BISSELL Lift-Off- Manuals

Slide the end of the Hose Grip onto the Hose Grip Base. Place the Hose into the Hose Clip. NOTE: The Powerfoot will not operate effectively unless the Hose is firmly attached to the base. Snap the Telescoping Extension Wand, Crevice Tool, and Combination Tool into storage clips as shown. On Board Tu...

The Powerfoot on your BISSELL Lift-Off can be adjusted to clean several floor surfaces. NOTE: For optimal cleaning performance, adjust to the lowest practical setting. If your cleaner is dif- ficult to push, adjust to the next higher setting. Place Handle in Upright Position. Turn Height Adjustment ...

Telescoping Extension Wand: Use with desired attachment for a longer reach. To extend the Wand, twist the collar to “Unlock” position and push away from you. Twist the collar to the “Lock” position to lock into place. To retract, twist to unlock, pull toward you and twist to relock. TurboBrush TM (S...

9 Select Models Only The Shoulder Strap may be used while cleaning with the Detachable Canister. To attach the Shoulder Strap, wrap the Velcro ends attached to the bottom of the strap securely around the Canister handle as shown. The length of the strap may be adjusted as required for comfort Select...

Upper Tank Knob How to Maintain Your BISSELL Lift-Off To maintain maximum cleaning performance, the following maintenance steps must be performed: Empty the Dirt Container when the dirt reaches the “Full” line on the side. Check the Upper Tank and Pre-Motor Filters at least once a month and clean an...

Use only BISSELL Style 8 Replacement Filters in your BISSELL Lift-Off TM . Unplug the cleaner from electrical outlet. The Pre-Motor Filter protects the motor from dirt particles. It is located in the slide out tray underneath the Dirt Container. If the filter becomes dirty, pull out the tray, lift o...

Use only BISSELL Style 8 Replacement Belts (#3200C) in your BISSELL Lift-Off. Unplug cleaner from electrical outlet. With Rotating Floor Brush removed from vacuum cleaner (Steps 1-5 of Check Rotating Floor Brush and Drive Belt), grasp old Drive Belt and remove from Motor Pulley. Discard old Drive Be...

Low suction or poor pickup may be due to a clog in the vacuum cleaner. If you notice a change in the sound of the motor or a reduction in the spinning action, check for clogs. Unplug cleaner from electrical outlet. Empty Dirt Container. Check Upper Tank for build up or clogs. Remove the Upper Tank a...

Vacuum cleaner won’t run Possible Causes Remedies Power cord not plugged in Check electrical plug Blown fuse/tripped breaker Check/Replace fuse or reset breaker Thermal protector activated Allow cleaner to cool for 30 minutes, see pg. 13 No Power at Rotating Floor Brush Possible Causes Remedies Cani...

Replacement parts are available through BISSELL Consumer Services, an authorized BISSELL Service Centre or by visiting our website. To locate an authorized BISSELL Service Centre or to place an order using Visa or MasterCard, call BISSELL Consumer Services 1-800-263-2535 Monday - Friday 8 a.m. — 10 ...

Warranty 16 If you need additional instruction regarding this warranty or have questions regarding what it may cover, please contact BISSELL Consumer Services by e-mail, telephone, or regular mail as described below. Limited One Year Warranty Subject to the *EXCEPTIONS AND EXCLUSIONS identified belo...