Blue Sea Systems PN 8408 - Manuals

DC Installation (continued) 3. Install battery bank voltage monitor wires The panel is supplied with a digital meter and switch to monitor the voltage of three separate sources, usually the batteries. Connect a minimum 16 AWG red wire from each source to be monitored to each of the corresponding inp...

1. Apply branch circuit labels and mount panel Apply a label for each circuit from the label set provided. If the appropriate label is not included, extended label sets are available through retail suppliers, and over 500 individual labels are available directly from Blue Sea Systems. Please go to w...

ADDITIONAL BREAKER REQUIRED IF GREA TER THAN 10 FEET 0.5 TO 2 AMP FUSES 1 TO 2 AMP FUSE W iring Diagram AC/DC Power Distribution Panel with AC & DC Digital Multimeters PN 8408 / PN 3408 shown for reference 9089 Rev. 006 Page 4 of 4