Page 2 - IMPORTANT SAFETY INSTRUCTIONS; WARNING; SAVE THESE INSTRUCTIONS
www.BISSELL.com 2 IMPORTANT SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USING YOUR VACUUM. When using an electrical appliance, basic precautions should be observed, including the following: WARNING TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY: » This appliance can be used by children a...
Page 4 - Product View
A B1 12 13 14 15 17 16 1819 20 21 23 24 25 22 1 2 3 4 5 6 7 8 9 10 11 2. 4. 1. 2. 3. 4. 6. 3. 1. 5. 3. 4. 2. B2 28 27 26 www.BISSELL.com 4 29 30 Product View Assembly (handle) Assembly (hose)
Page 6 - Assembly; B1-Attach handle to vacuum
Before using your vacuum, make sure that the dirt tank is in the locked position and that both filters (pre-motor and post-motor) are in place. Do not operate your vacuum without these filters. The rotating floor brush continues to rotate while tools are in use. To reduce the risk of injury from mov...
Page 7 - Operations; Power switch; Transporting cleaner
C Operations Power switch The Power switch is located on the left side of the vacuum. Push the rocker switch “ON” (I) to vacuum, and “OFF” (O) when cleaning is complete. C1-Handle position Press the handle release pedal with your foot to place your vacuum into one of three cleaning positions. 1. Upr...
Page 8 - Power cable storage
Power cable storage When you have finished using your BISSELL vacuum, return it to the upright position and store the power cable. 1. Turn vacuum cleaner off. 2. Unplug power cable by grasping the polarized plug (NOT the cable) and disconnect from socket. 3. Wrap power cable around cable wraps locat...
Page 9 - D4-Replace drive belt
D2-Replacing the post-motor filter Use only a genuine BISSELL replacement post-motor filter in your BISSELL vacuum. 1. Unplug the cleaner from electrical socket. 2. To access the post-motor filter, remove the filter tray located below the Easy Empty dirt tank. 3. When the filter becomes dirty, remov...
Page 10 - For any questions or concerns, BISSELL is happy to be; Please do; Troubleshooting
Problem Possible causes Remedies Vacuum cleaner won’t turn on Power cable not plugged in Check electrical plug Blown fuse/tripped breaker Check/replace fuse or reset breaker Vacuum cleaner won’t pick up dirt Incorrect height adjustment Adjust powerfoot to correct height setting Hose not attached to ...
Page 12 - Consumer Guarantee; Limited Two-Year Guarantee; Consumer Care; Visit the BISSELL website:; ENERG
12 ©2014 BISSELL Homecare, Inc Grand Rapids, Michigan All rights reserved. Printed in China Part Number 160-4322 Rev 04/14 Visit our website at: www.BISSELL.com Consumer Guarantee This Guarantee only applies outside of the USA and Canada. It is provided by BISSELL International Trading Company BV (“...