BISSELL 2908F - Manuals - manualsarea.com

Page 2 - IMPORTANT SAFETY INSTRUCTIONS; SAVE THESE INSTRUCTIONS; WARNING; IMPORTANT INFORMATION

2 global.BISSELL.com WARNING TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY: » Do not use outdoors or on wet surfaces. » Do not allow to be used as a toy. Close attention is necessary when used by or near children. Battery pack usage by children should be supervised. » Do not use for any purpo...

Page 3 - Thanks for buying a BISSELL® CleanView®

global.BISSELL.com 3 What’s in the Box? Safety Instructions . . . . . . . . . . . 2 Product View . . . . . . . . . . . . . . . . 4 Setup . . . . . . . . . . . . . . . . . . . . . 5-6 Operations . . . . . . . . . . . . . . . . 6-7 Maintenance & Care . . . . . . 7-10 Troubleshooting . . . . . . . ...

Page 4 - Product View

4 global.BISSELL.com Product View WARNING Do not plug in your robot until you are familiar with all instructions and operating procedures. 3 3 12 7 3 3 4 4 4 8 8 10 11 13 1. Power Switch 2. Start/Pause Button 3. Contact Points (for automatic charging) 4. Cliff Sensors 5. Bumper 6. Edge Cleaning Brus...

Page 5 - Setting Up Your Robot; Connecting to the App

global.BISSELL.com 5 3 40" 40" 40" 2 1 Setting Up Your Robot Place the back of docking station firmly against a wall. Ensure there are at least 40 inches to one side, 40 inches to the opposing side and no obstructions in front of the docking station. Insert the docking station power adap...

Page 7 - Cleaning the Dirt Bin; Activating Low Power Mode

global.BISSELL.com 7 1 4 6 1 3 2 5 2 Cleaning the Dirt Bin Press the button on top of the dirt bin and pull to remove. Use the cleaning tool to brush the filter cover and filters. Do not wash the filters. Open filter door by pulling both sides apart. Empty the debris from the dirt bin. With filters ...

Page 8 - Replacing the Edge Cleaning Brushes; Cleaning the Brush Roll

8 global.BISSELL.com A Phillips-head screwdriver is required for this task. 1 2 Use a Phillips-head screwdriver to remove the screw. Pull up on the base of the brush. Push the brush directly onto the holder. Replace the screws with a Phillips-head screwdriver. Replacing the Edge Cleaning Brushes NOT...

Page 9 - Replacing the Battery; Cleaning the Sensors

global.BISSELL.com 9 1 3 4 2 Replacing the Battery DO NOT REMOVE THE PLASTIC SHRINK SLEEVE FROM THE BATTERY PACK. Use a Phillips-head screwdriver to replace the battery cover. A Phillips-head screwdriver is required for this task. Turn the power switch OFF. Use a Phillips-head screwdriver to remove ...

Page 11 - Warranty

global.BISSELL.com 11 NOTE: Please keep your original sales receipt. It provides proof of the date of purchase in the event of a warranty claim. See warranty for details. This warranty gives you specific legal rights, in addition to rights you may have under the Australian Consumer Law . If you need...

BISSELL 2908F - Manuals

Manuals:

User Manual BISSELL 2908F

Summary