BISSELL 1620 - Manuals

This User’s Guide is designed to help you get maximum satisfaction from your PowerLifter Plus Deep Cleaner. Enclosed you’llfind assembly instructions for cleaning tasks, safety precautions,cleaning tips, maintenance and troubleshooting information. Pleaseread this Guide thoroughly before assembling ...

6 The Basics: How Your PowerLifter Plus Works Tip: Deep cleaning carpeting and upholstery regularly canreduce dust and allergens in your home. Power The Power Switch controls power to the machine. The powered brush roll at the Floor Nozzle is designed to enhancecleaning performance. The bristle patt...

8 When It’s Time To Empty The Tank-in-Tank NOTE: Remove the Tank-in-Tank, following steps 1and 2 on page 7. Carry the Tank-in-Tank, like a bucket, to the sink to disposeof the dirty water. Remove Tank Lid. Pour out dirty water. After each use, remove and rinse the red Lint Screenlocated on the Tank ...

Plan activities to give carpet time to dry. Remove furniture from the room (chairs, lamps, coffeetables, etc.). Vacuum thoroughly to pick up loose debris and pet hairbefore using the PowerLifter Plus. Plan your cleaning route to leave an exit path. It is best tobegin cleaning in the corner furthest ...

10 Normal Cleaning Plug the PowerLifter Plus into a proper outlet and turn thePower Switch ON. Set the ReadyTools Dial to FLOORCLEANING While pressing the Spray Trigger, make one slow forwardand back wet pass. Let the BISSELL Deep CleaningFormula and DirtLifter PowerBrush do the work for you. Cautio...

11 Check manufacturer’s tag before cleaning. A "W" or "WS" onthe tag means you can use your PowerLifter Plus. If the tag iscoded with an "X" or "S" (with a diagonal strike through), orsays "Dry Clean Only," do not proceed. Do not use yourPowerLifter Plus on ve...

Connect the Tough Stain Tool to the Flex Hose. Plug into a proper outlet and turn the Power Switch ON. While pressing the trigger, slowly move the spraying tool backand forth over the soiled surface. Release the trigger to suctionsoiled water. Continue to clean soiled area, working in small sections...

13 Maintenance/Storage Continued Rinse out Tank-in-Tank and reseat the tank ontothe machine. Clean out the Flow Indicator Filter each time it isused to ensure best cleaning performance. Unscrewthe Flow Indicator cap, lift out the red Rotor andwhite Filter. Rinse all three parts in tap water.Replace ...

14 To Remove Broken Pump & Brush Belts-Continued Turn the machine onto its side so the belt access area isfacing upward (see illustration). On the bottom of the machine, near the belt access area, isa red Retainer Plate that holds the black brush arm andbrush in place. Using a Phillips head scre...

15 To Install The Replacement Pump & Brush Belts With the unit still on its side, loop one end of the replacementPump Belt around the red Pump Pulley and the other end aroundthe silver motor shaft (see illustration). Do not twist the replacementPump Belt. Re-install the “toothed” Brush Belt firs...

16 To Install The Replacement Pump & Brush Belts-Continued Re-install the red Retainer Plate and Phillips head screw(see illustration). Using your finger, gently spin the replacement Pump Belt on the silver motor shaft (see illustration). If assembled correctly, the replacement Pump Belt should ...

WA R N I N G : To reduce the risk of fire,electric shock, or injury,unplug machine fromoutlet before servicing. Reduced spray or no spray. Possible Causes Remedies Bladder may be empty Turn power OFF, refill tank with hot tap water. SmartMix may be empty Refill bottle with formula. The lint screen m...

PowerLifter Plus is not picking up solution. Possible Causes Remedies ReadyTools Dial may be at the Set ReadyTools Dial to either FLOOR wrong setting for cleaning job CLEANING or TOOLS/PRETREAT. Nozzle Window may not be Make sure the two tabs on the back of properly attached the Floor Nozzle Window ...

Item Part No. Part Name 1 213-4032 Handle Assembly with Screw 2 215-9155 Tough Stain Tool 3 015-9043 Tank Assembly Complete 4 015-4439 Tank Lid Assembly 5 015-9041 Tank Bottom 6 213-0213 Baffle with Red Float 7 210-4052 Window Gasket 8 215-0628 Replacement Pump Belt (with instructions) 9 015-0621 Re...

About Your Warranty This warranty gives you specific legal rights, and you may also have other rights whichmay vary from state to state. If you need additional instruction regarding this warrantyor have questions regarding what it may cover, please contact BISSELL ConsumerServices by E-mail, telepho...

This User’s Guide is designed to help you get maximum satisfaction from your PowerLifter Plus Deep Cleaner. Enclosed you’llfind assembly instructions for cleaning tasks, safety precautions,cleaning tips, maintenance and troubleshooting information. Pleaseread this Guide thoroughly before assembling ...

6 The Basics: How Your PowerLifter Plus Works Tip: Deep cleaning carpeting and upholstery regularly canreduce dust and allergens in your home. Power The Power Switch controls power to the machine. The powered brush roll at the Floor Nozzle is designed to enhancecleaning performance. The bristle patt...

8 When It’s Time To Empty The Tank-in-Tank NOTE: Remove the Tank-in-Tank, following steps 1and 2 on page 7. Carry the Tank-in-Tank, like a bucket, to the sink to disposeof the dirty water. Remove Tank Lid. Pour out dirty water. After each use, remove and rinse the red Lint Screenlocated on the Tank ...

Plan activities to give carpet time to dry. Remove furniture from the room (chairs, lamps, coffeetables, etc.). Vacuum thoroughly to pick up loose debris and pet hairbefore using the PowerLifter Plus. Plan your cleaning route to leave an exit path. It is best tobegin cleaning in the corner furthest ...

10 Normal Cleaning Plug the PowerLifter Plus into a proper outlet and turn thePower Switch ON. Set the ReadyTools Dial to FLOORCLEANING While pressing the Spray Trigger, make one slow forwardand back wet pass. Let the BISSELL Deep CleaningFormula and DirtLifter PowerBrush do the work for you. Cautio...

11 Check manufacturer’s tag before cleaning. A "W" or "WS" onthe tag means you can use your PowerLifter Plus. If the tag iscoded with an "X" or "S" (with a diagonal strike through), orsays "Dry Clean Only," do not proceed. Do not use yourPowerLifter Plus on ve...

Connect the Tough Stain Tool to the Flex Hose. Plug into a proper outlet and turn the Power Switch ON. While pressing the trigger, slowly move the spraying tool backand forth over the soiled surface. Release the trigger to suctionsoiled water. Continue to clean soiled area, working in small sections...

13 Maintenance/Storage Continued Rinse out Tank-in-Tank and reseat the tank ontothe machine. Clean out the Flow Indicator Filter each time it isused to ensure best cleaning performance. Unscrewthe Flow Indicator cap, lift out the red Rotor andwhite Filter. Rinse all three parts in tap water.Replace ...

14 To Remove Broken Pump & Brush Belts-Continued Turn the machine onto its side so the belt access area isfacing upward (see illustration). On the bottom of the machine, near the belt access area, isa red Retainer Plate that holds the black brush arm andbrush in place. Using a Phillips head scre...

15 To Install The Replacement Pump & Brush Belts With the unit still on its side, loop one end of the replacementPump Belt around the red Pump Pulley and the other end aroundthe silver motor shaft (see illustration). Do not twist the replacementPump Belt. Re-install the “toothed” Brush Belt firs...

16 To Install The Replacement Pump & Brush Belts-Continued Re-install the red Retainer Plate and Phillips head screw(see illustration). Using your finger, gently spin the replacement Pump Belt on the silver motor shaft (see illustration). If assembled correctly, the replacement Pump Belt should ...

WA R N I N G : To reduce the risk of fire,electric shock, or injury,unplug machine fromoutlet before servicing. Reduced spray or no spray. Possible Causes Remedies Bladder may be empty Turn power OFF, refill tank with hot tap water. SmartMix may be empty Refill bottle with formula. The lint screen m...

PowerLifter Plus is not picking up solution. Possible Causes Remedies ReadyTools Dial may be at the Set ReadyTools Dial to either FLOOR wrong setting for cleaning job CLEANING or TOOLS/PRETREAT. Nozzle Window may not be Make sure the two tabs on the back of properly attached the Floor Nozzle Window ...

Item Part No. Part Name 1 213-4032 Handle Assembly with Screw 2 215-9155 Tough Stain Tool 3 015-9043 Tank Assembly Complete 4 015-4439 Tank Lid Assembly 5 015-9041 Tank Bottom 6 213-0213 Baffle with Red Float 7 210-4052 Window Gasket 8 215-0628 Replacement Pump Belt (with instructions) 9 015-0621 Re...

About Your Warranty This warranty gives you specific legal rights, and you may also have other rights whichmay vary from state to state. If you need additional instruction regarding this warrantyor have questions regarding what it may cover, please contact BISSELL ConsumerServices by E-mail, telepho...