BISSELL 16981 - Manuals

SmartMix ® Provides custom control for each cleaning job.1. Lift the SmartMix ® concentrate bottle up out of the machine base. 2. Flip the bottle over so that the valve cap is in an upward position. 3. Unscrew the valve cap and fill the bottle to the mark with BISSELL Fiber Cleansing Formula. ™ 4. R...

7 NOTE: Both the SmartMix ® Bottle and the clean water tank must have liquid inthem in order for the machine to spray. If one tank is empty the machine will notapply either cleaning solution or wateronly. If you’re using the WATER ONLY setting, fill the SmartMix ® Bottle with water also. Tilt Handle...

8 4. Set the tank down and rotate the handle forward to unlatch the lid. Lift off and set the lid aside. 5. Find the mouth of the bladder and fill to the bottom of the neck with hot tap water. NOTE: Fill the Bladder with water only. 6. Replace the tank lid matching the lid and tank edges. Handle mus...

9 Tip: A special red float device inthe tank willcause the cleaner to stop removingsolution fromthe carpet andthe motor soundwill rise in pitchto let you knowthe dirty watertank is full. The Flow Indicator This is located on the machine base. It spins when the trigger is pressed to indicate that the...

10 1. Plan activities to give carpet time to dry.2. Remove easily moved furniture from the room (chairs, lamps, coffee tables, etc). 3. Vacuum thoroughly to pick up loose debris and pet hair before using the POWERSTEAMER ® PROHEAT ™ PLUS. 4. Plan your cleaning route to leave an exit path. It is best...

11 How to clean upholstery and small areas Manufacturer’s Tag Tip: Deep cleaning carpeting andupholstery regularly canreduce dust andallergens in your home. Important - Check Upholstery Tags: 1. Check manufacturer’s tag before cleaning. “W” or “WS” on the tag means you can use your POWERSTEAMER ® PR...

12 Cleaning bare floors Tilt HandleBack Carrying Bottom Front Edge ofMachine Base Snap Together Bare Floor Cleaning Tool Handle Release The Bare Floor Tool provides effective cleaning forlinoleum, vinyl, and tile floors. Caution: Do not use on hardwood floors. 1. Use only BISSELL Floor Cleansing For...

13 Machine Preparation 12. Set up machine following instructions in The Basics section, pages 5-9. Be sure to thoroughly rinse out anyremaining Fiber Cleansing Formula ™ to prevent slippery linoleum, vinyl, and tile floors. Use BISSELL Floor Cleansing Formula ™ in the SmartMix ® tank. 13. Check Read...

1. Turn Power and SmartTemp ™ switches OFF. 2. Unplug power cord from the outlet and coil around machine cord wrap. 3. Remove and rinse tools in clean, running water, dry and replace in tool caddy. 4. Coil flex hose around storage brackets on tool caddy.5. Remove Tank-in-Tank, ™ dispose of dirty wat...

SmartTemp ™ Ready Light does not illuminate. Possible Causes Remedies The SmartTemp ™ switch is Turn On the SmartTemp ™ switch. not turned ON.The machine Power Switch is Both switches must be ON to activate the not turned ON. SmartTemp ™ Ready Light. SmartTemp ™ Power Switch does not illuminate. Pos...

16 Dirtlifter ® PowerBrush ® does not turn. Possible Causes Remedies The Brush Belt or Pump Belt Turn the machine OFF and unplug from the may be broken. outlet. To check if a Brush Belt has broken,you will need a flat head screwdriver.Insert the blade end into the lower slot of theBelt Access door t...

17 Item Part No. Part Name 1 010-9201 4” Small Area Tool 2 603-0910 6” Stair Tool 3 010-9148 Spraying Crevice Tool 4 010-1185 TurboBrush ™ 5 014-9131 Bare Floor Tool 6 014-9142 PreTreat Wand 7 015-9155 Tough Stain Brush 8 013-0212 Baffle 9 014-0325 Red Float 10 015-9040 Tank Assembly 11 010-6241 Tan...

18 “ASK ANNA”Product InformationPurchase Products & Partshttp://www.bissell.com About your warranty This warranty gives you specific legal rights, and you may also haveother rights which may vary from state to state. If you need additionalinstruction regarding this warranty or have questions reg...