Billi 915100LBG - Manuals

2 Components for Billi B-5000 Before commencing installation, ensure you have identified the following.1. Underbench module 2. Dispenser upper with tubing 3. Dispenser base & mount 4. Barb locking bush 5. 4mm chrome screw & allen key6. Large washer7. Tube spring clamps x 38. 600mm flexible b...

3 1. Install Dispenser Assembly Determine position of dispenser mounting hole in sinktop or benchtop. Dispenser base template (Diagram 4) may be cut out and used to assist in correct positioning. Refer to Diagram 2 for clearances allowed. Hole size required is ø32mm. Stainless Steel Sinktop A suitab...

4 Install Cabling Feed the cable through pre cut hole.Screw and fasten the cable strain bracket to the back of remote tap module.Secure the tap module by sliding it onto the previously installed bracket – see diagram 15. Completing Installation Ensure panel is secured.Clean up any excess plaster.Ins...