BISSELL 9500E- Manuals

This user’s guide has been designed to help you get the utmost satisfaction from your BISSELL ProHeat 2X. You’ll find assembly and operating instructions, safety precautions, as well as maintenance and troubleshooting instructions. Please read this user's guide thoroughly before assembling your deep...

S pecial features 7 w w w . b i s s e l l . c o m Your BISSELL ProHeat 2X deep cleaner is a home cleaning system that uses the power of heat, brushes and cleaning formula to get the deep down dirt for a maximum clean. Not only does it come with a lot of unique features, it has been designed with you...

9 w w w . b i s s e l l . c o m O peration Before you clean 1. Plan activities to give your carpet time to dry. 2. Move furniture to another area if cleaning an entire room (optional). 3. Vacuum area with a dry vacuum cleaner thoroughly before deep cleaning. 4. Plan your cleaning route to leave an e...

10 w w w . b i s s e l l . c o m O peration Carpet cleaning 1. Fill the 2-in-1 Water Tank . Remove the tank from the base of the machine by lifting up the tank carry handle. Carry like a bucket to the sink. 1a. Unlatch the top of the tank from the bottom by lifting up on the tank latch which is loca...

16 w w w . b i s s e l l . c o m 11 O peration Carpet cleaning (continued) 5. Plug into a proper outlet and turn the power and heater switches to the ON ( I ) position. Allow 1 minute for the built-in heater to warm-up before cleaning. The ProHeat 2X will be fully warmed and will provide optimal per...

O peration Carpet cleaning (continued) 8b. Remove the top of the tank by lifting up on the handle. Note: Be sure to note how the lip on the top tank separates from the groove in the bottom tank. This placement is important when putting the tank back together. 8c. Lift the bottom portion of the tank ...

O peration Cleaning with attachments Your ProHeat 2X machine comes equipped with a hose and at least one attachment for cleaning stairs, upholstery, and more. 1. Important! If using to clean upholstery, check upholstery tags. A. Check manufacturer’s tag before cleaning. “W” or “WS” on the tag means ...

14 O peration Cleaning with attachments (continued) 8. Remove and rinse tools in clean, running water. Dry and replace in the tool caddy. 9. It is recommended that you suction clean water from the tap to rinse out the hose. 10. Before replacing, lift end of hose and stretch out to ensure all water i...

O peration Stain removal Do Not Delay! Attending to an accident soon after it occurs ensures the most optimal clean. Leaving it for an extended period of time may cause it to set and become permanent. 1. Blot up liquids with an absorbent cloth or paper towels. White materials are recommended because...

16 w w w . b i s s e l l . c o m O peration Hard floor cleaning Your ProHeat 2X model may have come with a hard floor attachment and Hard Floor Solutions formula. If not, these products are available for purchase by contacting the BISSELL Consumer Services department by phone. The hard floor tool pr...

17 w w w . b i s s e l l . c o m O peration Some models are equipped with a Scotchgard protector post-treatment applicator and cartridge. Use this, along with one of the BISSELL deep cleaning formulas containing Scotchgard, to help retain the carpet cleanliness achieved with the ProHeat 2X machine. ...

18 w w w . b i s s e l l . c o m 9. Be careful not to spray the Scotchgard protector onto furniture or fabric that has not been tested for colorfastness. If this does occur, wipe off the Scotchgard protector. 10. When finished remove the cartridge from the applicator tool. If formula is left, replac...

19 w w w . b i s s e l l . c o m Machine care For best results, a few simple steps can assure your machine is well maintained after your cleaning is complete. 1. Turn power and heater switches to the OFF ( O ) position. Unplug the machine and wrap the power cord. 2. After emptying the 2-in-1 water t...

21 w w w . b i s s e l l . c o m M aintenance and care Small belt removal and replacement Occasional replacement of one or both belts may become necessary. If that is needed, please follow the instructions below. 1. Turn off the machine and unplug it from the outlet. 2. Remove both the 2-in-1 water ...

22 w w w . b i s s e l l . c o m M aintenance and care Brush removal and large belt replacement Brushes can be removed for cleaning or replacement as needed. 1. Follow small belt removal instructions on page 21. 2. Remove brush rolls by pulling them off of the metal rods. 3. Place cleaned or new bru...

23 w w w . b i s s e l l . c o m T roubleshooting Built-in heater ready light does not illuminate Possible Cause Remedies 1. The heater switch is not turned ON ( I ). 1. Turn the heater switch ON ( I ). 2. The power switch is not turned ON ( I ). 2. Both switches must be ON ( I ) to activate the hea...

24 w w w . b i s s e l l . c o m T roubleshooting Cleaner not picking up solution Possible Causes Remedies 1 . ReadyTools dial may be at wrong setting. 1 . Set ReadyTools dial to either floor cleaning or tools setting. 2. 2-in-1 water tank may not be 2. Pick up both the 2-in-1 water tank and seated ...

25 w w w . b i s s e l l . c o m B ISSELL Consumer Services If your BISSELL product should require service: In the UK, Australia or New Zealand, call BISSELL Consumer Services at the numbers below and we will give you the location of a BISSELL Authorized Service Center in your area. For all other co...

26 w w w . b i s s e l l . c o m Below is a list of common replacement parts. While not all of these parts may have come with your specific machine, all are available to you for purchase, if desired. Item Part No. Part Name 1 203-6651 3” Tough Stain Tool 2 203-6652 Powered TurboBrush Hand Tool 3 203...

28 w w w . b i s s e l l . c o m ©2008 BISSELL Homecare, IncGrand Rapids, MichiganAll rights reserved. Printed in ChinaPart Number 120-4042Rev 5/08Visit our website at:www.bissell.com Scotchgard is a trademark of 3M W arranty - BISSELL ProHeat 2X This warranty gives you specific legal rights, and yo...