BISSELL 1225E- Manuals

www.bissell.com 5 Your deep cleaner comes in four easy-to- assemble components: Upper Handle with Screws Lower Base Upper Hose/Cord Rack Lower Hose/Cord Rack The only tool you will need to assemble your cleaner is a Phillips head screwdriver. 1. slide upper handle onto lower base and secure with two...

Special features Scotchgard™ protector Carpet protection applied at the mill typically wears down over time from heavy foot traffic and everyday cleaning, including deep cleaning. To help restore this important protection, only bissell offers deep cleaning formulas with scotchgard protector. This of...

filling the 2-in-1 water tank 1. Remove tank from base of machine by lifting tank carry handle. Carry like a bucket to the sink. 2. Pull upward on bottom edge of latch in the back of tank to unhook and remove lid. 3. Pull up on bladder fill cover that says “Fill Here”. Fill the bladder with hand hot...

Operations Empty the 2-in-1 water tank/ clean removable nozzle 1. Press power pedal off. Remove 2-in-1 water tank from base using tank carry handle. Carry tank like a bucket to a utility sink or outside where you will dispose of dirty water. 2. Pull upward on bottom edge of latch in the back of tank...

3. set ReadyTools dial to TOOls setting. This will allow spray and suction from hose. 4. Attach cleaning tool of your choice to end of hose. notE: If your deep cleaner came with a Deep Reach tool, do not follow the cleaning tool instructions below. Instead, follow the “cleaning with Deep Reach tool”...

machine care For best results, a few simple steps can assure your machine is well maintained after cleaning is complete. 1. Flush your machine of any remaining residual solution. a. Fill 2-in-1 water tank with clean hand hot (60°C/140°F MAX) tap water. b. Recline handle and press spray trigger for 1...

Troubleshooting problem possible causes Remedies Reduced spray oR no spray bladder may be empty. Press power pedal off; refill bladder with clean hand hot (60°F/140°C MAX) tap water and formula. 2-in-1 tank may not be seated properly. Press power pedal off; remove tank and reseat tank. Pump may have...

www.bissell.com 14 Replacement Parts These items are available for your BISSELL deep cleaner. Visit www.BISSELL.com pArt # pArt nAme pArt # pArt nAme 160-3026 Tank Assembly Complete 160-3027 Tank Base 160-2858 Removable Nozzle 160-1543 Replacement Pump Belt (with instructions) 160-1542 Replacement B...

Accessories These items are available for your BISSELL deep cleaner. Visit www.BISSELL.com www.bissell.com pArt # pArt nAme pArt # pArt nAme 160-1523 Hard Floor Tool 203-6651 3" Tough Stain Tool 203-6653 4" Upholstery Tool 203-6654 6" Stair Tool 203-6652 Powered TurboBrush™ Tool 203-0116...

©2013 BISSELL Homecare, Inc Grand Rapids, Michigan All rights reserved. Printed in China Part Number 160-3428 Rev 01/14 RevA Visit our website at: www.BISSELL.com Scotchgard is a trademark of 3M Microban® is a registered trademark of Microban Products Company 16 Consumer Guarantee This Guarantee onl...