Page 4 - Fast; Stop the engine and unplug the; Have the garden; In case of fire, stop the engine; Take fire-extinguishing; ASSEMBLY; Pay attention to the bolts.
4 11. Close the tank lid immediatelyafter filling the tank. Make sure that itis properly closed. 12. Never use the product without anair filter. EMERGENCY Familiarize yourself with the useof this product by means of thisinstruction manual. Memorize thesafety directions and follow themto the letter. ...
Page 5 - CUTTING OPTIONS
5 SHAFT 1. Remove the protection cap from the lower shaft (22) (Fig.4). 2. Align the lower shaft (22) with the clamp (15) so that the slot isorientated to the slot in the clamp(Fig. 5). 3. Press the locking lever (17) and insert the lower shaft (22) into theupper shaft (23). The locking levermust en...
Page 8 - OPERATION
8 CARBURETOR If the cutting heads fail to operate at operational speed the carburetor mayneed to be adjusted. Please contactan authorized service center orqualified person to adjust it. OPERATION PREPARATION 1. Prior to use, first check the product for damage or any signs of wear,particularly if the...
Page 10 - Head; SPOOL
8 [email protected] CARE & MAINTENANCE WARNING: Always switch theproduct off, disconnect thespark plug connector, and letthe product cool down beforeperforming inspection,maintenance, and cleaningwork. 1. Keep the product clean andfree from debris after each useand before storage. 2. Inspect the...
Page 11 - Care; STORAGE; Fuel Handling
8 suitable cloth or enclosure to protect it against dust. WARNING: Do not place the product on its cutting means toavoid damage. 5. If you are not going to use the product for an extended period oftime (more than 3 months), andbefore storing it for the winter,empty the fuel tank (Refer to Care &...
Page 13 - DO NOT RETURN TO STORE
10 [email protected] North American Tool Industries (NATI) makes every effort to ensure that this product meets high qualityand durability standards. NATI warrants to the original retail consumer a 1-year limited warranty from thedate the product was purchased at retail and each product is free from...
Page 14 - Brush Cutter
88052623 09/13 Brush Cutter Model: 52623 For Customer Service, please call 1-800-348-5004 or email [email protected] 11
Page 15 - Parts List
88052623 09/13 12 For customer service, call 1-800-348-5004 or e-mail [email protected] Parts List
Page 16 - Description
13 [email protected] Parts List # Description # Description 1 Engine 23 Upper Shaft 2 Spark Plug Connector 24 Cable Tie (x2) 3 Air Vents 25 Hand Grip 4 Silencer 26 Loop 5 Recoil Starter Handle 27 Throttle Control 6 Fuel Tank 28 Throttle Safety Button 7 Fuel Tank Cap 29 Ignition Switch (ON/OFF) 8 Pri...