adjustthe driving dynamics of the vehicle. Several pro‐grams are availab...

TRACTION is displayed in the instrument clus‐ter.The DSC indicator lamp in the instrument clus‐ter lights up. Deactivating TRACTION Press the button again.TRACTION and the DSC indicator lamp go out. Indicator/warning lamps When DTC is activated, TRACTION is displayedin the instrument cluster. The in...

Driving comfort Cruise control* The concept Cruise control is available for use at speeds ofapprox. 20 mph/30 km/h and higher. The carthen stores and maintains the speed that youspecify using the lever on the steering column.In order to maintain the specified speed, thesystem brakes the vehicle when...

Accelerating using the lever Accelerating slightly:Press the lever to the resistance point, arrow 1,and hold until the desired speed is reached.Accelerating significantly:Press the lever beyond the resistance point, ar‐row 1, and hold until the desired speed isreached.The vehicle accelerates without...

A message appears on the Control Display. More information, refer to page 71 . Park Distance Control PDC* The concept PDC supports you when parking.Objects that you are approaching slowly in frontof* or behind your vehicle are indicated with: ▷ Signal tones. ▷ Visual display. Measurement Measurement...

Signal tones When approaching an object, an intermittenttone is sounded that indicates the position of theobject. For example, if an object is detected tothe left rear of the vehicle, a signal tone soundsfrom the left rear speaker.The shorter the distance to the object becomes,the shorter the interv...

Climate control Overview 1 Equipment variant: air conditioner  96 2 Equipment variant: automatic climate con‐trol*  98 3 Air vent: the airflow is directed toward the windshield and side windows 4 Air vent: air for the upper body area. The thumbwheels increase and decrease the airsupply continuously;...

Air conditioner 1 Vent settings2 Recirculated air mode3 Cooling function 4 Temperature5 Air volume6 Rear window defroster Vent settings Direct the flow of air to the win‐dows , to the upper body area or to the knee area and foot‐ well . Intermediate settings arepossible. In the 6 o'clock position, a...

Rear window defroster The defroster switches off auto‐matically after a certain time or when the hardtop is opened. Temperature To increase the temperature, turnthe rotary switch clockwise to‐wards red. For a lower temperature,turn the rotary switch counter‐clockwise towards blue. Defrosting windows...

Automatic climate control* 1 Temperature, left side of passenger com‐ partment 2 Maximum cooling3 Rear window defroster4 Defrosting windows and removing conden‐ sation 5 Automatic recirculated air control/recircu‐ lated air mode 6 Manual air distribution7 AUTO program8 Air flow rate, manual, climate...

Interior equipment Integrated universal remote control* The concept This system can replace up to three differenthand-held transmitters for various types of re‐mote-controlled equipment, such as garagedoors or lighting systems.The hand-held transmitter signal can be pro‐grammed on one of the three m...

To do so: ▷ Read the instructions of the hand-heldtransmitter. ▷ Press the memory button of the universalremote control for an extended period. If the LED flashes rapidly for a brief period andthen lights up continuously for approx. 2 sec‐onds, the hand-held transmitter is equippedwith an alternatin...

▷ The cardinal direction displayed does notchange even if the direction of travelchanges. ▷ Not all compass directions are shown. Procedure 1. Make sure that there are no large metal ob‐jects or overhead power lines in the vicinityof your vehicle and that you have enoughspace to drive in a circle. 2...

To do so, press the cargo area partition 1 up‐ward.Before opening the hardtop, pull the cargo areapartition 1 down until it engages in both guides2. Observe before opening and closing thehardtop ▷ Before moving the hardtop, ensure thatthere are no objects on or next to the cargoarea partition; other...

present a source of danger to the passengers,for example during braking or evasive maneu‐vers.◀ After loading, secure the transport bag and itscontents. Tighten the retaining strap on the ten‐sioning buckle for this purpose.To store the transport bag, perform the stepsdescribed for loading in revers...

Storage compartments Glove compartment Opening Pull the handle, arrow 2.The light in the glove compartment switches on. Close the glove compartment again im‐mediately Close the glove compartment immediately afteruse while driving; otherwise, injury may occurduring accidents.◀ Closing Fold up the cov...

Connection for an external audio device You can connect an external audio device suchas a CD or MP3 player and play audio tracks overthe car's loudspeaker system: ▷ AUX-IN port, refer to page 160 . ▷ USB audio interface*, refer to page 161 . Storage compartments inside the vehicle The following comp...

Driving tips This section provides you with information useful in dealing with specific driving and operating conditions. 111 Online Edition for Part no. 01 41 2 604 231 - 03 10 500

Things to remember when driving Breaking-in period General information Moving parts need to be broken in to adjust toeach other.The following instructions will help achieve along vehicle life and good economy. Engine and differential Always obey the official speed limits. Up to approx. 1,200 miles/2...

Do not touch hot exhaust pipes; otherwise, thereis the danger of getting burned.◀ Mobile communication devices in the vehicle Mobile communication devices in the ve‐hicle It is not recommended to use mobile phones,such as mobile phones without a direct connec‐tion to an external aerial in the vehicl...

Never allow floor mats, carpets or any other ob‐jects to protrude into the area of pedal move‐ment and impair pedal operation.◀ Brake disc corrosion Corrosion on the brake discs and contaminationon the brake pads are furthered by: ▷ Low mileage. ▷ Extended periods when the vehicle is notused at all....

Load The maximum load is the sum of the weight ofthe occupants and the cargo.The greater the weight of the occupants, theless cargo that can be transported. Stowing cargo Trunk ▷ Heavy cargo: stow as far forward and as lowas possible, ideally directly behind the trunkseparating wall. ▷ Cover sharp e...

Saving fuel General information Fuel consumption depends on a number of dif‐ferent factors.The implementation of certain measures, driv‐ing style and regular maintenance, refer to page 202, can have an influence on fuel con‐ sumption and on the environmental impact. Remove unnecessary cargo Addition...

Navigation This chapter contains various examples of how the navigation system can guide you reliably to your destination. 119 Online Edition for Part no. 01 41 2 604 231 - 03 10 500

Navigation system* General information The navigation system can determine the pre‐cise position of the vehicle, with the aid of sat‐ellites and vehicle sensors, and can reliablyguide you to every entered destination. Entries in stationary vehicleEnter data only when the vehicle is sta‐ tionary, and...

Destination entry At a glance In entering your destination you can select fromthe following options: ▷ Enter the destination manually, see below. ▷ Select the destination from the address book, refer to page 123 . ▷ Last destinations, refer to page 124 . ▷ Special destinations, refer to page 124 . ▷...

Starting destination guidance after entering the destination 1. "Accept destination" 2. "Start guidance" or "Add as another dest." ▷ Adjust, refer to page 130, the "Route preference". ▷ Adjust, refer to page 124, the "Points of Interest at loc.". Address book ...

4. Open "Options". 5. "Edit in Contacts" or "Delete entry" Using the home address as the destination The home address must be stored. Specify the home address, refer to page 176 . 1. "Navigation" 2. "Address book" 3. "Home" 4. "Start guidance" ...

▷ "At a different destination" ▷ "Along route" Special destinations category 1. "Category" 2. Select "All" or the specific category of thespecial destination, e.g., hotels or restau‐rants. Category details For some special destinations, additional detailscan be displa...

4. "Display Points of Interest" 5. Select the setting. Destination entry by map If you only know the location of the town orstreet, you can enter the destination using themap. Opening the map 1. "Navigation" 2. "Map" The map section is displayed. The map showsthe current posi...

Saying the entries ▷ Countries, towns and cities, streets, and in‐tersections can be said as whole words orspelled in the system language, refer to page 68 . Example: to enter a destination in a US stateas a whole word, the system language mustbe English. ▷ The town/city, street, and house numbercan...

Planning a trip New trip Multiple intermediate destinations can be en‐tered for a trip. 1. "Navigation" 2. "Map" 3. Move the controller to the left if necessary. 4. "Guidance" 5. "Enter new destination" 6. Select the type of destination entry. 7. Enter the intermediat...

4. Select an intermediate destination. 5. "Reposition dest. in the trip" Deleting an intermediate destination 1. "Map" 2. "Guidance" 3. "Display all trip destinations" 4. Select an intermediate destination. 5. "Delete dest. in the trip" Deleting a trip 1. "...

Destination guidance Starting destination guidance 1. "Navigation" 2. "Enter address" 3. Select the destination. 4. "Accept destination" 5. "Start guidance" The route is displayed on the Control Displayafter it is calculated.The distance to the destination/intermediat...

▷ "Avoid ferries": ferries are avoidedwhere possible. The setting applies to the current route and tothe planning of future routes. Dynamic destination guidance The route is automatically changed in the eventof traffic obstructions. ▷ The system does not point out traffic ob‐structions along...

6. Select the symbol. 7. "Start guidance" or "Add as another dest." Destination guidance through voice instructions Switching spoken instructions on/off Voice instructions can be switched on or off dur‐ing destination guidance. 1. "Navigation" 2. "Map" 3. Move the con...

3. Move the controller to the left if necessary. 4. "Traffic Info" 5. Select the desired traffic bulletins.First the traffic bulletins on the plannedroute are displayed. The traffic bulletins aresorted by their distance from the current po‐sition of the vehicle. Additional information can be...

Entertainment This chapter helps assure your enjoyment when receiving radio stations and playing CDs, DVDs and tracks from the music collection. 139 Online Edition for Part no. 01 41 2 604 231 - 03 10 500

Tone Tone General information The sound settings are stored for the remotecontrol currently in use. Treble, bass, balance, and fader ▷ "Balance": left/right volume distribution. ▷ "Fader": front/rear volume distribution. Setting treble, bass, balance, and fader 1. "CD/Multimedia&...

Volume ▷ "Speed volume": speed-dependent volumecontrol. ▷ "PDC": volume of the PDC signal* com‐pared to the entertainment sound output. ▷ "Gong": volume of the signal, such as thesafety belt reminder, compared to the en‐tertainment sound output. Adjusting the volume 1. "C...

Radio Controls 1 Volume, on/off2 Change wave band3 Change entertainment sources4 Change station/track5 Programmable memory buttons AM/FM station Selecting a station 1. "Radio" 2. "FM" or "AM" 3. Select the desired station. All saved stations are stored for the remote con‐trol...

Navigation bar overview Symbol Function Change the list view. Select the category. Direct channel entry Timeshift Open the My Favorites category/open a favorite. Manage the favorites. Traffic Jump The functions of the navigation bar symbols canalso be stored on the programmable memory buttons, refer...

3. Select "All channels" or the desired cate‐gory. 4. Select the desired channel. Via the button on the radio Press the button.The next channel is selected. Via direct channel entry 1. "Radio" 2. "Satellite radio" 3. "Select channel" 4. Turn the controller until the d...

Opening the favorites When an activated favorite is playing, the fol‐lowing message appears for approx. 20 sec‐onds: "Favorite alert!". "Favorites" Select the symbol while the message is shown. The displayed favorite is played.If there is no message, the system changes tothe My Favor...

Stored stations General information It is possible to store up to 40 stations. Calling up a station 1. "Radio" 2. "Presets" 3. Select the desired station. Storing a station The station currently selected is stored. 1. "Radio" 2. "Presets" 3. "Store station" 4....

CD/multimedia Controls 1 Volume, on/off2 Eject CD/DVD3 CD/DVD drive4 Change the entertainment source5 Change station/track6 Programmable memory buttons CD/DVD CD/DVD playback Loading the CD/DVD player Insert the CD/DVD with the printed side up.Playback begins automatically.Reading can take a few min...

Selecting the track using the iDrive Audio CDs Select the desired track to begin playback. CDs/DVDs with compressed audio files Depending on the data, some letters and num‐bers of the CD/DVD may not be displayed cor‐rectly. 1. Select the directory if necessary.To change to a higher level directory: ...

Automatic repeat* The selected track, directories, or CDs/DVDsare repeated automatically. Video playback* Country codes Only DVDs with the code of the home region canbe played back; also refer to the information onthe DVD. Code Region 1 USA, Canada 2 Japan, Europe, Middle East, South Af‐rica 3 South...

Selecting a track DVD video: 1. Turn the controller when the DVD menu isdisplayed. 2. Open "Options". 3. "Additional options" 4. "Select title" 5. Select the desired track. VCD/SVCD: 1. "Select track" 2. Select the desired track. Selecting the camera angle* The availa...

Filling all vacant CD/DVD compartments 1. Press the button for a longer period. The LEDs on the empty CD compartmentsflash. 2. Wait for the LEDs on the DVD slot to beginflashing and then insert each CD or DVD intothe center of the slot.The CDs/DVDs are drawn in automaticallyand placed into the vacan...

Notes CD/DVD player and changer Do not remove the coverBMW CD/DVD players and changers are officially designated Class 1 laser products. Donot operate if the cover is damaged; otherwise,severe eye damage can result.◀ CDs and DVDs Use of CDs/DVDs ▷ Do not use self-recorded CDs/DVDswith labels applied...

Music collection* Storing music General information Music tracks from CDs/DVDs and USB devicescan be stored in the music collection on a harddisc in the vehicle and played from there. ▷ Audio CD: tracks are converted into a com‐pressed audio format. If available, informa‐tion on the album, such as t...

Continuing the storage process 1. "CD/Multimedia" 2. "CD/DVD" 3. Select the symbol for the CD/DVD player. 4. "Continue storing" Storage of the CD/DVD continues at the begin‐ning of the track at which storage was inter‐rupted. Album information During storage, information such...

▷ Select the desired entry from the list. 6. Select other categories if you wish.The tracks found are listed in alphabeticalorder.Not all categories need to be selected. Forexample, to search for all tracks by a certainartist, call up that artist only. All of the tracksby that artist are then displa...

4. Change directories if needed to selecttracks.To go up a level in the directory: move thecontroller to the left. Random playback All tracks of the selection are played back in ran‐dom order. 1. "CD/Multimedia" 2. "Music collection" 3. Open "Options". 4. "Random" Man...

Music collection Backing up the music collection The entire music collection can be stored on aUSB device. Make sure there is enough freememory capacity on the USB device.Depending on the number of tracks, backing upthe music collection may take several hours.Therefore, it is best to perform the bac...

Connect the headphone connector or line-outconnector of the device to the AUX-IN port. Playback 1. Connect the audio device, switch it on andselect a track on the audio device. 2. "CD/Multimedia" 3. If necessary, "External devices". 4. "AUX front" Volume The volume of the sou...

Connect the Apple iPod/iPhone to the AUX-INport 1 and USB interface 2 using the cableadapter for the Apple iPod/iPhone.The Apple iPod/iPhone menu structure is sup‐ported by the USB audio interface. Connection of a USB device via the USBaudio interface Connect using a flexible adapter cable to protec...

Playback lists Calling up playback lists. 1. "CD/Multimedia" 2. "External devices" 3. Select the symbol. 4. "Playlists" Current playback List of tracks currently being played. 1. "CD/Multimedia" 2. "External devices" 3. Select the symbol. 4. "Current playb...

Communication All of the options available to you for mobile communication with family, friends, business partners, and service providers are described in this chapter. 165 Online Edition for Part no. 01 41 2 604 231 - 03 10 500

Telephone* At a glance The concept After the mobile phone is paired once with thevehicle, the mobile phone can be operated usingthe iDrive, the steering wheel buttons and voiceactivation*.A paired mobile phone is automatically detectedas soon as it is located inside the vehicle, whenthe ignition is ...

3. "Add new phone"The Bluetooth name of the vehicle is dis‐played. 4. To perform additional steps on the mobilephone, refer to the mobile phone operatinginstructions: for instance, search for or con‐nect the Bluetooth device or a new device.The Bluetooth name of the vehicle appearson the mob...

3. Select the mobile phone that is to be con‐nected. Unpairing the mobile phone 1. "Telephone" 2. "Bluetooth (telephone)"All paired mobile phones are listed. 3. Highlight the mobile phone that is to be un‐paired. 4. Open "Options". 5. "Remove phone from list" What to ...

Controls Adjusting the volume Turn the knob until the desired volume is se‐lected. The ringer volume of incoming calls and the callvolume can be adjusted independently.The setting is stored for the remote control cur‐rently in use. Incoming call Receiving calls If the number of the caller is stored ...

The phone number can also be entered byvoice*. Calls with multiple parties General information You can switch between calls and connect twocalls to a single conference call. These functionsmust be supported by the mobile phone andservice provider. Accepting a call while speaking to another party Thi...

3. "Store as new contact" or "Add to existingcontact" 4. Select the type of number: "Home","Business", "Mobile" or "Other" 5. Complete the entries if necessary. 6. "Store contact" Messages Display of different messages: ▷ Messages from My Info ...

Inserting/removing the snap-in adapter 1. Press button 1 and remove the cover. 2. Insert the snap-in adapter at the front, ar‐row 1, and press down, arrow 2, until it en‐gages. To remove the snap-in adapter: press button 1. Inserting the mobile phone 1. Depending on the mobile phone, removethe prote...

Contacts* General information Contacts can be created and edited. The con‐tacts from the mobile phone* are displayed aswell if this function is supported by the mobilephone. The addresses can be adopted as des‐tinations for navigation and the phone numberscan be dialed directly. New contact 1. "...

Deleting contacts Only contacts that are stored in the vehicle aredeleted. The contacts on the mobile phone can‐not be deleted. 1. "My contacts" 2. Highlight the contact. 3. Open "Options". 4. "Delete contact" or "Delete all contacts" Seite 178 178 Online Edition for ...

BMW Assist* BMW Assist General information BMW Assist provides you with various services,e.g., transmission of the position data of yourvehicle to the BMW Assist Response Center ifan Emergency Request* has been initiated.Many BMW Assist services depend on the indi‐vidually agreed upon contract.After...

▷ Data on the vehicle's service requirementscan be sent directly to the service center. Inthis way, the service center can plan its workin advance. This shortens the duration of theservice appointment. ▷ In the event of a breakdown, data on the ve‐hicle's condition can be sent directly toRoadside As...

TeleService Diagnosis* TeleService Diagnosis enables the wirelesstransmission of detailed vehicle data that areimportant for vehicle diagnosis. These data aretransmitted automatically.After the data are transmitted, the voice con‐nection to Roadside Assistance is re-estab‐lished. TeleService Help* T...

Opening the start page 1. Open "Options". 2. "Display start page" Loading a new page 1. Open "Options". 2. "Reload" Cancel 1. Open "Options". 2. "Cancel loading" Customer Relations At a glance Contact Customer Relations for information onall aspects of...

the service partner will contact you and a serviceappointment can be arranged.To check when your service partner was noti‐fied: 1. "Vehicle Info" 2. "Vehicle status" 3. Open "Options". 4. "Last Service Request" Data transfer* The status of the data transfer is display...

Mobility In order to always ensure your mobility, you will find important information on operating fluids, wheels and tires, maintenance and Roadside Assistance in the following. 185 Online Edition for Part no. 01 41 2 604 231 - 03 10 500

Refueling Notes Switch off the engine before refuelingAlways switch off the engine before refu‐ eling; otherwise, fuel cannot be added to thetank and a message will be displayed.◀ Observe when handling fuel ▷ Take all precautionary measures andobserve all applicable regulationswhen handling fuel. ▷ ...

Fuel Fuel quality For the best fuel economy, the gasoline shouldbe sulfur-free or very low in sulfur content. Refuel with unleaded fuel onlyDo not use leaded fuel as this would per‐ manently damage the catalytic converter.◀Fuels with a maximum ethanol content of 10 %,i.e., E10, may be used for refue...

Wheels and tires Tire inflation pressure Information for your safety It is not merely the tires' service life, but alsodriving comfort and, to a great extent, drivingsafety that depend on the condition of the tiresand the maintenance of the specified tire pres‐sure. Check the tire inflation pressure...

Tire inflation pressures Z4 sDrive30i Tire size Pressure specifications in psi/kPa Traveling speeds of up to100 mph/160 km/h Traveling speeds including thoseexceeding 100 mph/160 km/h All pressure specificationsin the table are indicated inpsi/kilopascal with coldtires.Cold = ambient tempera‐ture wi...

Tire inflation pressures Z4 sDrive35i Tire size Pressure specifications in psi/kPa Traveling speeds of up to 100 mph/160 km/h Traveling speeds including thoseexceeding 100 mph/160 km/h All pressure specifica‐tions in the table areindicated in psi/kilo‐pascal with cold tires.Cold = ambient tem‐peratu...

Tire size Pressure specifications in psi/kPa Front: 225/40 R 18 88W 36/250 - 38/260 - Rear: 255/35 R 18 90W - 42/290 - 45/310 Front: 225/35 R 19 88Y XL 36/250 - 36/250 - Rear: 255/30 R 19 91Y XL - 42/290 - 44/300 More details on the permissible load and weights, refer to page 224 . Tire inflation pr...

R: radial tire code17: rim diameter in inches91: load rating, not for ZR tiresV: speed rating, before the R on ZR tires Speed letter Q = up to 100 mph/160 km/hT = up to 118 mph/190 km/hH = up to 131 mph/210 km/hV = up to 150 mph/240 km/hW = up to 167 mph/270 km/hY = up to 186 mph/300 km/h Tire Ident...

Temperature grade for this tireThe temperature grade for this tire is es‐ tablished for a tire that is properly inflated andnot overloaded. Excessive speed, underinfla‐tion, or excessive loading, either separately or incombination, can cause heat buildup and pos‐sible tire failure.◀ RSC – Run-flat t...

Run-flat tires Label RSC label on the tire sidewall.The wheels are composed of special rims andtires that are self-supporting, to a limited de‐gree.The support of the sidewall allows the tire to re‐main drivable to a restricted degree in the eventof a pressure loss. Driving with a damaged tire: ▷ Fl...

Engine compartment Important features in the engine compartment 1 Coolant expansion tank  200 2 Jump-starting connection, negative termi‐nal  211 3 Vehicle identification number*4 Filler neck for washer fluid for the headlampand window washer system  55 5 Engine oil filler neck  200 6 Jump-starting ...

1. Pull the lever. 2. Push the release lever to the right and openthe hood. Danger of injury when the hood is open There is a danger of injury from protruding partswhen the hood is open.◀ Closing the hood Close the hood from a height of approx. 16 in/40 cm with momentum. It must be clearly heardto e...

Possible displays Too much engine oilHave the vehicle checked immediately; otherwise, surplus oil can lead to engine dam‐age.◀ 1 Oil level OK2 Oil level is being checked. This can take about 3 minutes if the car is at a standstill ona level surface, or about 5 minutes while thecar is on the move. 3 ...

culated remaining mileage until the next oil service, refer to page 69 . Have the system checked as soon as possible. Adding engine oil Add a maximum quantity of 1 US quart/1 liter ofoil only after a corresponding message appearson the Control Display. Add oil promptlyAdd oil within the next 125 mil...

filler neck, refer also to the diagram next tothe filler neck. 4. If the coolant is low, slowly add coolant up tothe specified level; do not overfill. 5. Turn the cap until there is an audible click. 6. Have the cause of the coolant loss elimi‐nated as soon as possible. Disposal Comply with the appr...

Maintenance BMW Maintenance System The system obtains information about the roadsafety and operational reliability of the vehicleand takes into account aspects such as a timelyvehicle check. The aim is to optimize mainte‐nance procedures with a view to reducing thecost of running the vehicle. Condit...

Socket for OBD Onboard Diagnosis An OBD socket for testing components that arecritical to exhaust composition is located undera cover on the driver's side. Emissions values ▷ The warning lamp lights up:The emissions values are deterio‐rating. Have the vehicle checked assoon as possible. ▷ The warnin...

Replacing components Tool kit The onboard vehicle tool kit is stored in a pouchunder the trunk floor panel. Replacing the wiper blades 1. Fold up the wiper arm. 2. Fold the wiper blade upwards. 3. Press the hook. 4. Pull the wiper blade downward out of theholder and remove it toward the top left, se...

3. Turn the bulb holder to the left and removeit. 4. Turn the bulb to the right, see arrow, and re‐move it. 5. Change the bulb and screw it into the bulbholder toward the left. 6. Insert the bulb holder and turn it to the right. 7. Reattach the cover. Tail lamps ▷ Brake lamp, backup lamp: W16W bulb,...

Changing the outer brake lamp 1. Remove the cover in the trunk. 2. Pull out the bulb holder, see arrow, andchange the bulb. 3. Attach the bulb holder. 4. Reattach the cover. License plate lamp, tail lamp, center brake lamp and turn signal These lamps are made using LED technology.Please contact your...

Battery replacement Use approved vehicle batteries.Only use vehicle batteries that have been approved for your vehicle by the manufacturer;otherwise, the vehicle could be damaged andsystems or functions may not be fully availa‐ble.◀After a battery replacement, have the batteryregistered on the vehic...

Giving and receiving assistance Hazard warning system The button for the hazard warning system is lo‐cated on the center console. Emergency Request* Requirements ▷ BMW Assist is activated. Activate BMW As‐ sist, refer to page 181 . ▷ Radio ready state is activated. ▷ The BMW Assist system is logged ...

tification is not affected by the button beingpressed. Emergency Request not guaranteedFor technical reasons, the Emergency Re‐ quest cannot be guaranteed under unfavorableconditions.◀ Warning triangle* The warning triangle is located in a holder in thetrunk lid. Press the tabs to take it out. First...

otherwise, there is the danger of short cir‐cuits.◀ Starting aid terminals Connecting orderConnect the jumper cables in the correct order; otherwise, there is the danger of injuryfrom sparking.◀ The so-called starting aid terminal in the enginecompartment acts as the battery's positive ter‐minal. Th...

Screw thread Front Release the cover panel in the bumper:Press on the recess at the bottom left in thecover panel. Rear Release the cover panel in the bumper:Press on the recess at the bottom center in thecover panel. Towing General information Light towing vehicleThe towing vehicle must not be ligh...

Observe all notes on towing or vehicle damageor accidents can occur.◀ ▷ Make sure that the ignition is switched on;otherwise, the low beams, tail lamps, turnsignals, and windshield wipers may be un‐available. ▷ When the engine is stopped, there is nopower assist. Consequently, more forceneeds to be ...

Care Car washes Notes Steam jets or high-pressure washersWhen using steam jets or high-pressure washers, hold them a sufficient distance awayand use a maximum temperature of 140 ℉/60 ℃.Holding them too close or using excessivelyhigh pressures or temperatures can cause dam‐age or preliminary damage t...

Transmission position P is engaged automati‐cally: ▷ Automatically after approx. 30 minutes. ▷ When the remote control is removed fromthe ignition lock. Headlamps ▷ Do not rub dry and do not use abrasive orcaustic cleansers. ▷ Soak areas that have been soiled e.g. due toinsects, with shampoo and was...

above 140 ℉/60 ℃; follow the manufacturer'sinstructions. Chrome surfaces* Carefully clean components such as the radiatorgrille or door handles with an ample supply ofwater, possibly with shampoo added, particu‐larly when they have been exposed to road salt. Rubber components Aside from water, treat...

Long-term vehicle storage Your service center can advise you on what toconsider when storing the vehicle for longerthan three months. Seite 218 218 Online Edition for Part no. 01 41 2 604 231 - 03 10 500 Care

Reference This chapter contains technical data, short commands for the voice activation system, and an index that will quickly take you to the information you need. 221 Online Edition for Part no. 01 41 2 604 231 - 03 10 500

Technical data Engine specifications Z4 sDrive30i Displacement cu in/cm³ 182.8/2,996 No. of cylinders 6 Maximum output hp 255 at engine speed rpm 6,600 Maximum torque lb ft/Nm 220/298 at engine speed rpm 2,600 Z4 sDrive35i Displacement cu in/cm³ 181.8/2,979 No. of cylinders 6 Maximum output hp 300 a...

Dimensions Z4 sDrive30i, Z4 sDrive35i All dimensions given in inches/mm. Seite 223 223 Online Edition for Part no. 01 41 2 604 231 - 03 10 500 Reference Mobility Communication Entertainment Navigation Driving tips Controls At a glance

Z4 sDrive35is All dimensions given in inches/mm. Smallest turning circle Ø: 35.1 ft/10.7 m Weights Z4 sDrive30i Approved gross vehicle weight Manual transmission lbs/kg 3,924/1,780 With automatic transmission lbs/kg 3,990/1,810 Load lbs/kg 562/255 Approved front axle load lbs/kg 1,808/820 Seite 224 ...

Z4 sDrive30i Approved rear axle load lbs/kg 2,227/1,010 Trunk capacity cu ft/l 6.4 ‐ 10.9/180 ‐ 310 Z4 sDrive35i Approved gross vehicle weight Manual transmission lbs/kg 4,134/1,875 With automatic transmission lbs/kg 4,178/1,895 Load lbs/kg 562/255 Approved front axle load lbs/kg 1,918/870 Approved ...

Short commands for voice activation system General information Instructions for voice activation system, refer to page 24 . To have the available spoken instructions readaloud ›Voice commands‹ Useful short commands Function Command Opening the music collection ›Music collection‹ Opening the tone set...

Music collection Function Command Calling up the current playback ›Current playback‹ Opening the music collection ›Music collection‹ Playing the music collection ›Music collection on‹ Searching for music; opening the menu ›Music search‹ Playing back the most frequently played tracks ›Top fifty‹ Exte...

Function Command Scale...kilometers ›Map scale ... kilometers‹ e.g., mapscale 5 kilometers Scale...miles ›Map scale ... miles‹ e.g., map scale5 miles Split screen settings Function Command Split screen ›Switch on splitscreen‹ Switching off the split screen ›Turn off split screen‹ Adapting the split ...

Destination guidance with intermediate destinations Function Command New destination entry ›Enter address‹ Trip list ›Stored trips‹ Contacts Function Command My contacts ›My contacts‹ Opening the contacts ›Contacts‹ New contact ›New contact‹ BMW Assist Function Command Opening BMW Assist* ›B M W Ass...

Closing– From the inside 32 – From the outside 30 Cockpit 12 Cold start, refer to Starting the engine 51 Combination instrument, refer to Instrument cluster 14 Combination switch– Refer to Washer/wiper sys‐ tem 54 Comfort Access– Battery replacement 36 – In a car wash 35 Comfort area, refer to Aroun...