BISSELL 1698 - Manuals

5 How To Put It Together How To Use This Guide This User’s Guide has been designed to help you get the utmost satisfaction from your BISSELL PowerWash ProHeat. You’ll find assembly and operating instructions, safety precautions, as well as maintenance and troubleshooting instructions. Please read th...

6 Special Features of your BISSELL PowerWash ProHeat™ The PowerWash ProHeat is a home cleaning system that automatically mixes hand hot tap water with BISSELL Advanced Deep Cleaning Formula and heats the solution as it is applied to the carpet. The combination of heated cleaning solution, powered br...

7 SmartMix Continued Replace SmartMix Bottle. Choose the SmartMix setting that fits the cleaning job. Water Only - use for gentle cleaning or for the final rinse after cleaning. Normal - automatically provides the best mix of water and cleaning solution for most cleaning jobs. High Traffic - automat...

Remove Tank Lid by rotating handle forward to unlatch lid and lifting lid off Tank. Pour out dirty water. After each use, remove and rinse the Lint Screen located on the tank lid. A. Remove Tank Assembly from unit. B. Remove Tank Lid. C. Remove any debris caught in Lint Screen. D. Re-insert Lint Scr...

Unplug cleaner from the outlet before attaching TurboBrush. Attach TurboBrush to the Flex Hose by pressing tool onto the grip/trigger until button snaps into hole. Make certain tool is securely in place. Move the TurboBrush switch to the “ BRUSH ” position. This activates the brush when the unit is ...

11 Set up the machine following instructions in the Features section on pages 6-10. Use any BISSELL Advanced Deep Cleaning Formula in the SmartMix Bottle when cleaning carpets, stairs or upholstery. Use clean water in the SmartMix Bottle for gentle cleaning or rinsing. Choose the SmartMix setting to...

Repeat cleaning passes until solution being pulled up appears clean. Continue passes without pressing the trigger until you can’t see any more water being pulled up. Note: Both the SmartMix Bottle and the clean water Tank must have liquid in them in order for the machine to spray. If one is empty, t...

14 Choose the 4” Small Area Tool, the 3” Tough Stain Tool, or the Spraying Crevice Tool and connect to the Flex Hose. Plug into a proper outlet and turn Power Switch ON. While pressing the trigger, slowly move the spraying tool back and forth over the soiled surface. Release the trigger to suction s...

16 Routine Maintenance Continued Remove and rinse tools in clean, running water. Dry and replace on Tool Caddy. Coil Flex Hose around storage brackets on Tool Caddy. Remove Tank-In-Tank, dispose of dirty water. Refer to the Features section on Pages 8-9. Rinse out Tank-In-Tank and replace on the mac...

17 Remove the black brush arm that holds the brush in place. Set the black brush arm aside (see illustration). Remove the “toothed” Brush Belt from the brush then from the red pump pulley. Set the “toothed” Brush Belt and brush aside. Locate and remove broken Pump Belt. With the unit still on its si...

SmartTemp Ready Light Does Not Illuminate. Possible Causes Remedies The Power Switch is not turned ON. Turn the Power Switch ON. Reduced Spray OR No Spray. Possible Causes Remedies Bladder may be empty. Refill Bladder with clean hand hot tap water. SmartMix Bottle may be empty. Fill with any BISSELL...

19 Replacement Parts - BISSELL PowerWash ProHeat Item Part No. Part Name 1* 210-9213 4” Small Area Tool 2* 603-0910 6” Stair Tool 3* 210-9148 Spraying Crevice Tool 4* 210-1197 TurboBrush™ 5* 214-9131 Bare Floor Tool 6* 214-9142 PreTreat Wand 7* 214-9150 3” Tough Stain Tool 8 015-9043 Tank Assembly C...

20 ©2003 BISSELL HOMECARE, Inc.Grand Rapids, MichiganAll rights reserved. Printed in USA.Part Number 310-5808Rev 04/03 Visit our website at:www.bissell.com About Your Warranty This warranty gives you specific legal rights, and you may also have other rights which may vary from country to country. If...