Page 2 - We’re glad you purchased a BISSELL SpotLifter; BISSELL Consumer Services; Saturday
Thanks for buying a BISSELL SpotLifter ® Powerbrush We’re glad you purchased a BISSELL SpotLifter ® PowerBrush Handheld Deep Cleaner. Everything we know about floor care went into the designand construction of this handy, home cleaning product. Your BISSELL SpotLifter ® PowerBrush is well made, and ...
Page 3 - IMPORTANT SAFETY INSTRUCTIONS; WASH HANDS AFTER HANDLING; SAVE THESE INSTRUCTIONS; Improper connection
IMPORTANT SAFETY INSTRUCTIONS ■ Unplug from outlet when not in use and beforeconducting maintenance and troubleshooting. ■ Unplug by grasping the plug, not the cord. Donot unplug by pulling on cord. ■ Always connect to a properly grounded outlet;see grounding instructions. ■ Do not modify the 3-pron...
Page 4 - Product View
6 Power Cord 5. Manual Trigger Spray 8. Belt Cover Door Product View 4 CAUTION: Use only BISSELL Little Green ® formula in your cleaner. Use of cleaning formulas which containlemon or pine oil may damage thisappliance and void warranty. Do not use chemical spot cleaners or solvent-based soil remover...
Page 5 - SpotLifter
Power Switch (Black). Turns on the unit. O = “OFF” position I = “ON” position Clean/Solution Tank. Holds Little Green ® Formula and water. Clean/Solution Tank Tabs. Gently press into remove the Clean/Solution Tank. Dirty/Collection Tank. Collects dirty water and solution. You will need to remove the...
Page 6 - How To Use Your SpotLifter
6 Remove the Clean Tank by gently pressing the QuickRelease tabs on the Clean Tank and sliding the tank offof the unit. Open the tank by unscrewing and removing the cap.Add water and formula* to the indicated fill lines on theClean Tank. *NOTE: Your SpotLifter PowerBrush includes an 8 oz. Trial size...
Page 7 - Cleaning Continued
Brushing and Suction can be done separately, based onhow you hold and use the unit. To Use The Dual Powerbrushes Only: Tilt the unit forward slightly, placing both brushes in con-tact with the carpet. The flat surface of the brush car-tridge should be parallel to the surface being cleaned For Suctio...
Page 8 - To Empty the Dirty/Collection Tank
8 Clean-Up/Storage Turn the power switch to the “OFF” position. ( O ) Unplug the unit. Carry the SpotLifter PowerBrush to the sink or drain. First you need to remove the Clean/Solution Tank. Gentlypress the Quick Release tabs on the Clean/Solution Tankand slide the tank off of the unit. Grab the Dir...
Page 9 - Putting It Away; To Replace the PowerBrush Belt
9 Tip: If you do not have the BrushCartridge in all the way, theDual Powerbrushes will notrotate. Firmly push the cartridge in place, while listening for the “snap” toknow it is in all the way Putting It Away Store in a dry area, at room temperature to avoid freezing. If the belt should break, to re...
Page 10 - Troubleshooting; Reduced spray or no spray.
Troubleshooting Cleaner won’t run. Possible Causes Remedies Power cord not plugged in Check electrical plug Blown fuse/tripped breaker Replace household fuse or reset breaker C.I.D. needs to be reset Reset C.I.D. (page 5) Reduced spray or no spray. Possible Causes Remedies Spray Nozzle clogged Clean...
Page 11 - Replacement Parts; Item
Replacement Parts Item Part No. Part Name 1 203-2501 Clean/Solution Tank w/Cap 2 203-2502 Clean/Solution Tank Cap Only 3 203-2513 Dirty/Collection Tank w/Plug 4 203-2504 Dirty/Collection Tank Plug Only 5 203-2514 Brush Cartridge 6 203-2517 Belt Cover 7 203-2516 Belt CLEANING FORMULAS 8 497 64 oz. Li...
Page 12 - About Your Warranty; Limited; One; Year Warranty; If your BISSELL product should require service:
About Your Warranty This warranty gives you specific legal rights, and you may also have other rights whichmay vary from state to state. If you need additional instruction regarding this warrantyor have questions regarding what it may cover, please contact BISSELL ConsumerServices by e -mail, teleph...